Authorized ABB Distributor (Installation Products)
ABB - Installation Products SHC 500-5 - Aluminum Flood-Seal Mechanical Connectors-Mechanical 500 kcmil connectors, dual rated, PVC Insulated, cable range feeder outlet S/L 2-500, outlets 5, length 10-5/8 in

ABB Installation Products SHC 500-5 Aluminum Flood-Seal Mechanical Connectors-Mechanical 500 kcmil connectors, dual rated…

UPC: 783786079988

Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 12

Multiplier: 12

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB SHC 500-5 is a 500 kcmil aluminum mechanical connector designed for secure, insulated cable connections in feeder applications. Dual-rated for compatibility with multiple cable sizes, this connector features five outlets with a cable range of S/L 2-500, ensuring flexibility for feeder outlet configurations. The PVC insulation provides dielectric protection and mechanical durability, meeting standard requirements for industrial and commercial wiring systems. Mechanical connectors like the SHC 500-5 eliminate the need for soldering or crimping, reducing installation time while maintaining reliable performance. The aluminum construction offers lightweight strength, ideal for high-current feeder circuits where thermal stability and corrosion resistance are critical. With a length of 10-5/8 inches, this connector fits standard junction boxes and enclosures without modification. Commonly used in power distribution panels, motor control centers, and industrial feeder circuits, the SHC 500-5 supports applications requiring multiple cable terminations from a single feeder source. Its design ensures proper strain relief and electrical continuity, reducing the risk of loose connections or insulation damage over time. For installations where space and efficiency matter, this connector provides a durable, code-compliant solution.
  • 500 kcmil aluminum mechanical connector for feeder outlets
  • Dual-rated for cable range S/L 2-500 with 5 outlets
  • PVC insulation for dielectric protection and mechanical durability
  • 10-5/8 in length for standard enclosure compatibility
  • Eliminates soldering/crimping for faster, reliable installations

Specifications

Application
Flood Seal Mechanical 500 kcmil Connector
Color
Black
Conductor Range
#2 to 500 kcmil
Connection
Mechanical
Insulation
yes
Material
Aluminum Connector
Number Of Conductors
5
Size
length 10-5/8 inch
Special Features
Aluminum-alloy connector construction for High Strength and High Conductivity, Dual-rated for use with Copper or Aluminum Cables. All Connectors are 100 percent Hi-Pot tested at 4000 volts for 60 seconds
Standard
ANSI C119.1 and C119.4
Type
Flood Seal Mechanical Connector
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
4.0200 L
Package Weight (Metric)
1.8240 kg
Aluminum Flood-Seal Twin-Screw Mechanical Connectors for 500 kcmil series - wire range 2-500 kcmil, length 3-7/8 inch, height 4-3/4 inch, outlets 2 with 2-Holes each. Black PVC Coating.

UH 500-2 R

Aluminum Flood-Seal Twin-Screw Mechanical Connectors for 500 kcmil series - wire range 2-500 kcmil, length 3-7/8 inch, height 4-3/4 inch, outlets 2 with 2-Holes each. Black PVC Coating.
Tin Plated Copper Flood Seal Connector with EPDM Rubber Coating on main body, 12-1/4 inch High x 2-1/4 inch thick x 21-3/4 inch Long. Total Outlets 12, 6 on each side.

FXL 66-175 CU

Tin Plated Copper Flood Seal Connector with EPDM Rubber Coating on main body, 12-1/4 inch High x 2-1/4 inch thick x 21-3/4 inch Long. Total Outlets 12, 6 on each side.
Ring Bus Connector 8 Tap Positions, Aluminum with PVC coating, Main 1000 MCM, (8) Taps 500 MCM, 20 inches wide without counting Rockets. Dies 161 292 302 319 1 3/4, Contains Oxide Inhibiting Compound, Main 954-1000 MCM AL-CU. Tap 795 26/7 30/19 954 45/7 ACSR.

RBC 1000-8500

Ring Bus Connector 8 Tap Positions, Aluminum with PVC coating, Main 1000 MCM, (8) Taps 500 MCM, 20 inches wide without counting Rockets. Dies 161 292 302 319 1 3/4, Contains Oxide Inhibiting Compound, Main 954-1000 MCM AL-CU. Tap 795 26/7 30/19 954 45/7 ACSR.
SweetHeart Aluminum, Black PVC Insulated, Set Screw Type Bus with Rubber Sealing Covers, #2 - 500 kcmil, #2-#14 Streetlight, Four Towers, 8.25 inch. Includes Screws, Rockets and Grease

SHC 500-4 SL

SweetHeart Aluminum, Black PVC Insulated, Set Screw Type Bus with Rubber Sealing Covers, #2 - 500 kcmil, #2-#14 Streetlight, Four Towers, 8.25 inch. Includes Screws, Rockets and Grease
Multi Seal, Copper Insulated Bus Connector, #10 - 500 kcmil, Six Conductor, 9 inch long, Santoprene Coated

RAB 65 CU

Multi Seal, Copper Insulated Bus Connector, #10 - 500 kcmil, Six Conductor, 9 inch long, Santoprene Coated
Aluminum Flood-Seal Multi-Port EPDM Rubber Insulated Bus Connector, #2-1000 kcmil, Aluminum and Copper, 12 Conductor, includes Screws, Rockets and Caps. 21.432 inch

RXM 66 C

Aluminum Flood-Seal Multi-Port EPDM Rubber Insulated Bus Connector, #2-1000 kcmil, Aluminum and Copper, 12 Conductor, includes Screws, Rockets and Caps. 21.432 inch
Aluminum, Black PVC Dipped, 8 Outlets with (2) .312 inch Diameter holes on each outlet. Dimensions 16.125 inch long x 4.172 inch High x 1.250 inch wide. Thickness of Pad .437 inch. PVC Coating Thickness .125 inch.

FSQ 8-125

Aluminum, Black PVC Dipped, 8 Outlets with (2) .312 inch Diameter holes on each outlet. Dimensions 16.125 inch long x 4.172 inch High x 1.250 inch wide. Thickness of Pad .437 inch. PVC Coating Thickness .125 inch.
Multi-Port Transformer Connector - Bus 5 positions/towers with two 1/2 inch holes per tower, 1000 MCM, 11.750 inches x 12.531 inches. Welded 45 Degree Aluminum Pad with Six 0.625 inch Diameter Holes (Spacing 1.625 inch side to side and 1.750 inch front to back) on 5 inch x 3.312 inch x .750 inch Thick Pad. Coated with Black PVC. Includes 10 Screws for Towers. Left Hand Pad.

FS 5-175-6 BF 45 L

Multi-Port Transformer Connector - Bus 5 positions/towers with two 1/2 inch holes per tower, 1000 MCM, 11.750 inches x 12.531 inches. Welded 45 Degree Aluminum Pad with Six 0.625 inch Diameter Holes (Spacing 1.625 inch side to side and 1.750 inch front to back) on 5 inch x 3.312 inch x .750 inch Thick Pad. Coated with Black PVC. Includes 10 Screws for Towers. Left Hand Pad.

How to Install Sweetheart SHC 500 Connectors

This guide provides step-by-step instructions for the proper installation of Sweetheart SHC 500 Connectors, including cable preparation, assembly, and torque specifications. Installation must be performed by trained installers in accordance with all applicable local, state, and national electrical codes, installation standards, and safety rules to prevent electric shock.

Estimated time: 30m

Tools needed:

Wire strippers, Cutting tool, Wire brush, Torque wrench

Supplies needed:

Sweetheart SHC 500 Connector, Electrical cable, Silicone grease, Correct cut-off ring

  1. Prepare the Connector

    Remove the insulating sleeve from the connector outlet. Select the correct cut-off ring that corresponds to the specific cable size being used.

  2. Cut the Rocket Sleeve

    Using the selected cut-off ring as a guide, cut off the rocket sleeve at the tip of the arrow. Ensure the correct cable size is visible on the opened rocket after cutting. Refer to the connector markings for specific cut points based on wire size (e.g., #8 to #4, #2 to 2/0, 3/0 to 250, 300 to 350, 350 to 500).

  3. Strip Cable Insulation

    Strip approximately 2-1/4 inches of insulation from the end of the cable, exposing the conductor.

  4. Bevel Insulation Edge (Optional)

    Optionally, bevel the cut edge of the cable insulation. While not strictly necessary, this is a preferred practice for a cleaner finish.

  5. Clean Conductor Surface

    Thoroughly wire brush the bare conductor to break up and remove any oxides from its surface, ensuring good electrical contact.

  6. Lubricate and Position Rocket

    Wipe the cable clean. Apply silicone grease to the prepared cable end. Slide the cut rocket over the prepared cable.

  7. Insert Conductor into Outlet

    Insert the prepared conductor into the connector outlet. Ensure that a maximum of 1/8 inch of bare conductor is showing after insertion.

  8. Position Rocket Sleeve

    Slide the rocket sleeve over the outlet and onto the PVC shoulder. Continue sliding until the rocket butts firmly against the connector bar.

  9. Tighten Set Screws

    Tighten the set screws down onto the conductors to the recommended torque specifications: For #6 to #4 wire, apply 120 in.-lbs. (10 ft.-lbs.). For #2 to 350 MCM wire, apply 240 in.-lbs. (20 ft.-lbs.). For 400 to 500 MCM wire, apply 360 in.-lbs. (30 ft.-lbs.).

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.