Authorized ABB Distributor (Installation Products)
ABB - Installation Products K1501J4U-8 - 200 Amp, 15/25kV, Deadbreak Elbow, 4 Point Junction. Bails are required but not included, order separately. Center to Center spacing equals 4 inches.

ABB Installation Products K1501J4U-8 200 Amp, 15/25kV, Deadbreak Elbow, 4 Point Junction. Bails are required but not…

UPC: 783786638086


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB K1501J4U-8 is a 15/25kV, 200 Amp deadbreak 4-way junction designed for medium-voltage power distribution. This fully shielded, fully submersible connector features a 100% peroxide-cured molded rubber housing, incorporating both insulation and conductive EPDM materials for reliable performance. It is engineered to mate with Elastimold® elbow connectors, including models 156LR, K150T, K150DR, and K151SR. The center-to-center spacing is 4 inches. This deadbreak junction meets ANSI/IEEE Standard 386 requirements. For the 15kV voltage class, it operates at 8.3kV phase-to-ground, with a maximum phase-to-phase of 14.4kV, and a 95kV BIL impulse withstand. For the 25kV voltage class, it operates at 15.2kV phase-to-ground, with a maximum phase-to-phase of 26.3kV, and a 125kV BIL impulse withstand. Both voltage classes offer a 200 Amp continuous rating and a 10kA symmetrical momentary rating for 10 cycles. The unit provides corona extinction at 3pC sensitivity. Each kit includes the molded junction, mounting bracket, lubricant tubes, installation instructions, and protective shipping caps. Bails are required and must be ordered separately. Applications include underground distribution systems, pad-mounted transformers, and switchgear where de-energized operation and submersible connections are critical.
  • 15/25kV, 200 Amp Deadbreak 4-Way Junction
  • Fully shielded, fully submersible molded rubber housing
  • 100% peroxide-cured construction with insulation and conductive EPDM materials
  • Mates with Elastimold® Elbow connectors; 4-inch center-to-center spacing

Specifications

Application
15/25 kV, 200 Amps
Connection Type
Deadbreak
Connection Type
Deadbreak Elbow
Current Rating
200 A
Material
EPDM, Conductive EPDM
Mounting Type
Flat or curved, 0/30/45-degree tilt
Poles
4P
Poles
4 Point Junction
Series
K1501J
Series
K1501J4U
Size
4 inches (center to center spacing)
Size
4 inches C-C
Size
4" C-C spacing
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Elbow 4 Point Junction
Voltage Rating
15/25 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
10.2000 L
Package Weight (Metric)
4.6270 kg
15/25kV, T-Splice 6-3/4 inch Long Bail Assembly, Made of Stainless Steel, Used for Assisting Cable to Transformer Connections. Non-Current Carrying. The 150TB2 bailing assembly kit consists of a modified hold down bail for securing Elastimold® tee splice K150T to a K150DP Deadbreak insulating plug. This assembly provides positive hold down force between the tee splice and the insulating plug.

150-TB-2

15/25kV, T-Splice 6-3/4 inch Long Bail Assembly, Made of Stainless Steel, Used for Assisting Cable to Transformer Connections. Non-Current Carrying. The 150TB2 bailing assembly kit consists of a modified hold down bail for securing Elastimold® tee splice K150T to a K150DP Deadbreak insulating plug. This assembly provides positive hold down force between the tee splice and the insulating plug.
HMI door mounting kit with 15M cable

181B2258

HMI door mounting kit with 15M cable
Polarizing Cover / Hermaphroditic Cover, Black, Nylon, 8 Position, AMPMODU IV/V

103350-4

Polarizing Cover / Hermaphroditic Cover, Black, Nylon, 8 Position, AMPMODU IV/V
Basic Insulating Plug, Length 4.533 inch Diameter 3 inch, Epoxy

650BIP

Basic Insulating Plug, Length 4.533 inch Diameter 3 inch, Epoxy
35kv, 600 Amp, Short 2-15/16 inch Shank Bushing with out Stud, with standard aluminum conductor rod, includes 5/8-11 threaded hole at elbow end, includes shipping cap, 200 BIL

750S1-200

35kv, 600 Amp, Short 2-15/16 inch Shank Bushing with out Stud, with standard aluminum conductor rod, includes 5/8-11 threaded hole at elbow end, includes shipping cap, 200 BIL
200 Amps, 25kV, Access Follower, includes Probe and Probe Wrench. Tin Plated Copper

274AF

200 Amps, 25kV, Access Follower, includes Probe and Probe Wrench. Tin Plated Copper
Molded Housing - Grounding Rod Adapter Assembly, Size E - Insulation Diameter Range .530 to .680 inch. includes Silicone Lubricant, Molded Housing, Grounding Rod and Instruction Sheet.

21MA-E

Molded Housing - Grounding Rod Adapter Assembly, Size E - Insulation Diameter Range .530 to .680 inch. includes Silicone Lubricant, Molded Housing, Grounding Rod and Instruction Sheet.
600 Amp, 15/25KV, Grounding Plug, Ground lead 2/0 AWG X 30 inches, Stud is factory assembled and not field removable.

650GPSP

600 Amp, 15/25KV, Grounding Plug, Ground lead 2/0 AWG X 30 inches, Stud is factory assembled and not field removable.

Frequently Asked Questions

What is the K1501J4-U-8 product?

The K1501J4-U-8 is a 15/25kV, 200 Amp Deadbreak 4-Way Junction with a stainless steel bracket. It features a fully shielded, fully submersible molded rubber housing.

Is the junction designed for energized or de-energized operation?

The Elastimold® deadbreak junctions are designed for de-energized operation.

What is the momentary current rating for the junction?

The momentary current rating is 10kA Symmetrical for 10 Cycles for both 15kV and 25kV voltage classes.

What is the 25kV BIL impulse withstand rating?

For the 25kV voltage class, the BIL impulse withstand rating is 125kV (1.2 x 50 microsecond wave).

What is the 15kV BIL impulse withstand rating?

For the 15kV voltage class, the BIL impulse withstand rating is 95kV (1.2 x 50 microsecond wave).

What industry standards does the junction meet?

The K1501J4-U-8 junction meets ANSI/IEEE Standard 386, Latest Revision.

What mounting options are available for the junction?

The unit includes mounting hardware for flat or curved surfaces and provides 0, 30, or 45 degree tilt mounting arrangements.

What Elastimold® products are compatible with this junction?

The junction is designed to mate with Elastimold® products including the 156LR elbow connector, K150T, K150DR, and K151SR.

Is the K1501J4-U-8 junction submersible?

Yes, the K1501J4-U-8 junction features a fully shielded and fully submersible molded rubber housing.

What is the continuous current rating of the junction?

The K1501J4-U-8 deadbreak junction has a continuous current rating of 200 Amps for both 15kV and 25kV voltage classes.

How to Install the K1501J4U-8 Deadbreak Junction

This guide provides step-by-step instructions for the safe and proper installation and mounting of the K1501J4U-8 deadbreak junction, including grounding and securing procedures on a flat surface.

Estimated time: 1h

Tools needed:

Wrench, Drill, Marker, Wire Strippers

Supplies needed:

Suitable Wall Fasteners, 1/2 inch Bolts, Ground Wire, Hold-Down Bails, Lubricant

  1. Prepare for Installation and Safety Check

    WARNING: All apparatus must be de-energized during installation or removal of parts. Do not connect or disconnect mating products while energized. Inspect all package contents and components for completeness, damage, and proper fit with cable and/or mating products. Ensure all required tools are at hand and maintain cleanliness. If the product has protective shipping covers, remove them and replace with appropriate HV insulated caps or connectors before submerging or energizing the circuit.

  2. Determine Mounting Angle and Mark Location

    Determine the desired mounting angle (adjustable from 0 to 45 degrees above or below the horizontal in 15-degree increments) and the desired direction of the slotted bracket. Loosely attach the pre-assembled universal mounting brackets to the junction back plate. Place the junction assembly against the wall in the desired location and mark the slot locations on the wall for drilling.

  3. Mount Brackets to Wall

    Remove the slotted mounting brackets from the junction assembly. Attach the brackets securely to the wall using suitable fasteners (supplied by the user). Ensure the brackets are firmly in place and correctly spaced according to the marked locations. CAUTION: One or both mounting brackets can be reversed to change the distance required between bolt centers.

  4. Assemble Junction to Brackets and Secure

    Assemble the deadbreak junction to the mounted slotted brackets. Tighten all bolts securely to ensure no movement of the junction during operation. Verify that the parking stands are in an upright position as shown in the diagram.

  5. Ground the Junction and Attach Hold-Down Bails

    Attach a suitable ground wire to the ground lug on the junction. Connect this ground wire to the system ground, ensuring it is sized to carry the rated fault current or system fault current if less than the product rating. Attach hold-down bails (supplied with the elbow) to the junction to mechanically secure deadbreak connectors.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.