Contact for Pricing
Overview
- 15KV Voltage Rating
- 4-Point Junction Configuration
- Two 600 Amp Bushing Interfaces
- Two 200 Amp Bushing Well Interfaces
- Right Parking Stand for Stable Mounting
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Connection Type | Bushing Interface |
Current Rating | 600A/200A |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | Right Parking Stand |
Mounting Type | Right Parking Stand |
Size | Overall Length 20.5 inches, Width 6.75 inches |
Special Features | 4 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 4 Points |
Voltage Rating | 15kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
J6-222666-15L
15kV, 200/600 Amp Multipoint Junction. 6-Points, Three 200 Amp Bushing Well Interfaces, Three 600 Amp Bushing Interfaces, 15 kV, Standard 4 inch Spacing, Left Parking Stand OnlyJ4-6666-25-SV-SP
4 Point Junction, four - 600 Amp Bushing interface, 25KV, SV - Optional 6-1/2 inch spacing, with Bracket
J3-266-25
3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 25kV, No Tilt Mounting.J3-266-25-SV
3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 25kV, 6-1/2 inch centers. No Tilt Mounting.
J5-26666-15
5 Point Junction, one - 200 Amp Bushing Well interface, four - 600 Amp Bushing interface, 15KV, with BracketJ3-266-15
3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 15kV, No Tilt Mounting.J5-22222-15-R
5 Point Junction, five - 200 Amp Bushing Well interface, 15KV, Right Parking Stand, Short BracketJ3-266-15-TMA
3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 15kV, Tilt Mounting Adapter.Frequently Asked Questions
What voltage classes are available for this product?
The multipoint junctions are available in 15kV, 25kV, and 35kV voltage classes.
What are the continuous current ratings?
The junctions have continuous current ratings of either 600 Amp or 200 Amp.
What are the typical applications for these junctions?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications, used for sectionalizing, looping, tapping, and equipment bypass.
What types of connectors are compatible?
The junctions provide mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp.
What interface spacing options are available?
Units feature a modular design allowing selection of 4'' or 6.5'' interface spacing.
What items are included in a standard kit?
Each kit contains a basic molded junction, mounting hardware, lubricant tubes, installation instructions, and a protective cap.
What is the maximum operating voltage for the 15kV class?
For the 15kV voltage class, the maximum phase-to-ground operating voltage is 8.3kV.
Is the junction housing submersible?
Yes, the product features a fully shielded, fully submersible molded rubber housing.
What standards does this product meet?
The product meets ANSI/IEEE Standard 386, Latest Revision.
What is the maximum operating voltage for the 25kV class?
For the 25kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV.
How to Install an ELASTIMOLD J4 Deadbreak Junction (Universal Mount)
This guide provides step-by-step instructions for installing an ELASTIMOLD J4 deadbreak junction using the universal mount method. It covers mounting, assembly, grounding, and initial preparation of operating interfaces.
Estimated time: 1h 30m
Tools needed:
Wrench Set, Socket Set, Wire Strippers, Screwdriver
Supplies needed:
Suitable fasteners (for surface mounting), Mounting Hardware Prepack (supplied), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps (if needed for unused interfaces)
- Verify De-energized State and Personnel Safety
Before beginning installation, ensure all apparatus and deadbreak connectors are completely de-energized. This product must only be installed by competent personnel trained in high voltage electrical equipment safety practices. Failure to follow these safety instructions can result in serious injury or death.
- Mark Mounting Locations for Base Plate
Determine the desired location for the junction assembly on a flat surface. Use the base plate as a template, place it on the surface, and accurately mark all four slot locations for subsequent bracket attachment.
- Secure First Pair of Universal Brackets
Attach two (2) universal brackets to the marked slot locations on the flat surface using suitable fasteners (user-supplied). Tighten these fasteners securely to prevent any movement of the brackets during operation.
- Assemble Remaining Universal Brackets
Attach the remaining two (2) universal brackets to the two (2) universal brackets already mounted on the surface. Use the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Position them at the desired angle and tighten securely.
- Mount Junction to Base Bracket Assembly
Assemble the deadbreak junction to the base bracket assembly and base plate. Use two (2) supplied 1/2” hex head cap screws, two (2) 1/2” split lock washers, and two (2) 1/2” hex nuts. Attach them to the center mounting holes on the bracket assembly and tighten securely.
- Secure Junction Assembly to Universal Brackets
Attach the entire deadbreak junction assembly (now with base bracket and base plate) to the universal brackets previously mounted on the surface. Use the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Ensure the parking stand is in the upright position and tighten all hardware securely.
- Ground the Base Bracket and Junction Jacket
The base bracket assembly and the junction’s black conductive jacket must be properly grounded. Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket. Ensure a secure and reliable ground connection.
- Prepare Operating Interfaces for Connection
Remove any protective shipping caps from the operating interfaces. Clean each interface thoroughly and lubricate them with an ELASTIMOLD approved lubricant. Do not substitute other lubricants, as they may harm the product. If not all operating interfaces will be utilized, install appropriate HV insulated caps on the unused bushings before energizing the circuit. Do not use shipping caps for this purpose.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.