ABB Installation Products K675VS-L2 900 Amp, 15/25kV, Deadbreak, 2-Way VS Kit, Does not include cable adapters or…
UPC: 783786519439
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 900 Amp current rating for high-capacity feeders and substations
- 15/25 kV voltage rating for medium-voltage systems
- 2-way deadbreak design for two separate cable circuit terminations
- Fully shielded and isolated energized parts when disconnected
- Excludes cable adapters and compression lugs (order separately)
Specifications
Application | 15/25 kV, 900 Amps |
Connection | Compression |
Connection Type | Deadbreak |
Current Rating | 900 A |
Material | Copper |
Material | Composite/Insulation |
Poles | 2-Way |
Series | K675VS |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | 2-Way Vault Stretcher Kit |
Voltage Rating | 15/25 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 10.0000 L |
Package Weight (Metric) | 4.5360 kg |
K650BIP-720LOT
15/25kV 600 Series Deadbreak Insulated Plug (with Cap). Material Epoxy, Length 4.5 inch, Widest Diameter 3 inch. - Lot of 720
K656-CBW
15/25kV, 600 Amp Base Aluminum, includes test point, Combo T Bushing Well with Stud, Cable Adapter and Lug Kit.K675J35
900 Amp, 15/25kV, Deadbreak, 3-Point Junction, Rubber Junction, Stainless Steel U Straps and back plate.
K650ETPS
600 Amp, 25kV, 600 Series Loadbreak Elbow Tap Plug, use 600ATM assembly tool. Includes 28 kV 600 Amp StudFrequently Asked Questions
How do I order the K675VSL2 2-Way Vault Stretcher?
To order the 15/25kV, 900A 2-Way Vault Stretcher, specify K675VSL2.
What is required for the K675VSL2's 900 Amp rating?
The 900 Amp rating requires copper current-carrying connector components and copper conductor cable.
What is the maximum operating voltage for the K675VSL2?
The maximum phase-to-ground operating voltage is 16.2kV, and the maximum phase-to-phase voltage is 28kV.
What is the continuous current rating of the K675VSL2?
The continuous current rating for the K675VSL2 is 900 Amps.
What industry standards does the K675VSL2 meet?
The K675VSL2 meets ANSI/IEEE Standard 386, Latest Revision.
What is the impulse withstand rating for the K675VSL2?
The impulse withstand rating (BIL) is 140kV, based on a 1.2 x 50 microsecond wave.
What items are included in the K675VSL2 vault stretcher kit?
The kit includes one K675VSL2 housing, two K675BIP insulating plugs with caps, six tubes of lubricant 82-08, one 670VSA stud, and one IS-0356 installation instruction.
What tool is recommended for installing the K675CP connecting plug?
The 600SW spanner wrench is recommended for the installation of the K675CP connecting plug.
Are cable adapters or compression lugs included with the K675VSL2 kit?
No, L-Kits and VS-Kits, including the K675VSL2, do not include cable adapters or compression lugs. These items must be ordered separately.
How is the K675VSL2 connected or disconnected?
It can be easily connected or disconnected using standard hand tools and equipment, but only in a de-energized state.
How to Install the Elastimold 655VS/K655VS Deadbreak Vault Stretcher
This guide provides step-by-step instructions for the safe and proper installation of the Elastimold 655VS/K655VS Deadbreak Vault Stretcher, including cable preparation, lug crimping, and final assembly for high voltage systems.
Estimated time: 1h 30m
Tools needed:
Cable cutting tool, Wire brush, Crimping tool, Torque wrench, Cleaning supplies, 5/8 inch bolt and nut
Supplies needed:
Elastimold 655VS/K655VS Vault Stretcher kit, Grounding wire (min. 14 AWG copper), Suitable grounding connectors, Lubricant
- Prepare Cables for Installation
DANGER: Ensure all apparatus is de-energized before starting. Inspect all parts for damage and compatibility. For concentric neutral cable, overlap both cables, cut to 14” (355mm) from the joint centerline, and bend back the neutral wires. Clean the outer surface of the cable for 24” (610mm) or up to the bent neutrals. Remove the outer jacket (if applicable) and prepare the cable insulation to 9-3/4” (248mm), semi-con shield to 10-3/4” (273mm), and tape marker to 12-3/4” (324mm) from the cable end.
- Install Cable Adapters and Trim Conductors
Bevel the end of the cable insulation at a 45-degree angle, approximately 1/4” (6mm) back. Thoroughly clean and lubricate the cable insulation, working towards the semi-con shield. Install the cable adapter, small end first, until it is flush with the edge of the tape marker. Remove any protruding cable insulation, ensuring it is even with the end of the cable adapter. Verify the exposed conductor length is between 4-3/8” and 4-11/16” (111mm-119mm).
- Crimp Compression Lugs onto Conductors
For aluminum conductors, wire brush the conductor and immediately fully insert it into the compression lug. For copper, fully insert the conductor. Measure the 'Check Dimension' (must be less than 6-1/2”). Align the flat portions of the compression connector using a 5/8” bolt. Make the first crimp 3-1/2” from the open end of the fitting at the indicated mark. Rotate each successive crimp 180 degrees to prevent bowing. Carefully wipe excess inhibitor and remove any sharp flash. Verify the connector end is 6-1/2” to 7-1/4” (165mm-184mm).
- Assemble Vault Stretcher Body with Cables
Lubricate the inside of the vault stretcher body and the outside of the cable adapter. Using a rotating motion, slip the body onto the cable adapter, ensuring the compression lug aligns and seats fully. For the opposite cable, push the vault stretcher and compression lug sideways until the lug enters the open end of the body. Slowly push both units for final alignment, verifying the lubricated adapter slides into position. Check the compression lug location through the viewing hole. Ensure both cable adapters are flush with tape markers, then remove the tape markers.
- Connect Mating Parts and Ground the System
DANGER: DO NOT connect or disconnect mating products while energized. DO NOT energize while disconnected. Remove protective caps. Hand tighten the special 650VSA stud into one mating part. Clean and lubricate the vault stretcher and mating part. Clean and lubricate the mating part for the opposite end, then insert it into the elbow, engage threads, and hand tighten. Torque mating parts according to their specific instructions. If using an insulating plug, clean, lubricate, and snap the voltage detection cap into place. Ground concentric neutral cables by inserting a minimum No. 14 AWG copper wire through each grounding eye, forming a loop, and connecting to ground with suitable connectors.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.