Contact for Pricing
Overview
- 600A continuous current rating with 25kA symmetrical momentary rating
- Compatible with 15kV and 25kV voltage classes per ANSI/IEEE Standard 386
- EPDM rubber insulation with copper construction for durability and conductivity
- Removable protective cap with capacitive test point for safe voltage verification
- Hot-stick workable design for enhanced safety during operations
Specifications
Amperage Rating | 600 A |
Application | 15/25 kV, 600 Amps |
Conductor Material | Copper |
Connection | Threaded |
Current Rating | 600 A |
Insulation | EPDM Rubber |
Length | 10.56 in |
Material | Copper with EPDM Rubber |
Series | 600 Series |
Special Features | 5/8-11 Threaded Stud |
Standard | ANSI/IEEE Standard 386 |
Type | Grounding Device |
Voltage Rating | 15/25 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
GG40250-2030
E-Z-Ground Ground Grid Copper Compression Connector, Cable Range 4/0 or 250 kcmil, Ground Rod 1/2 and 5/8 Inch, Direct Burial
80024
Grounding pigtail with an insulated lead and a GSH grounding screw on one end. It is designed to make grounding an electrical circuit fast and easy. The lead is 9 inches long and uses 10 AWG wire.
K676BSR
900 Amp, 15/25kV, 600 Series Straight Receptacle Housing, (Lug and Cable Adapter not included) with Test Point, Deadbreak.
Frequently Asked Questions
Where is the GAD installed in an electrical system?
The Elastimold GAD easily installs in the rear interface of a 600 A series elbow connector (T-body), providing a direct and permanent grounding connection.
What types of grounding clamps are compatible with the GAD?
The GAD is available for both C-clamp and ball-stud grounding clamp types. Series GAD and GADDR are for C-clamps, while BGAD and BGADDR are for ball-stud connections.
What are the voltage classes for the GAD?
The Elastimold GAD is available for 15 kV, 25 kV, and 35 kV system classes.
What fault current can the GAD withstand?
The Elastimold GAD has a short circuit withstand rating of up to 25 kA. It is designed for 600 A and 900 A applications.
What is the Elastimold GAD used for?
The Elastimold grounding-aid device (GAD) provides a permanent, reliable, direct 600 A or 900 A, 25 kA rated ground connection in underground systems when fault currents exceed 10 kA.
Where is the GAD installed in an electrical system?
The Elastimold GAD easily installs in the rear interface of a 600 A series elbow connector (T-body), providing a direct and permanent grounding connection.
What types of grounding clamps are compatible with the GAD?
The GAD is available for both C-clamp and ball-stud grounding clamp types. Series GAD and GADDR are for C-clamps, while BGAD and BGADDR are for ball-stud connections.
What are the voltage classes for the GAD?
The Elastimold GAD is available for 15 kV, 25 kV, and 35 kV system classes.
What is the Elastimold GAD used for?
The Elastimold grounding-aid device (GAD) provides a permanent, reliable, direct 600 A or 900 A, 25 kA rated ground connection in underground systems when fault currents exceed 10 kA.
What fault current can the GAD withstand?
The Elastimold GAD has a short circuit withstand rating of up to 25 kA. It is designed for 600 A and 900 A applications.
How to Install the K671GAD Deadbreak Grounding Device and K676GADDR Insulated Cap
This guide provides step-by-step instructions for the safe installation of the K671GAD Deadbreak Grounding Device and the K676GADDR Insulated Cap with Test Point onto a 600Amp elbow, including wiring, lubrication, and torque specifications.
Tools needed:
600ATM assembly tool, Torque wrench, 2 hotsticks
Supplies needed:
Lubricant (supplied), No. 14AWG (2.55mm) copper wire or equivalent
- Prepare for Installation and Lubricate Interfaces
DANGER: Ensure all apparatus is de-energized before beginning installation. This product must be installed by competent personnel trained in high voltage electrical equipment safety practices. Inspect all parts for damage, proper rating, and compatibility with mating parts. Clean and lubricate the K671GAD Grounding Connector interface and the 600Amp elbow interface using only the supplied lubricant. DO NOT SUBSTITUTE, as other lubricants may harm the product or mating parts.
- Install and Ground the K671GAD Grounding Connector
Insert the K671GAD Grounding Connector into the 600Amp elbow and rotate it clockwise to engage the stud. Insert the 600ATM assembly tool into the K671GAD Grounding Connector. Using a torque wrench, continue rotating clockwise until the connector stops, then tighten to 55-60 foot-pounds torque. Remove the 600ATM tool. Using a No. 14AWG (2.55mm) copper wire or equivalent, insert one end through the grounding eye on the K671GAD Grounding Connector. Twist the wire tightly, taking care not to damage the eye. Connect the free end of this grounding wire to the system ground.
- Install and Ground the K676GADDR Insulated Cap
Prepare a No. 14AWG (2.55mm) copper wire or equivalent. Insert one end through the grounding eye of the K676GADDR insulated cap, form a small loop, and twist tightly without damaging the eye. Connect the free end of this grounding wire to the system ground. Ensure the wire length is sufficient to reach the grounding point and wrap around the insulated cap approximately 10 times (90 inches) during assembly. Clean and lubricate the K676GADDR insulating cap and the K671GAD interface using only the supplied lubricant. Attach the first hotstick tool to the insulated cap's assembly/disassembly bail. Push the cap receptacle onto the K671GAD bushing interface until it stops. With a second hotstick, engage the grounding wire and establish slight tension, wrapping it loosely around the center of the insulated cap body. While pushing against the bushing interface with the first hotstick, rotate the cap clockwise until the threads engage. Discontinue pushing and continue turning until resistance is felt. Tighten to a maximum of 15 ft-lb. DO NOT OVERTIGHTEN. Remove the second hotstick.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.