Hammond Power CD1X0045F1 - dV/dT filter 45 amperes up to 600 volts open style 1000 feet
Hammond Power

CD1X0045F1

UPC: 803423189921

Documents & Media
BrochureInstallation InstructionsSpecification Sheet

Contact for Pricing

Overview

The Hammond Power Solutions (HPS) CD1X0045F1 dV/dT filter, SKU CD1X0045F1, is engineered to protect motors from voltage spikes generated by variable frequency drives (VFDs) when operating over extended motor cable lengths. This open-style filter is rated for 45 amperes and up to 600 volts, making it suitable for high-duty industrial applications. It is specifically designed to mitigate the detrimental effects of long cable runs, up to 1000 feet, which can cause insulation stress, bearing wear, and insulation breakdown. By reducing dv/dt, the CD1X0045F1 helps extend motor lifespan and ensures reliable operation. Its compact open-frame design facilitates straightforward integration into control panels or enclosures. Manufactured in France, this filter is ideal for applications such as pumps, fans, and conveyors where extended cable lengths are a necessity. It aligns with UNSPSC code 83101808. The CD1X0045F1 is an open-style dV/dT filter. It is rated for a maximum current of 45 amperes. The maximum voltage rating for this filter is 600 volts. The filter is designed to operate with motor cable lengths up to 1000 feet. This product is manufactured in France.
  • The dV/dT filter combines an inductor and parallel resistor network to mitigate both high frequency components and voltage spikes between the VFD and motor.
  • The filter can mitigate the effects of reflected wave voltages greater than what a reactor alone can accomplish.
  • The filter provides protection to the motor by slowing down the rate of voltage increase and minimizes the damaging peak voltages that occur within the motor’s windings and along the length of cables feeding the motor.
  • Reduces insulation stress and extends motor lifespan
  • Compact open-frame design for easy integration

Specifications

Application
Designed for applications with long cables between the VFD and the motor
Cooling
Natural Convection
Current Rating
45 A
Enclosure
Open Frame
Height
44 IN
Inverter Specification
Switching Frequency: 2kHz - 4kHz, Operating Frequency: up to 60Hz
Length
16 IN
Maximum Ambient Temperature
40C (suitable to 50C)
Minimum Ambient Temperature
-25C
Mounting
Wall/Ceiling/Floor Mount
Mounting Type
Open Style
Peak Voltage
at Motor: 150% of DC bus voltage
Series
CD1X
Series
dV/dT Filter
Standard
cUL
Voltage Rating
up to 600V
Voltage Rating
600 V
Weight
1000 lbs
Width
23 IN
Package Dimensions (L x W x H)
6 IN x 8 IN x 7.25 IN
Package Dimensions (L x W x H)
152.4 mm x 203.2 mm x 184.15 mm
Package Weight (Imperial)
14.0000 L
Package Weight (Metric)
6.2000 kg
dV/dT filter 54 amperes up to 600 volts open style 1000 feet

CD1X0054F1

dV/dT filter 54 amperes up to 600 volts open style 1000 feet
dV/dT filter 35 amperes up to 600 volts open style 1000 feet

CD1X0035F1

dV/dT filter 35 amperes up to 600 volts open style 1000 feet
dV/dT filter 27 amperes up to 600 volts open style 1000 feet

CD1X0027F1

dV/dT filter 27 amperes up to 600 volts open style 1000 feet
dV/dT filter 65 amperes up to 600 volts open style 1000 feet

CD1X0065F1

dV/dT filter 65 amperes up to 600 volts open style 1000 feet
dV/dT filter 22 amperes up to 600 volts open style 1000 feet

CD1X0022F1

dV/dT filter 22 amperes up to 600 volts open style 1000 feet
dV/dT filter 17 amperes up to 600 volts open style 1000 feet

CD1X0017F1

dV/dT filter 17 amperes up to 600 volts open style 1000 feet
dV/dT filter 80 amperes up to 600 volts open style 1000 feet

CD1X0080F1

dV/dT filter 80 amperes up to 600 volts open style 1000 feet
dV/dT filter 108 amperes up to 600 volts open style 1000 feet

CD1X0108F1

dV/dT filter 108 amperes up to 600 volts open style 1000 feet
dV/dT filter 12 amperes up to 600 volts open style 1000 feet

CD1X0012F1

dV/dT filter 12 amperes up to 600 volts open style 1000 feet
dV/dT filter 7 amperes up to 600 volts open style 1000 feet

CD1X0007F1

dV/dT filter 7 amperes up to 600 volts open style 1000 feet
dV/dT filter 4 amperes up to 600 volts open style 1000 feet

CD1X0004F1

dV/dT filter 4 amperes up to 600 volts open style 1000 feet
dV/dT filter 3 amperes up to 600 volts open style 1000 feet

CD1X0003F1

dV/dT filter 3 amperes up to 600 volts open style 1000 feet

How to Install the HPS Centurion P Passive Harmonic Filter

This guide provides step-by-step instructions for the installation and initial setup of the HPS Centurion P Passive Harmonic Filter, ensuring safe and effective operation.

Estimated time: 1h

Tools needed:

Screwdriver, Wire strippers, Multimeter, Forklift or hoisting equipment

Supplies needed:

Mounting screws, Terminal connectors, Grounding wire

  1. Inspect the unit

    Immediately after receiving the Passive Harmonic Filter, inspect it for any transit damage and verify it against the shipping documents. If any damage is noted, file a claim with the carrier.

  2. Choose the installation location

    Select a location that is accessible, well-ventilated, and free from contaminants. Ensure there is at least 6 inches of clearance around the unit for proper airflow.

  3. Mount the filter

    Using a forklift or hoisting equipment, securely position the Passive Harmonic Filter in the chosen location. Ensure it is level and stable.

  4. Ground the filter

    Connect the designated grounding wire to the main grounding location on the filter to ensure safe operation before energizing.

  5. Make electrical connections

    Connect the input terminals A1, B1, and C1 to the corresponding phases of the power supply, and connect A2, B2, and C2 to the load. Ensure all connections are tight and secure.

  6. Verify connections

    Use a multimeter to verify that all electrical connections are correct and that there is no voltage present before proceeding.

  7. Energize the system

    Once all connections are verified and secure, turn on the power supply to the Passive Harmonic Filter. Monitor for any unusual sounds or indicators.

  8. Perform initial testing

    Use a power quality analyzer to measure total harmonic distortion and power factor before and after connecting the filter to assess its performance.

Frequently Asked Questions about Hammond Power

What certifications and standards do Hammond Power products comply with?

Hammond Power products are certified to UL (Underwriters Laboratories) and CSA (Canadian Standards Association) standards in North America. Our products meet rigorous safety and performance requirements, with many items classified as UL Listed Products or Recognized Components. We also comply with international certifications including China Compulsory Certification (CCC), C-Tick for Australian EMC requirements, and ANCE for Mexico.

What is Hammond Power's warranty policy?

Hammond Power provides a standard one-year warranty on all products, covering defects in workmanship and materials. Products will be repaired or replaced free of charge if found defective upon factory inspection. The warranty does not cover damage from improper handling, incorrect application, or faulty installation.

What industries and applications are Hammond Power products used for?

Hammond Power products are engineered for critical industrial and commercial applications across multiple sectors, including petrochemical, mining, construction, renewable energy, e-mobility, power storage, and microgrids. Their comprehensive product range of dry-type transformers, power quality solutions, and magnetic components enables electrical distribution and electrification in diverse industrial environments worldwide.

What are the main product lines offered by Hammond Power?

Hammond Power Solutions offers a comprehensive range of dry-type and liquid-filled transformers for industrial and commercial applications. Their primary product lines include power transformers for renewable energy, e-mobility, data centers, microgrids, and industrial settings. The company provides both standard and custom-designed transformer solutions that are critical to electrical distribution networks across multiple industries.

What are the key features of Hammond Power products?

Hammond Power products feature advanced dry-type and liquid-filled transformers engineered for diverse industrial applications, with capabilities spanning renewable energy, e-mobility, data centers, microgrids, and industrial/commercial sectors. Key features include high-performance electrical steel laminations, windings available in copper or aluminum, advanced insulation systems (VPI or Cast Resin), Basic Impulse Level ranges from 10 kV to 250 kV, and custom design capabilities with over 3,000 unique transformer designs engineered annually.

What environmental ratings do Hammond Power products have?

Hammond Power offers industrial enclosures with comprehensive environmental ratings, including UL/cUL 508A ratings of Type 1, 2, 3, 4, 4X, 12, and 13. Their products meet IEC 60529 IP66 standards, providing robust protection against dust, water ingress, and harsh environmental conditions. Specific ratings vary by product series, with options ranging from indoor Type 1 enclosures to outdoor-rated Type 4X enclosures suitable for challenging industrial environments.

What technical support does Hammond Power offer?

Hammond Power Solutions provides comprehensive technical support through multiple channels. Customers can access technical resources via phone support in Canada, the United States, Mexico, and internationally, with toll-free numbers and regional contact points. Their technical team offers personalized assistance for custom design inquiries, helping customers find standard transformer and power solutions or develop specialized electrical products for various industrial applications.

What communication protocols do Hammond Power products support?

Hammond Power products support multiple industrial communication protocols, including Modbus RTU, PROFIBUS DP, PROFINET, EtherNet/IP, and CANopen. These protocols enable flexible connectivity across industrial automation platforms, supporting various network topologies and high-speed data transmission for comprehensive industrial control and monitoring applications.

What accessories are available for Hammond Power products?

Hammond Power offers a comprehensive range of accessories for industrial electrical components, including HME Series handles with key locking and padlocking options, door stop kits, light kit mounting brackets, and standard hardware like mounting screws and washers. These accessories are designed to enhance functionality and installation flexibility across their product lines.

How are Hammond Power products typically installed?

Hammond Power transformers are typically chassis-mounted using precise mounting hole centers and dimensions specific to each product series. Installation involves selecting the appropriate primary voltage configuration, securing the transformer to a mounting surface using the specified mounting holes, and connecting terminals according to the product's schematic. Most Hammond Power transformers feature multiple terminal options like solder or quick-connect terminals, allowing flexible and straightforward installation in industrial control and power distribution applications.