Contact for Pricing
Overview
- 15/25kV voltage rating for medium-voltage applications
- 600 Series Deadbreak design for safe circuit isolation
- Factory-assembled, non-field-removable stud for secure connection
- Reducing tap well functionality for flexible connections
- Manufactured by ABB - Installation Products
Specifications
Application | 15/25 kV, 600 Amps |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Reducing Tap Well |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.6000 L |
Package Weight (Metric) | 0.7260 kg |
K650RTW
15/25kV 600 Series Deadbreak Reducing Tap Well. Length 5.37 inch. Width 3 inch not counting bracket. 600/200 Amps
K655BLR-BIP
15/25kV 600 Series Deadbreak Elbow without Test Point Housing Only (with Stud), Basic Insulating Plug.
Frequently Asked Questions
How do I order the K650RTW tap well?
To order the 15/25kV, 600A reducing tap well, specify K650RTW.
What is the primary application of the K650RTW?
The K650RTW permits a 200A deadbreak or loadbreak tap-off from a 600A connector.
What inserts are compatible with the K650RTW tap?
The K650RTW 200A tap accepts Elastimold® 200A deadbreak and loadbreak inserts.
What are the voltage classes for the K650RTW?
The K650RTW is fully rated for 15kV and 28kV voltage classes.
What is the continuous current rating?
The continuous current rating for the K650RTW is 600 Amp.
What is the momentary current rating?
The momentary current rating for the K650RTW is 25kA Symmetrical for 10 cycles.
What is the maximum operating voltage for the 15kV class?
For the 15kV voltage class, the maximum phase-to-ground operating voltage is 8.3kV and phase-to-phase is 14.4kV.
What is the maximum operating voltage for the 28kV class?
For the 28kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV and phase-to-phase is 28kV.
What is the BIL impulse withstand for the 15kV class?
The BIL impulse withstand rating for the 15kV voltage class is 95kV.
What is the BIL impulse withstand for the 28kV class?
The BIL impulse withstand rating for the 28kV voltage class is 140kV.
How to Install 15/25/35kV 600/900 AMP Deadbreak Plug and Well Products
This guide provides step-by-step instructions for the safe installation and initial setup of 15/25/35kV 600/900 AMP Deadbreak Plug and Well Products, including mating with elbows or bushing extensions and performing voltage tests.
Estimated time: 1h
Tools needed:
Torque wrench, ELASTIMOLD 600SW spanner wrench, Hotstick, Suitable sensing device (for capacitive test points)
Supplies needed:
Lubricant (supplied with product), Silicone lubricant, HV insulated caps or connectors (to replace shipping covers)
- Prepare for Installation and Inspect Components Safely
DANGER: Ensure all apparatus is de-energized before starting installation or removal of parts. Do not touch or move energized products in the work area. This product must be installed only by competent personnel trained in good safety practices involving high voltage electrical equipment. Check the contents of the package to ensure they are complete and undamaged. Inspect all parts (plug, well, elbow, bushing extension) for any damage, verify their rating, and confirm compatibility with mating parts. Check all components to ensure proper fit with the cable and/or mating products. If the product was supplied with protective shipping covers, remove them and replace with the appropriate HV insulated cap(s) or connector(s) before submerging or energizing the circuit. Have all required tools at hand and maintain cleanliness throughout the procedure.
- Prepare and Mate the Plug/Well Assembly
Remove any remaining protective caps from the plug or well product. If the 600 amp mating interface on the plug or well is not equipped with a stud, hand tighten the stud (which comes packaged with the elbow or bushing extension) into it. Lubricate both the elbow and its mating part as indicated, using only the lubricant supplied with the product. DO NOT SUBSTITUTE, as other lubricants may be harmful to the products. Ensure the surfaces of the elbow and mating parts are clean before mating. Push the plug or well firmly into the elbow or bushing extension and engage the threads until fully seated.
- Torque Tighten the Connection According to Plug Type
For Insulating Plugs: Use a torque wrench and tighten the connection, exerting 50 to 60 foot-pounds of torque. For Connector Plugs, Tap Plugs, or Tap Wells: Use a torque wrench with an ELASTIMOLD 600SW spanner wrench. Tighten to an indicated torque reading of 40 to 48 foot-pounds (note that this is not the actual applied torque). For K651 and 750 Rubber Connecting Plugs, refer to special instructions IS-0915 for specific torque requirements.
- Install Voltage Detection Cap and Perform Voltage Test (If Applicable)
If an insulating plug is used as a mating part, clean and lubricate the inner surface of the voltage detection cap with silicone lubricant. Place the cap onto the elbow and push down hard until it snaps securely into place. To Perform Voltage Test: Remove the test point cap using a hotstick. Peel it off at an angle rather than pulling directly in line with the test point assembly. WARNING: The voltage test point is a capacitance device and is not directly connected to the conductor. Do not use conventional voltage measuring equipment. Follow the manufacturer’s directions for the specific meter used. Test with a suitable sensing device, designed for use with separable connectors manufactured with capacitive test points, to determine if the cable is energized. Safety: Contamination, moisture, dirt, or using the wrong measuring equipment can provide a false 'no voltage' indication. To prevent serious or fatal injury, treat the elbow as energized until the 'no voltage' test point indication is confirmed by other means. After voltage detection, clean and lubricate the inside surface of the cap with silicone lubricant and replace it on the test point.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.