Hammond Manufacturing 1422PW8LP NEMA 12 TWO DOOR ENCL 24X48X8

This enclosure complies with UL 508A Type 12, CSA Type 12, NEMA Type 12, IEC 60529, and IP54 standards.

The enclosures are formed from 14 gauge steel, with 12 gauge steel used for inner panels. Larger sizes use 12 gauge steel for the enclosure and 10 gauge for inner panels.

It is designed to house electrical, electronic, hydraulic, or pneumatic controls and instruments, protecting them from falling dirt, dust, oil, and water.

Yes, the 1422PW8 model has enclosure dimensions of 24.00 in H x 48.00 in W x 8.00 in D, and panel dimensions of 21.00 in H x 45.00 in W.

The 1422RX10 model has enclosure dimensions of 30.00 in H x 60.00 in W x 10.00 in D, and panel dimensions of 27.00 in H x 57.00 in W.

The 1422VX12 model has enclosure dimensions of 42.13 in H x 60.06 in W x 12.69 in D, and panel dimensions of 38.00 in H x 56.00 in W.

The 1422WW12 model has enclosure dimensions of 48.13 in H x 48.06 in W x 12.69 in D, and panel dimensions of 44.00 in H x 44.00 in W.

The enclosure features continuously hinged doors with a handle, secured by a three-point latch and a key locking automotive type handle.

Gasketed overlapping doors eliminate the need for a center post, and oil resistant gaskets are permanently secured.

The cover and enclosure are finished in a recoatable smooth ANSI 61 gray powder coating, while the removable inner panel is white powder coated.

Hammond Manufacturing provides a standard one-year warranty on all products, covering defects in workmanship and materials. Products will be repaired or replaced free of charge if found defective upon factory inspection. The warranty does not cover damage from improper handling, incorrect application, or faulty installation.

Hammond Manufacturing products are certified to UL (Underwriters Laboratories) and CSA (Canadian Standards Association) standards in North America. Our products meet rigorous safety and performance requirements, with many items classified as UL Listed Products or Recognized Components. We also comply with international certifications including China Compulsory Certification (CCC), C-Tick for Australian EMC requirements, and ANCE for Mexico.

Hammond Manufacturing offers a comprehensive range of industrial enclosures and electrical components, including mild steel, stainless steel, aluminum, and non-metallic enclosures designed for diverse industrial applications. Their product lines cover critical industrial automation needs such as disconnect enclosures, operator interface enclosures, climate control solutions, and general accessories, with products engineered to meet Type 4, 4X, and 12 industrial standards.

Hammond Manufacturing offers enclosures with multiple environmental ratings across their product lines, including UL/cUL 508A ratings of Type 1, 2, 3, 4, 4X, 12, and 13. Their products also comply with IEC 60529 IP66 standards, providing robust protection against dust, water ingress, and harsh environmental conditions. Specific ratings vary by product series, with options ranging from indoor Type 1 enclosures to outdoor-rated Type 4X enclosures suitable for wet, corrosive, and high-temperature environments.

Hammond Manufacturing produces industrial enclosures and electrical components for multiple critical industries, including automation, electrical, audio, power systems, and control applications. Their product lines span mild steel, stainless steel, aluminum, and non-metallic enclosures designed for various NEMA types (Type 4, 4X, 12), as well as transformers, circuit board components, and climate control solutions for industrial and commercial environments.

Hammond Manufacturing offers comprehensive technical support through multiple channels. Customers can access technical references and CAD downloads directly on www.hammondmfg.com, and can contact regional support teams via phone in Canada, the USA, and internationally. For custom design inquiries, their technical team provides personalized assistance, helping customers find standard solutions or develop custom transformer and electrical enclosure designs.

Hammond Manufacturing offers a comprehensive range of industrial enclosures, power supplies, and electronic packaging solutions. Their primary product lines include electrical and electronic enclosures, power transformers, heat sinks, PCI/PCIe card enclosures, and specialized mounting hardware for industrial automation and electronic applications.

Hammond Manufacturing offers a comprehensive range of accessories for their industrial enclosures and electrical components. Key accessories include HME Series handles (swing and lift handles with key locking and padlocking options), door stop kits, and light kit mounting brackets. They also provide standard hardware like screws, washers, and mounting accessories specific to different product lines.

Hammond Manufacturing transformers are typically chassis-mounted using pre-drilled mounting holes and centers specified in their product dimension tables. Most models feature 3/16" diameter mounting holes and precise mounting centers, allowing for direct, secure installation onto equipment chassis or mounting plates. Installation requires aligning the transformer's mounting holes with corresponding mounting points and securing with appropriate fasteners.