
ABB Low Voltage Drives P14494-44 Braking Resistor, 21 OHMS, 2600 WATTS, GCE8 Enclosure, 19W x 13D x 5H in, 24 lbs
Alternate Item Number: 3AUA0000041093
UPC: 662348076361
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 21 OHM resistance for effective energy dissipation
- 2600 WATTS power rating handles significant braking energy
- GCE8 enclosure for protection and integration
- Compact dimensions: 19" W x 13" D x 5" H
- ABB Low Voltage Drives quality and reliability
Frequently Asked Questions
What are the Ohm and Watt ratings for a 15 HP ACS150/355-03U-46A2-2 drive with a 60sec on/180sec off duty cycle?
For a 15 HP ACS150/355-03U-46A2-2 drive with a 60sec on/180sec off duty cycle, the Resistor Part No. is P14494-59, with 10 Ohms and 3600 Watts.
What is the resistance and wattage for an enclosed resistor package for a 3 HP ACS150/355-01U-09A8-2 drive with a 3sec on/27sec off duty cycle?
For a 3 HP ACS150/355-01U-09A8-2 drive with a 3sec on/27sec off duty cycle, the Resistor Part No. is P14494-31, with 35 Ohms and 300 Watts.
What are the resistance and wattage options for a 1 HP ACS150/355-01U-04A7-2 drive with a 10sec on/50sec off duty cycle?
For a 1 HP ACS150/355-01U-04A7-2 drive with a 10sec on/50sec off duty cycle, the CR Part No. is P14494-CR-04, with 100 Ohms and 100 Watts.
What is the purpose of a braking resistor with variable frequency drives?
Braking resistors are used to dissipate regenerated power, preventing the bus voltage from exceeding the drive's rated limit, especially during faster deceleration or overhauling load conditions.
Which ABB drives are compatible with Type CR resistors for single-phase 200-240V applications?
ACS150 and ACS355 drives are compatible with Type CR resistors for single-phase 200-240V applications, for stopping duty only.
What is the purpose of Braking Modules?
Braking Modules monitor the drive's DC bus and activate external braking resistors to manage regenerated power and improve drive system performance.
What is the function of the thermal switch in GCE and ED enclosures?
A normally closed thermal switch is provided to detect resistor temperature overloads and can be used for protection.
What type of wire should be used when attaching directly to resistors in Type ED enclosures?
If installing without optional terminal connections, always use 200ºC rated silicone or Teflon wire when attaching directly to resistors.
How are Powerohm Type CR resistors designed for efficient cooling?
The nickel-chromium wire element is inside a ceramic fixture within a corrosion-resistant aluminum case. This design allows heat to transfer to the case for efficient cooling.
What are the features of Type ED enclosures?
Type ED enclosures are designed for a large number of resistor coils and have terminal connections up to 400 amps.





