Authorized ABB Distributor (Installation Products)
ABB - Installation Products ULCK 1/0 HS - Copper Heat-Shrink In-Line Compression Splice Kits, conductor size 1/0 Copper. includes Splice and Heat Shrink Tubing

ABB Installation Products ULCK 1/0 HS Copper Heat-Shrink In-Line Compression Splice Kits, conductor size 1/0 Copper. includes…

UPC: 783786755141


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Installation Products ULCK 1/0 HS is a Copper Heat-Shrink In-Line Compression Splice Kit engineered for 1/0 AWG copper conductors in applications ranging from 600V to 35kV. This kit combines a cast-copper two-way splice connector with electro-tin plated finish and a precisely sized heat-shrink tubing sleeve to deliver a permanent, insulated splice solution. The splice connector is designed for heavy-duty use, meeting NEC 250.64(C)(1) requirements for grounding electrode system connections. The heat-shrink tubing, when applied with a heat gun, forms a moisture-, dust-, chemical-, and abrasion-resistant seal that protects the connection from environmental degradation. The in-line configuration simplifies installation in tight spaces or along existing cable runs, eliminating the need for additional covers beyond the clear heat-shrink sleeve. The ULCK 1/0 HS is compatible with standard hydraulic compression tools using hex dies (die code 45) and is suitable for power distribution, industrial automation, telecommunications infrastructure, and other critical electrical systems where secure, long-lasting conductor connections are essential. The kit includes all necessary components for a single splice, ensuring a consistent and reliable installation process.
  • Cast-copper two-way splice connector for 1/0 AWG copper conductors
  • Electro-tin plated finish for corrosion resistance
  • Heat-shrink tubing provides moisture, dust, and chemical resistance
  • Compatible with standard hydraulic compression tools (die code 45)
  • Meets NEC 250.64(C)(1) requirements for grounding electrode connections

Specifications

Conductor Range
1/0 AWG
Connection
Compression
Insulation
Flood Seal Rocket and Cap
Material
Copper
Number Of Conductors
2
Special Features
Prefilled with Oxide Inhibitor and topped with color-coded end caps. Prevents oxidation and keeps out moisture. Solid Center Stops. Easy cable insertion. All splices are marked with installation die codes and compression locations for easy identificaton and installation. Tough Stabilized Nylon Sleeves Resist Installing-tool Pressure and Provide Reliable 600V insulation
Standard
UL E100543
Type
Compression Splice Service Entrance Insulated
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 1/0 AWG - 3/8" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

GL1038

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 1/0 AWG - 3/8" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
Non-Insulated Parallel Splice, Length 0.75 Inch, Outer Diameter 0.571 Inch, Inner Diameter 0.446 Inch, Wire Range 1/0 AWG, 83,700-119,500 kcmil, Copper, Tin Plated

H1/0-PS-C

Non-Insulated Parallel Splice, Length 0.75 Inch, Outer Diameter 0.571 Inch, Inner Diameter 0.446 Inch, Wire Range 1/0 AWG, 83,700-119,500 kcmil, Copper, Tin Plated
Panduit BS18-C Non-Insulated Butt Splice

BS18-C

Panduit BS18-C Non-Insulated Butt Splice
Copper Flood-Seal In-Line Compression Splice Kits, conductor size 350 Copper, includes Splice, Insulating Cap with Liner and Rocket, Silicone Grease.

ULCK 350

Copper Flood-Seal In-Line Compression Splice Kits, conductor size 350 Copper, includes Splice, Insulating Cap with Liner and Rocket, Silicone Grease.
Copper Flood-Seal In-Line Compression Splice Kits, conductor size 6 Copper, includes Splice, Insulating Cap and Rocket, Silicone Grease and Instruction Sheet

ULCK 6

Copper Flood-Seal In-Line Compression Splice Kits, conductor size 6 Copper, includes Splice, Insulating Cap and Rocket, Silicone Grease and Instruction Sheet
Aluminum Flood-Seal In-Line Compression Splice Kits, conductor size 1/0 AL9CU, includes Splice, Insulating Cap and Rocket, Silicone Grease and Instruction Sheet

ULSK 1/0

Aluminum Flood-Seal In-Line Compression Splice Kits, conductor size 1/0 AL9CU, includes Splice, Insulating Cap and Rocket, Silicone Grease and Instruction Sheet
Aluminum Flood-Seal In-Line Compression Splice Kits, conductor size 2 AL9CU, includes Splice, Insulating Cap and Rocket, Silicone Grease and Instruction Sheet

ULSK 2

Aluminum Flood-Seal In-Line Compression Splice Kits, conductor size 2 AL9CU, includes Splice, Insulating Cap and Rocket, Silicone Grease and Instruction Sheet
Aluminum Flood-Seal In-Line Compression Splice Kits, conductor size 2/0 AL-CU, includes Splice, Insulating Cap with Liner and Rocket, Silicone Grease

ULSK 2/0

Aluminum Flood-Seal In-Line Compression Splice Kits, conductor size 2/0 AL-CU, includes Splice, Insulating Cap with Liner and Rocket, Silicone Grease

How to Install a Heat-Shrink Compression Splice Kit

This guide provides step-by-step instructions for installing a heat-shrink compression splice kit. Always disconnect power before installation. Wear safety glasses and protective gloves, and ensure installation is performed by a qualified electrician following all national and local electrical codes.

Estimated time: 30m

Tools needed:

Torches, Wire brush, Crimping tool

Supplies needed:

Heat-shrink tubing, Compression connector, Oxide inhibitor (for aluminum conductors)

  1. Prepare Cable Ends

    WARNING: Disconnect all power before proceeding to prevent risk of shock. Strip both ends of the cable insulation 1/2 the length of the connector plus 1/4 inch. Clean the stripped cable insulation. For aluminum conductors only, wire brush the conductor strands, then coat them with oxide inhibitor and wire brush it into the strands.

  2. Position Heat-Shrink Tubing

    Carefully place the heat-shrink tubing over one of the clean cable ends. Ensure the tubing is protected from possible damage by the conductor as it is slid over the cable end.

  3. Install and Crimp Connector

    Install the compression connector onto the prepared cable ends, ensuring proper seating. Crimp the connector using the recommended die size marked on the connector. After crimping, clean and deburr the connector if required to ensure a smooth surface.

  4. Shrink the Tubing

    CAUTION: When using gas torches, follow manufacturer’s safety precautions and check all accessory equipment for leaks prior to use. Center the heat-shrink tubing over the splice. Apply the outer 3 to 4 inch tip of the flame to the heat-shrinkable material with a rapid brushing motion. Keep the flame moving to avoid scorching. Begin shrinking at the center of the tube, working the flame uniformly around all sides. Once the center portion shrinks, work the torch towards one end, then to the opposite end until the tubing is completely shrunk.

  5. Inspect and Cool the Splice

    Inspect the complete splice for proper installation. A properly installed tube will be smooth and conform tightly to the connection, with adhesive visible at both ends. Reheat any flat spots or wrinkles to ensure a complete seal. Allow the installation to cool completely before touching, moving, or placing it into service.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.