
ABB Low Voltage Drives P14494-58 Braking Resistor, 10 OHMS, 1800 WATTS, GCE5 Enclosure, 12W x 16D x 5H in, 18 lbs
Alternate Item Number: 3AUA0000041890
UPC: 662348076484
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 10 OHM resistance for effective energy dissipation
- 1800-watt power rating handles significant braking energy
- GCE5 enclosure provides robust protection
- Compact dimensions: 12" W x 16" D x 5" H
- 18 lbs weight for easy installation

RCAN-01-KIT
CANopen is a higher layer protocol based on the CAN (Control Area Network) serial bus system and the CAL (CAN Application Layer). CANopen assumes that the hardware of the connected device has a CAN transceiver and a CAN controller as specified in ISO 11898.The CANopen Communication Profile, CiA DS 301, includes both cyclic and event driven communication, which makes it possible to reduce the bus load to minimum while still maintaining extremely short reaction times. High communication performance can be achieved at relatively low baud rates, thus reducing EMC problems and cable costs. CANopen device profiles define both direct access to drive parameter and time critical process data communication. The RCAN-01 module fulfills Cia (CAN in Automation) standard DSP 402 (Drives and Motion Control).
RDCO-01C-KIT
The RDCO-01 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 10 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.Frequently Asked Questions
Which ABB drives are compatible with Type CR resistors for single-phase 200-240V applications?
ACS150 and ACS355 drives are compatible with Type CR resistors for single-phase 200-240V applications, for stopping duty only.
What are the resistance and wattage for P14494-58 resistor for ACS150/355-03U-15 A?
For a 15 Hp ACS150/355-03U drive with a 30sec on/180sec off duty cycle, the P14494-58 resistor has 10.0 Ohms and 1800 Watts.
What is the resistance and wattage for P14494-59 resistor for ACS150/355-03U-15 A?
For a 15 Hp ACS150/355-03U drive with a 60sec on/180sec off duty cycle, the P14494-59 resistor has 10.0 Ohms and 3600 Watts.
What are the specifications for P14494-CR-02 resistor for ACS150/355-01U-0.5 Hp?
For a 0.5 Hp ACS150/355-01U drive, the P14494-CR-02 resistor has 200 Ohms and 100 Watts for all listed duty cycles.
What are the specifications for P14494-19 resistor for ACS150/355-01U-0.5 Hp?
For a 0.5 Hp ACS150/355-01U drive, the P14494-19 enclosed resistor has 75 Ohms and 300 Watts for all listed duty cycles.
What is the resistance and wattage for P14494-32 resistor for ACS250-01U-1.5 Hp?
For a 1.5 Hp ACS250-01U drive, the P14494-32 resistor has 50 Ohms and 400 Watts for a 60sec on/180sec off duty cycle.
What is the resistance and wattage for P14494-31 resistor for ACS250-03U-5 Hp?
For a 5 Hp ACS250-03U drive, the P14494-31 resistor has 35 Ohms and 300 Watts for a 3sec on/27sec off duty cycle.
What is the resistance and wattage for P14494-32 resistor for ACS250-03U-5 Hp?
For a 5 Hp ACS250-03U drive, the P14494-32 resistor has 35 Ohms and 820 Watts for a 30sec on/180sec off duty cycle.
What are the specifications for P14494-CR-06 resistor for ACS250-03U-2 Hp?
For a 2 Hp ACS250-03U drive, the P14494-CR-06 resistor has 50 Ohms and 100 Watts for a 3sec on/27sec off duty cycle.
What is the purpose of a braking resistor with VFDs?
Braking resistors dissipate regenerated power to prevent bus voltage from exceeding the drive's rated limit, increasing braking torque for faster deceleration.



