Contact for Pricing
Overview
- 6 x 10/100TX Copper Ethernet Ports
- 1 x 100FX Multimode Fiber Port
- 2U Rack-mount Form Factor
- Industrial Ethernet Connectivity
- Reliable Data Transmission for Automation
Specifications
Article no. | 04420001000 x 000 xxx |
Assembly | DIN rail |
Basis | CE |
Connector | 4 pin terminal (redundant supply) / 4 pin terminal (2 x fault relay) / USB/Sub-DB9 |
Constructive design | Constructive design |
cUL61010 | 8TX, 6TX/2FX, 4TX/4FX |
Description | Fast-Ethernet-Switch, managed |
Dimensions (W x H x D) | 145 mm x 70 mm x 130 mm |
Failure relay (load capacity) | 24 VDC (1A) / 60 VDC (0,3 A) |
Fiber type / range / budget | Fiber type / range / budget |
Housing | Stainless steel, powder coated |
Management | SNMP-Management / Web-Interface-Management |
Manufacturer Page | https://www.eks-engel.de/en/products/industrial-network-technology/the-industrial-ethernet/el100-2ma/ |
MIB | RFC 1213 MIBII / RFC 1493 bridge MIB / RMON RFC 1757 / RFC 2674 VLAN MIB / RFC 1643 Ethernet as MIB / RFC 1215 Trap MIB private MIB for switch informations, ring, port alarm, TFTP firmware update, reset, port mirror, IP security management, IGMP management MIB |
Multimode 50 / 125 μm (1 dB / km) | 0 m – 5 km, optical budget 13 dB mit 1300 nm |
Multimode 62,5 / 125 μm (1 dB / km) | 0 m – 5 km, optical budget 13 dB mit 1300 nm |
Operating temperature | -40 °C – +55 ºC |
Other | SNTP for time synchronisation / IGMP v1 and query modus with 256 groups / DHCP client function / TFTP firmware, TFTP backup and recovery / ingress and egress bandwidth control |
Permissible ambient conditions | Permissible ambient conditions |
Port type and amount | 8 Ports in total, max. 4 x 100BASE-FX Ports: ST, SC, E2000 or BIDI-SC, Max. 8 x 10/100BASE-TX Ports: RJ45 |
Power consumption at 24 VDC | 8 Watt, 330 mA |
Power supply | 12 – 60 VDC (redundant) |
Product Description | EL-100-2MA is an 8 port switch that features ring function based on the Media Redundancy Protocol (MRP, IEC 62439) with a recovery time of less than 200 ms and supports ProfiNet. |
Protection class | IP 20 |
Protocols | PROFINET Class B, Netload Class III |
Redundancy | Media redundancy protocol (MRP) according to IEC 62429-2 / rapid spanning tree protocol (RSTP) |
Series | EL-100-2MA |
Signal LEDs / interfaces | Signal LEDs / interfaces |
Singlemode 9 / 125 μm (0,3 dB / km) | 0 m – 30 km, optical budget 16 dB with 1310 nm (other distances on request) |
Standards | IEEE 802.3 10BASE-T / IEEE802.3u, 100BASE-T(X), 1000BASE-T and 1000BASE-SX or LX / IEEE802.3 Flow Control and Backpressure / IEEE 802.1d Spanning Tree / IEEE 802.1w Rapid Spanning Tree / IEEE 802.1p Class of Service / IEEE 802.1Q VLAN-Tag |
Status LEDs | Failure (red)/Ports (green/ yellow)/Power (green)/Ring (green) |
Supply | Supply |
Technical approvals | Technical approvals |
Twisted Pair | 0 m – 100 m (Cat5e) |
Weight | 850 g |
ST4803PDGM
Surge-Trap® Surge Protective Device is a no-fuse surge suppressor. The Surge-Trap is a UL 1449 Third Edition compliant modular style surge protective device that is DIN-rail mountable featuring a fail-safe self-protected design, visual indicator and a small foot print. A remote indicator option provides status to critical control circuit. The Surge-Trap provides advanced overvoltage protection utilizing Mersen's patented TPMOV® technology without additional protection devices. 480 Volts 3P Delta system type without N-G mode, with microswitch .
CUSTOMDIN
DIN rail is a universal mounting option for electrical and industrial control products such as circuit breakers electrical supplies terminal blocks and more. The rail system is used to stabilize a wide variety of devices and products. Ordering pre-cut DIN rail helps increase productivity and decrease jobsite clutter. On-site Flexibility Streamline custom cuts DIN rail to any length so it is ready to use when it arrives on the jobsite. Additionally DIN rail can be easily removed if relocation is necessary. Features of Custom DIN Rail from Streamline - All cut DIN rail from Streamline is galvanized steel made to eliminate rusting. Streamline ensures that all custom DIN rail orders are: De-burred Custom Length Any quantity 1-1000+ Quick turnaround (typically 2 weeks or less from receipt of order) This mechanical support structure is a must for all electrical parts solutions big or small. DIN rail allows for mounting hardware easily and quickly. These durable and versatile rails make the perfect solution for all mounting applications. Save space time and money with these cost-effective mounting solutions. Order your custom cut DIN rail today!
3085
Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included
F62ERLNSNSNM002
OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL
CPP24FMWBLY
The Mini-Com Flush Mount Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.
CESUM3-C15
Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.
UTP6AL1MBU
The TX6A™ 10Gig Cat 6A UTP Patch Cord is a 1-Meter, Blue cord constructed of 24 AWG, unshielded, twisted pair stranded, LSZH (60332-1) cable with high-performance modular plugs. Its MaTriX Tape Technology limits alien crosstalk, ensuring 10 Gb/s transmission. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
Frequently Asked Questions
What is the operating temperature range for the EL100-2MA switch?
The EL100-2MA switch can be used in a wide temperature range of -40 °C to +55 °C.
What are the power supply requirements for the EL100-2MA?
It requires a redundant power supply with an input voltage range from 12 VDC to 60 VDC.
Can the EL100-2MA be mounted on a DIN rail?
Yes, the EL100-2MA is suitable for both DIN rail mounting and wall fastening.
Does the EL100-2MA support VLANs?
Yes, it supports port based VLAN and tagged VLAN IEEE 802.1Q.
What are the dimensions of the EL100-2MA?
The dimensions of the EL100-2MA are 145 x 70 x 130 mm.
What is the weight of the EL100-2MA?
The weight of the EL100-2MA is 850 g.
What is the ring recovery time for the EL100-2MA's ring function?
The ring recovery time for the Media Redundancy Protocol (MRP) is less than 300 ms.
How many ports does the EL100-2MA switch have?
The EL100-2MA is an 8-port switch, available with up to 4 FX-ports and up to 6 TX-ports.
What is the power consumption of the EL100-2MA?
The power consumption is 8 Watts, which is 330 mA at 24 V.
What is the alarm relay output specification for the EL100-2MA?
It has 2 failure relays configurable for 25 VDC (1 A) or 60 VDC (0.3 A) each.
Frequently Asked Questions about EKS Engel
What certifications and standards do EKS Engel products comply with?
EKS Engel products meet multiple international certification standards, including UL (USA/Canada), CE (European Community), UKCA (United Kingdom), EAC (Russia), and C-Tick (Australia & New Zealand). They comply with critical functional safety standards such as EN 61800-5-2, EN ISO 13849-1, EN 62061, and IEC 61508, covering electrical equipment safety, machinery control systems, and environmental protection requirements. Key mechanical and electrical standards include EN 60529 (IP protection), UL 50 (electrical enclosures), and IEC 61800-9-2 (ecodesign for power drive systems).
What industries and applications are EKS Engel products used for?
EKS Engel products are used across multiple critical industrial sectors, including Oil & Gas, Petrochemical, Power Generation, Water Treatment, Manufacturing, Crane & Hoist, HVAC, and Textile industries. Their fiber optic communication systems and electronic solutions are specifically designed for applications like pumps, compressors, conveyors, cranes, hoists, fans, mixers, and industrial machinery that require high-performance data transmission and reliable electronic systems.
What technical support does EKS Engel offer?
EKS Engel offers comprehensive technical support through their dedicated Competence Center, available Monday to Friday from 9:00-16:00 at +49 2762 9313-850. Their technical support includes individual troubleshooting, product and project consulting, on-site support, and FO basic training courses covering fiber optic technologies, network concepts, and specialized technical assistance. For after-hours support, customers can email [email protected].
What are the key features of EKS Engel products?
EKS Engel products are high-performance electronic systems specializing in industrial communication and fiber optic data transmission. Key features include modular devices with advanced technologies like Power over Ethernet (PoE), wide temperature range compatibility, and customized engineering solutions. Their products are designed for critical applications in smart city infrastructure, industrial networks, and IoT solutions, with a strong emphasis on security, reliability, and performance.
What communication protocols do EKS Engel products support?
EKS Engel communication modules support multiple industrial communication protocols, including PROFIBUS DP, PROFINET, EtherNet/IP, CANopen, Modbus RTU, Modbus TCP/IP, DeviceNet, and IEC 61850. Their flexible product range allows single and combination protocol configurations, enabling seamless integration with various industrial automation systems and PLCs.
What environmental ratings do EKS Engel products have?
EKS Engel enclosures feature robust environmental ratings, including IP66/67 protection, NEMA Type 4X certification, and UL/CSA standards for indoor and outdoor applications. Their products are designed to withstand harsh environments, offering protection against windblown dust, rain, splashing water, and external ice formation, with operating temperatures ranging from -40°C to 130°C.
What accessories are available for EKS Engel products?
EKS Engel offers an extensive range of accessories for their industrial enclosures, including mounting plates, DIN rails, depth extension frames, wall fastening lugs, hinges, and flange gaskets. Key accessories include galvanized steel mounting plates in multiple sizes, polycarbonate depth extension frames, 35mm DIN rails, wall mounting lugs, plastic hinges, and specialized gasket sets for different enclosure sizes.
What are the main product lines offered by EKS Engel?
EKS Engel offers multiple core product lines focused on industrial communication and fiber optic technologies, including: Router & Ethernet Extenders, Passive Fiber Optic Systems (FIMP series), SFP Modules, Power Supplies, and Industrial Enclosure Accessories. Their flagship product lines emphasize high-performance electronic systems for data transmission via fiber optics, with a range of modular devices designed for robust industrial environments.
How are EKS Engel products typically installed?
EKS Engel fiber optic communication products are typically installed by trained technical personnel following a comprehensive commissioning process. This involves a detailed work environment inspection, electrical installation verification, internal and external system checks, power-up and setup, and operational testing to ensure compatibility with the customer's specific industrial communication requirements. The company emphasizes precise, efficient installation that meets high-performance standards and ensures system reliability.