Authorized ABB Distributor (Installation Products)
ABB - Installation Products UH 11 L - Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 kcmil Connector, Length 6-1/2 inch, screws per side 2, Insulating Cap/Rocket, Grease, (4) Screws Tapped 11/16-16 UNS-2B and Instruction Sheet.

ABB Installation Products UH 11 L Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 kcmil…

UPC: 783786754830


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB UH 11 L is a robust mechanical splice kit designed for two-wire applications, featuring an aluminum Flood-Seal construction for enhanced durability and protection. This kit is engineered to accommodate a conductor range from 6 to 350 kcmil, making it versatile for various industrial electrical connections. The splice connector measures 6-1/2 inches in length and utilizes two screws per side for secure termination. Included in the kit are an insulating cap/rocket, specialized grease for optimal conductivity and corrosion resistance, and four screws tapped 11/16-16 UNS-2B, ensuring a reliable and long-lasting connection. The UH 11 L is part of ABB's Installation Products line, known for its quality and performance in demanding environments. The kit also comes with an instruction sheet to guide users through the installation process. This mechanical splice is suitable for applications requiring secure and sealed wire connections, protecting against environmental factors. Its design prioritizes ease of use while maintaining high standards of electrical integrity. The aluminum construction offers excellent conductivity and resistance to corrosion, crucial for industrial settings. The specific tapping of the screws (11/16-16 UNS-2B) indicates a precise fit for secure mechanical engagement.
  • Aluminum Flood-Seal construction for enhanced protection
  • Accommodates conductor range from 6 to 350 kcmil
  • 6-1/2 inch connector length with 2 screws per side
  • Includes insulating cap/rocket, grease, and 4 tapped screws (11/16-16 UNS-2B)
  • Designed for reliable two-wire mechanical splicing

Specifications

Color
Black
Connection
Mechanical
Environmental Conditions
Fully Insulated, Watertight
Insulation
EPDM Rubber
Material
Aluminum
Special Features
Range Taking - No Compression Tools or Dies Required. 6-1/2 inch Long
Type
Mechanical Splice Two-Wire Kit
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
0.7500 L
Package Weight (Metric)
0.3400 kg
Multi Tap Connector, Single Sided, Black Insulation, 2 Port, #4-#14 AWG STR, #10-#14 AWG SOL

BLKPSB4-2S-12

Multi Tap Connector, Single Sided, Black Insulation, 2 Port, #4-#14 AWG STR, #10-#14 AWG SOL
Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 kcmil CU9AL Connector, Length 4-1/16 inch, screws per side 2, includes Cap with liner and Insulating Rocket.

UH 11

Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 kcmil CU9AL Connector, Length 4-1/16 inch, screws per side 2, includes Cap with liner and Insulating Rocket.
2 Port Aluminum Dual Rated Transformer Stud Connector 350 MCM -6 AWG with 5/8" Stud Aluminum dual rated transformer stud connectors are versatile and reusable set screw connectors made from 6061T-6 aluminum alloy for superior electrical and mechanical performance. Clear plated for low contact resistance- stud is tin plated copper which provides low contact resistance for connection to transformer. For use with copper and aluminum conductors. Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.

TS350-2

2 Port Aluminum Dual Rated Transformer Stud Connector 350 MCM -6 AWG with 5/8" Stud Aluminum dual rated transformer stud connectors are versatile and reusable set screw connectors made from 6061T-6 aluminum alloy for superior electrical and mechanical performance. Clear plated for low contact resistance- stud is tin plated copper which provides low contact resistance for connection to transformer. For use with copper and aluminum conductors. Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.
AF26-38 STAR DELTA PUSHIN CONNECT SET

BEY38-4KF

AF26-38 STAR DELTA PUSHIN CONNECT SET
Rubber Insulated Street and Highway Lighting Mechanical Connectors, Conductor Range Main 1/0 maximum, Tap 12-8, with Hex Socket Screws

RB 210-8 SL

Rubber Insulated Street and Highway Lighting Mechanical Connectors, Conductor Range Main 1/0 maximum, Tap 12-8, with Hex Socket Screws
Rubber Insulated Street and Highway Lighting Mechanical Connectors, Conductor Range main 1/0 max, tap 12-8, With locking 1/8 inch Slotted Screws

RB 210-8 SS

Rubber Insulated Street and Highway Lighting Mechanical Connectors, Conductor Range main 1/0 max, tap 12-8, With locking 1/8 inch Slotted Screws
RB Series Rubber Insulated Street and Highway Lighting Mechanical Connectors, Conductor range main 2/0 -14max, tap 14-6. Aluminum

RB 6240 SL

RB Series Rubber Insulated Street and Highway Lighting Mechanical Connectors, Conductor range main 2/0 -14max, tap 14-6. Aluminum
SLV Series Clear PVC Encapsulated Insulated Street and Highway Lighting Mechanical Connectors, Conductor range 12-2

SLV 42-212

SLV Series Clear PVC Encapsulated Insulated Street and Highway Lighting Mechanical Connectors, Conductor range 12-2

Frequently Asked Questions

What conductor sizes does the UH 11 L splice kit support?

The ABB UH 11 L mechanical splice kit supports a conductor range from 6 to 350 kcmil.

What is included in the UH 11 L splice kit?

The kit includes the aluminum Flood-Seal splice connector, an insulating cap/rocket, grease, four screws tapped 11/16-16 UNS-2B, and an instruction sheet.

What is the length of the UH 11 L splice connector?

The UH 11 L splice connector has a length of 6-1/2 inches.

How many screws are used per side on the UH 11 L splice?

The UH 11 L splice utilizes two screws per side for secure termination.

What type of screws are included with the UH 11 L kit?

The kit includes four screws tapped 11/16-16 UNS-2B.

How to Install the Flood-Seal Insulated Mechanical Splice UH 11 L

This guide provides step-by-step instructions for installing the 'Flood-Seal' Insulated Mechanical Splice (Cat. No. UH 11 L), covering cable preparation, connector assembly, and sealing. Installation must be performed by trained installers following all electrical codes and safety rules.

Estimated time: 30m

Tools needed:

Wire brush, Torque wrench, Cable cutting tool

Supplies needed:

Flood-Seal Insulated Mechanical Splice (UH 11 L), Electrical cable, Silicone grease, Anti-oxidant compound

  1. Select Correct Cut-Off Ring

    Identify and select the appropriate cut-off ring on the rocket sleeve that corresponds to the gauge of the cable being used.

  2. Prepare Cable Conductors

    Strip 1-7/8 inches of insulation from the ends of the cables to expose the conductors. Thoroughly wire brush the bare conductors with an anti-oxidant compound to remove any oxides.

  3. Trim Rocket Sleeve

    Carefully cut off the rocket sleeve at the tip of the arrow, ensuring that the correct cable size marking remains visible on the opened rocket portion.

  4. Lubricate and Position Rocket

    Apply silicone grease to the prepared cable end. Slide the trimmed rocket sleeve over the lubricated cable end.

  5. Secure Conductors

    Insert the prepared conductors into the outlet barrels of the mechanical connector. Using a torque wrench, tighten the double set screws to a torque of 240 inch-lbs to ensure low contact resistance.

  6. Seal the Splice

    Apply silicone to the open edge of the rocket sleeve. Slide the two halves of the rocket sleeve together firmly to create a "Flood-Seal" around the splice.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.