Authorized ABB Distributor (Installation Products)
ABB - Installation Products J3-222-35 - 3 Point Junction, with three 200 Amp Bushing Well Interfaces, 35kV, No Tilt Mounting.

ABB Installation Products J3-222-35 3 Point Junction, with three 200 Amp Bushing Well Interfaces, 35kV, No Tilt Mounting.

UPC: 075114204224


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB J3-222-35 is a 35kV, 3-pole junction designed for medium-voltage distribution systems requiring reliable, high-current connections. This unit features three 200 Amp bushing well interfaces, enabling direct termination of cables or transformers without additional adapters. The no-tilt mounting configuration simplifies installation in confined spaces or vertical configurations, reducing labor time and potential misalignment issues. Key applications include utility substations, industrial power distribution, renewable energy interconnections, and commercial facilities where space efficiency and high-current handling are critical. The 35kV rating aligns with ANSI C37.06 standards for medium-voltage systems, ensuring compatibility with standard switchgear and transformers. The compact design minimizes footprint while maintaining full-rated performance, making it ideal for retrofits or new construction where real estate is limited. The bushing wells accept industry-standard 200A elbows or inserts, providing flexibility for future system upgrades or reconfigurations.
  • 35kV voltage rating for medium-voltage distribution
  • Three 200 Amp bushing well interfaces for direct cable/transformer termination
  • No tilt mounting for simplified installation in confined spaces
  • 3-pole design for balanced three-phase systems
  • Factory-tested for dielectric strength and current capacity

Specifications

Application
Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass
Connection
Push-In
Material
EPDM-Rubber and Stainless Steel Mounting Brackets
Mounting
No Tilt Mounting Bracket
Size
Overall Length 19 inches, Width 6-3/4 inches
Special Features
4 inch Center Spacing
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Multi-Point Junction - 3 Points
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.

J6-622226-25

6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.
3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 35kV, 6-1/2 inch centers. No Tilt Mounting.

J3-626-35-SV

3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 35kV, 6-1/2 inch centers. No Tilt Mounting.
3 Point Junction, with three 200 Amp Bushing Well Interfaces, 15kV, 6-1/2 inch centers. No Parking Stand.

J3-222-15-SV-N

3 Point Junction, with three 200 Amp Bushing Well Interfaces, 15kV, 6-1/2 inch centers. No Parking Stand.
3 Point Junction, with three 200 Amp Bushing Well Interfaces, 25kV, 6-1/2 inch centers. No Parking Stand.

J3-222-25-SV-N

3 Point Junction, with three 200 Amp Bushing Well Interfaces, 25kV, 6-1/2 inch centers. No Parking Stand.
6 Point Junction, with one 200 Amp Bushing Well Interfaces, five 600 Amp Bushing Interfaces, 25kV, 6-1/2 inch centers. Tilt Mounting Adapter.

J6-266666-25-SV-TMA

6 Point Junction, with one 200 Amp Bushing Well Interfaces, five 600 Amp Bushing Interfaces, 25kV, 6-1/2 inch centers. Tilt Mounting Adapter.
5 Point Junction, with five 600 Amp Bushing Interfaces, 25kV, Copper

J5-66666-25-CU

5 Point Junction, with five 600 Amp Bushing Interfaces, 25kV, Copper
5 Point Junction, with five 600 Amp Bushing Interfaces, 25kV, Right Parking Stand only

J5-66666-25-R

5 Point Junction, with five 600 Amp Bushing Interfaces, 25kV, Right Parking Stand only
5 Point Junction, with one 200 Amp Bushing Well Interfaces and four 600 Amp Bushing Interfaces, 35kV, No Tilt Mounting Bracket

J5-26666-35

5 Point Junction, with one 200 Amp Bushing Well Interfaces and four 600 Amp Bushing Interfaces, 35kV, No Tilt Mounting Bracket

Frequently Asked Questions

What are the momentary and fault close ratings for 600 Amp?

For 600 Amp, the momentary and fault close rating is 25kA Symmetrical for 10 cycles.

What is the one-minute AC withstand for 15kV class?

For the 15kV voltage class, the one-minute AC withstand is 34kV AC.

What is the housing type of the junction?

The junction features a fully shielded and fully submersible molded rubber housing.

What is included in a standard junction kit?

Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.

What standard do these junctions meet?

The junctions meet ANSI/IEEE Standard 386, Latest Revision.

What is the impulse withstand for 35kV class?

For the 35kV voltage class, the impulse withstand (BIL) is 150kV (1.2 x 50 microsecond wave).

What is the maximum operating voltage for 25kV class?

For the 25kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV.

What applications are these junctions designed for?

ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They can be used for sectionalizing, looping, tapping, and equipment bypass.

What are the voltage classes for this product?

The multipoint junctions are available in 15kV, 25kV, and 35kV voltage classes.

What are the continuous current ratings?

The junctions have continuous current ratings of either 600 Amp or 200 Amp.

How to Install a Deadbreak Junction (Universal Mount)

This guide provides step-by-step instructions for installing 15/25/35kV, 600/900 Ampere deadbreak junctions using the universal mount method. It covers mounting, assembly, and grounding procedures for safe and secure installation.

Estimated time: 1h

Tools needed:

Wrench, Wire strippers, Screwdriver, Multimeter

Supplies needed:

Suitable mounting fasteners, 3/8" Hex Head Cap Screws, 3/8" Ext. Tooth Lock Washers, 3/8" Hex Nuts, 1/2" Hex Head Cap Screws, 1/2" Split Lock Washers, 1/2" Hex Nuts, Grounding wire, ELASTIMOLD approved lubricant, HV insulated caps (if needed)

  1. De-energize Apparatus and Ensure Safety

    DANGER: All apparatus must be de-energized during installation or removal of part(s). Verify the circuit is de-energized before proceeding. This product should be installed only by competent personnel trained in good safety practices involving high voltage electrical equipment. Failure to follow these instructions will result in damage to the product and serious or fatal injury.

  2. Determine Mounting Location and Mark Slots

    Determine the desired location for the junction assembly. Use the base plate as a template, place it on the mounting surface, and mark the four slot locations for bracket attachment.

  3. Attach Initial Universal Brackets

    Attach two (2) universal brackets to the marked slot locations on the flat surface using suitable fasteners. Tighten securely to ensure no movement during operation.

  4. Attach Remaining Universal Brackets

    Attach the remaining two (2) universal brackets to the two brackets already mounted on the surface at the desired angle. Use the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten securely.

  5. Assemble Junction to Base Bracket and Plate

    Assemble the deadbreak junction to the base bracket assembly and base plate. Use two (2) 1/2” hex head cap screws, two (2) 1/2” split lock washers, and two (2) 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten securely.

  6. Attach Junction Assembly to Universal Brackets

    Attach the complete deadbreak junction assembly to the universal brackets using the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Ensure the parking stand is in the upright position and tighten all hardware securely.

  7. Ground the Junction Assembly

    Ground the base bracket assembly and the junction’s black conductive jacket. Use the provided grounding lug on the base bracket, which accommodates wire sizes from No. 2 solid to 1/0 stranded. Connect a suitable grounding wire and ensure a secure connection.

  8. Prepare for Operation

    Remove all protective shipping caps and clean the operating interfaces. Lubricate each interface with an ELASTIMOLD approved lubricant; do not substitute. If not all operating interfaces are utilized, install appropriate HV insulated caps on unused bushings before energization. Do not use shipping caps for this function as they are not insulated.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.