
ABB Installation Products K1601-PC-S1 15/25kv, Short Shank Bushing Well with Bail Tabs and Non-Replaceable Well Stud (2-3/4…
UPC: 783786641598
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15/25kV voltage rating
- Short shank design with 2-3/4 inch bushing shank length
- Side mount configuration
- Integrated bail tabs for secure handling
- Non-replaceable well stud for permanent connection
Specifications
Application | 15/25 kV, 200 Amps |
Material | EPDM-Rubber |
Size | Diameter 3.63 in |
Special Features | Side Mount |
Standard | ANSI/IEEE 386 Standard |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Short Shank Bushing Well with Bail Tabs |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.9500 L |
Package Weight (Metric) | 0.4310 kg |

150-TB-2
15/25kV, T-Splice 6-3/4 inch Long Bail Assembly, Made of Stainless Steel, Used for Assisting Cable to Transformer Connections. Non-Current Carrying. The 150TB2 bailing assembly kit consists of a modified hold down bail for securing Elastimold® tee splice K150T to a K150DP Deadbreak insulating plug. This assembly provides positive hold down force between the tee splice and the insulating plug.
K1601-PC-T2R
15/25kv, Long Shank Well Without Bail Tabs and With Replaceable Well Stud (9-1/4 inch Bushing Shank Length)
L1601-PC-S2
35kv, Short Shank Well without Bail Tabs and Non-Replaceable Well Stud (2-3/4 inch Bushing Shank Length), side mount
L1601-PC-T1R
35kv, Long Shank Well with Bail Tabs and With Replaceable Well Stud (9-1/4 inch Bushing Shank Length)
K1601-PC-T1R
15/25kv, Long Shank Well with Bail Tabs and With Replaceable Well Stud (9-1/4 inch Bushing Shank Length)Frequently Asked Questions
What is included in each K1601PC-S1 kit?
Each kit contains one Epoxy Flanged Well, Silicone Lubricant, and an Instruction Sheet (IS-0061).
What is the K1601PC-S1 bushing well designed for?
The K1601PC-S1 bushing well is designed for direct mounting in electrical apparatus on 200-Amp systems, through 15/25kV. It accepts Elastimold non-loadbreak, loadbreak, and feed-thru inserts.
What are typical applications for this bushing well?
Typical applications for the K1601PC-S1 bushing well include pad-mounted, vault-type, and submersible transformers, as well as switchgear.
What is the continuous current rating of the bushing well?
The continuous current rating for the K1601PC-S1 bushing well is 200 Amps.
What materials are used in the bushing well construction?
The bushing well is molded of epoxy and features a stainless steel flange. It also has a conductive rubber shield at the mating surface.
Can the bushing well be used with removable studs?
Yes, the bushing well is available in a removable stud well design. This version can be ordered by adding the suffix "-R" to the style number.
What are the available shank lengths for the bushing well?
The bushing wells are available in shank lengths varying from 2.75 inches to 9.25 inches. These are suitable for either cover or side-mount installations.
Does the bushing well provide shielding?
Yes, a conductive rubber shield at the mating surface with connecting devices provides a fully-shielded, cable-to-apparatus connection.
What materials are used in the bushing well construction?
The bushing well is molded of epoxy and features a stainless steel flange. It also has a conductive rubber shield at the mating surface.
Can the bushing well be used with removable studs?
Yes, the bushing well is available in a removable stud well design. This version can be ordered by adding the suffix "-R" to the style number.
How to Weld ELASTIMOLD Apparatus Bushings and Bushing Wells
This guide provides suggested recommendations for welding ELASTIMOLD apparatus bushings and bushing wells, focusing on minimizing heat and ensuring proper clearances. The provided document does not contain information for K1601-PC-S1.
Estimated time: 1h
Tools needed:
TIG welding equipment, MIG welding equipment, Thermocouple detectors, Copper heat sinks
Supplies needed:
No. 308 bare stainless steel wire, Thermally conductive paste, HV insulated caps, Wire connectors
- Prepare Apparatus and Work Area Safely
De-energize all apparatus before starting any work. Inspect all parts for damage, correct rating, and compatibility with mating components. Ensure the work area is clean and all necessary tools and supplies are readily available. If the product came with protective shipping covers, remove them and replace with appropriate HV insulated caps or connectors before energizing or submerging the circuit. Verify the clearance between the epoxy shank and the mounting hole is 3/16” ± 1/16”. Confirm the enclosure cover thickness does not exceed 1/4”.
- Set Up Welding Environment and Heat Management
Position copper heat sinks to minimize heat flow to the epoxy, applying thermally conductive paste at the contact faces of the flange and cover. Ensure adequate venting is provided for the heat sinks. Do not thread heat sinks to the bushing or bushing well stud to prevent integrity issues from expansion. Ensure all surfaces (tank, bushing, and bushing well) are thoroughly clean and free from contamination like paint or grease. Minimize air currents in the welding area to avoid disturbing the gas atmosphere during welding.
- Perform Welding with Controlled Heat Application
Use either Inert-gas, tungsten-arc welding (TIG) or Short-arc welding (MIG) processes with No. 308 bare stainless steel wire. Keep the welding heat to a minimum; the visible heat line should not exceed 1/8” from the weld and 3/16” from the O.D. of the flange. Continuously monitor temperatures at critical points using thermocouple detectors, ensuring they do not exceed 225°F. If using non-water cooled heat sinks, remove them promptly after welding and air cool the bushing to prevent heat from flowing back into the epoxy. Handle the heated stud and flange with care before and after welding to minimize applied forces.
- Complete Final Assembly and Post-Welding Checks
Avoid applying any torque to the epoxy when making bus bar connections. Verify critical clearances from the apparatus connection to enclosure stiffeners and adjacent ground planes. Ensure the oil level covering the immersed stud connection is greater than 2 inches. If the equipment requires thermal baking to cure surface finishes, ensure the bake sequence does not exceed 130°F or 8 hours, and that bushing metallic contacts are not mechanically loaded internally or externally during this process.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.

