Authorized ABB Distributor (Installation Products)
ABB - Installation Products SA 2-48 L - Aluminum Compression One-Hole Lug, #2 and #1 Stranded - Compressed. Installing Die 243. Length 3-9/16 inch. Pad 7/8 inch wide x 1-21/64 inch long x 13/64 inch thick. (1) 17/32 inch Diameter hole. Barrel 1-11/16 inch. Dual Rated for Aluminum and Copper Conductors

ABB Installation Products SA 2-48 L Aluminum Compression One-Hole Lug, #2 and #1 Stranded - Compressed. Installing Die 243.…

UPC: 783786749799


Documents & Media
Manufacturer Product Website

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB SA 2-48 L aluminum compression one-hole lug is designed for secure, long-lasting connections in electrical installations. This lug accommodates #2 and #1 stranded conductors, providing a reliable termination point for both aluminum and copper wires—dual-rated to eliminate compatibility concerns. The barrel measures 1-11/16 inches, ensuring ample conductor coverage, while the 17/32-inch diameter hole allows for easy installation with standard hardware. With a pad size of 7/8 inch wide by 1-21/64 inch long and 13/64 inch thick, this lug fits securely onto bus bars or other connection points. The compression design, installed using Die 243, delivers a gas-tight seal that resists vibration and corrosion, critical for outdoor or industrial environments. Commonly used in power distribution panels, switchgear, and renewable energy systems, this lug meets the demands of high-current applications where conductor integrity is essential. The 3-9/16-inch length provides stability during compression, reducing the risk of deformation or poor contact. Trust ABB’s Installation Products for dependable electrical connections in commercial, industrial, and utility installations.
  • Dual-rated for aluminum and copper conductors
  • Accommodates #2 and #1 stranded wire
  • 17/32" diameter hole for standard hardware
  • Barrel length: 1-11/16 inches for secure conductor grip
  • Installed using Die 243 for gas-tight compression

Specifications

Application
Designed for General Applications and for Installation on 125 Series Insulated Buses
Connection
Compression
Connection Type
Compression
Finish
Uncoated
Housing Material
Aluminum
Housing Material
Aluminium
Insulation
None
Material
Aluminum
Series
SA
Size
Length 1-5/16 inch
Size
Length 3-9/16 inch, Pad 7/8 inch wide x 1-21/64 inch long x 13/64 inch thick, Barrel 1-11/16 inch
Special Features
Dual-Rated for use with Aluminum and Copper Conductors. Made from Aluminum for High Strength and High Conductivity. Connector Bores coated with Oxide Inhibitor to Prevent Oxidation. Marked with conductor sizes and die references
Standard
ANSI C119.4
Type
Compression Lug One Hole
Wire Size
#1 to #2 STR AWG , #1 COMPR/COMPT AWG , 1/0 SOL AWG , #2 ACSR AWG
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
Tin Plated Aluminum Two-Hole NEMA Lugs - straight lug, Wire Range 1/0 Solid, 2 ACSR, 2-1 Stranded, 1 Compressed-Compact. installing dies TU, 52, BG, 243, 5/8, CSA22, 620. Length 5-3/16 inch. Pad 1 inch wide x 3-1/8 inch long x 5/16 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch center. Barrel 1-1/2 inch long. Dual Rated for Aluminum and Copper Conductors

SA 2 NTN

Tin Plated Aluminum Two-Hole NEMA Lugs - straight lug, Wire Range 1/0 Solid, 2 ACSR, 2-1 Stranded, 1 Compressed-Compact. installing dies TU, 52, BG, 243, 5/8, CSA22, 620. Length 5-3/16 inch. Pad 1 inch wide x 3-1/8 inch long x 5/16 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch center. Barrel 1-1/2 inch long. Dual Rated for Aluminum and Copper Conductors
The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLMD350-6

The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Aluminum Compression One-Hole NEMA Lug. 1/0 Solid, 2 ACSR, 2-1 Stranded, 1 Compressed-Compact. Installing Dies TU, 52, BG, 243, 5/8, CSA 22, 620. Lug Length 3-1/8 inch. Pad 7/8 inch wide x 1-5/16 inch long x 13/64 inch thick. (1) 17/32 inch Diameter hole. Barrel 1-19/64 inch with Pre-Crimped 18 inch #2 AWG wire. Dual Rated for Aluminum and Copper Conductors

SA 2-48 W/218

Aluminum Compression One-Hole NEMA Lug. 1/0 Solid, 2 ACSR, 2-1 Stranded, 1 Compressed-Compact. Installing Dies TU, 52, BG, 243, 5/8, CSA 22, 620. Lug Length 3-1/8 inch. Pad 7/8 inch wide x 1-5/16 inch long x 13/64 inch thick. (1) 17/32 inch Diameter hole. Barrel 1-19/64 inch with Pre-Crimped 18 inch #2 AWG wire. Dual Rated for Aluminum and Copper Conductors
Aluminum Compression One-Hole NEMA Lug, Aluminum or Copper Conductors. - Wire Range 3/0 Stranded - ACSR AL-CU, 4/0 Compressed - Compact. Installing Dies TX, 76, 249, 840, 845, CSA24, 11A. Length 3-3/8 inch. Pad 1-5/32 inch wide x 1-5/16 inch x 23/64 inch thick. (1) 13/32 inch Diameter Hole. Barrel 1-19/64 inch. Oxide Inhibitor. Black Cap. For use with 3/8 inch bolts.

SA 3/0-38

Aluminum Compression One-Hole NEMA Lug, Aluminum or Copper Conductors. - Wire Range 3/0 Stranded - ACSR AL-CU, 4/0 Compressed - Compact. Installing Dies TX, 76, 249, 840, 845, CSA24, 11A. Length 3-3/8 inch. Pad 1-5/32 inch wide x 1-5/16 inch x 23/64 inch thick. (1) 13/32 inch Diameter Hole. Barrel 1-19/64 inch. Oxide Inhibitor. Black Cap. For use with 3/8 inch bolts.
Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole Pad 1-3/4 inch Center to Center Spacing, 500 kcmil AL-CU, 9/16 inch Diameter Bolt Hole. 6-5/16 inch Overall Length, Pad Width 1-3/4 inch.

2081-500

Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole Pad 1-3/4 inch Center to Center Spacing, 500 kcmil AL-CU, 9/16 inch Diameter Bolt Hole. 6-5/16 inch Overall Length, Pad Width 1-3/4 inch.
Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole Pad 1-3/4 inch Center to Center Spacing, 700-750 kcmil AL-CU, 9/16 inch Diameter Bolt Hole. 7-1/16 inch Overall Length, Pad Width 1-3/4 inch.

2081-750

Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole Pad 1-3/4 inch Center to Center Spacing, 700-750 kcmil AL-CU, 9/16 inch Diameter Bolt Hole. 7-1/16 inch Overall Length, Pad Width 1-3/4 inch.
Tin-Plated Aluminum Compression One-Hole NEMA Lug, Aluminum or Copper Conductors. - Wire Range 3/0 Stranded - ACSR AL-CU, 4/0 Compressed - Compact. Installing Dies TX, 76, 249, 840, 845, CSA24, 11A. Length 3-3/8 inch. Pad 1-5/32 inch wide x 1-5/16 inch x 23/64 inch thick. (1) 9/16 inch Diameter Hole. Barrel 1-19/64 inch. Oxide Inhibitor. Black Cap. For use with 1/2 inch bolts.

SA 3/0-48 TN

Tin-Plated Aluminum Compression One-Hole NEMA Lug, Aluminum or Copper Conductors. - Wire Range 3/0 Stranded - ACSR AL-CU, 4/0 Compressed - Compact. Installing Dies TX, 76, 249, 840, 845, CSA24, 11A. Length 3-3/8 inch. Pad 1-5/32 inch wide x 1-5/16 inch x 23/64 inch thick. (1) 9/16 inch Diameter Hole. Barrel 1-19/64 inch. Oxide Inhibitor. Black Cap. For use with 1/2 inch bolts.
Tin-Plated Aluminum Compression One-Hole NEMA Lug. Wire Range #2 Standed - Compressed, #2 and #1 Compact, #1 Solid. Installing Dies TU, 52, BG, 243, 5/8, CSA 22. Length 3-1/8 inch. Pad 55/64 inch wide x 1-5/16 inch long x 13/64 inch thick. (1) 17/32 inch hole. Barrel 1-19/64 inch. Oxide Inhibitor. Red Cap. For use with 1/2 inch bolt. Dual Rated for Aluminum and Copper Conductors

SA 3-48 TN

Tin-Plated Aluminum Compression One-Hole NEMA Lug. Wire Range #2 Standed - Compressed, #2 and #1 Compact, #1 Solid. Installing Dies TU, 52, BG, 243, 5/8, CSA 22. Length 3-1/8 inch. Pad 55/64 inch wide x 1-5/16 inch long x 13/64 inch thick. (1) 17/32 inch hole. Barrel 1-19/64 inch. Oxide Inhibitor. Red Cap. For use with 1/2 inch bolt. Dual Rated for Aluminum and Copper Conductors

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.