Authorized ABB Distributor (Installation Products)
ABB - Installation Products J4-2266-25 - 4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 25kV, No Tilt Mounting.

ABB Installation Products J4-2266-25 4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing…

UPC: 783786358991


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB J4-2266-25 is a 4-point multipoint junction designed for reliable medium-voltage power distribution. This unit features two 200 Amp deepwell interfaces and two 600 Amp bushing interfaces, offering versatile connection options for Elastimold Elbow connectors. Rated for 25kV, it meets ANSI/IEEE Standard 386 with a 140kV BIL impulse withstand and 45kV AC one-minute withstand. The junction box boasts a fully shielded, fully submersible molded rubber housing constructed with 100% peroxide-cured EPDM insulation and conductive materials. Brackets are made from 304 stainless steel for corrosion resistance. Applications include subsurface, vault, or padmount installations for sectionalizing, looping, tapping, and equipment bypass. This model includes no tilt mounting for a fixed installation. It provides 25kA Sym for 10 Cycles Momentary & Fault Close on the 600A interfaces and 10kA Sym for 10 Cycles Momentary & Fault Close on the 200A interfaces. The UNSPSC code is 26121630.
  • 25kV Voltage Class with 140kV BIL and 45kV AC one-minute withstand
  • Features two 200 Amp and two 600 Amp bushing well interfaces
  • Fully shielded, fully submersible molded rubber housing
  • 304 stainless steel brackets for corrosion resistance
  • No tilt mounting for fixed installation

Specifications

Application
Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass
Connection
Push-In
Current Rating
200A, 600A
Material
EPDM-Rubber and Stainless Steel Mounting Brackets
Mounting
No Tilt Mounting Bracket
Mounting Type
No Tilt Mounting
Series
J4-2266
Size
Overall Length 23 inches, Width 6-3/4 inches
Special Features
4 inch Center Spacing
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Multi-Point Junction - 4 Points
Voltage Rating
25kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.

J6-622226-25

6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 35kV, No Tilt Mounting.

J4-2266-35

4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 35kV, No Tilt Mounting.
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 25kV, Tilt Mounting Adapter.

J4-2266-25-TMA

4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 25kV, Tilt Mounting Adapter.
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 25kV, 6-1/2 inch centers. No Parking Stand.

J4-2266-25-SV-N

4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 25kV, 6-1/2 inch centers. No Parking Stand.
Multi-Point Junction, 4 Points, two 200 Amp Bushing Well Interfaces, two 600 Amp Bushing Interfaces, 25kv, Standard 4 inch spacing for interfaces, Right Parking Stand only

J4-2266-25-R

Multi-Point Junction, 4 Points, two 200 Amp Bushing Well Interfaces, two 600 Amp Bushing Interfaces, 25kv, Standard 4 inch spacing for interfaces, Right Parking Stand only
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interfaces, 25kV, No Parking Stand.

J4-2266-25-N

4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interfaces, 25kV, No Parking Stand.
4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 35kV, Tilt Mounting Adapter.

J4-2226-35-TMA

4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 35kV, Tilt Mounting Adapter.
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 15kV, Tilt Mounting Adapter.

J4-2266-15-TMA

4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interface, 15kV, Tilt Mounting Adapter.

Frequently Asked Questions

What standard does the product meet?

The ELASTIMOLD junctions meet ANSI/IEEE Standard 386, Latest Revision.

What is included in a standard junction kit?

Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.

What are the continuous current ratings?

The junctions are rated for either 600 Amp continuous current with 25kA Sym momentary, or 200 Amp continuous current with 10kA Sym momentary.

What Elastimold connectors are compatible?

The junctions provide mating for Elastimold Elbow connectors, supporting both 600 Amp and 200 Amp types.

What materials are used in the junction's construction?

The junction features a fully shielded, submersible molded rubber housing made of 100% peroxide-cured EPDM materials. Brackets utilize 304 stainless steel for corrosion prevention.

What applications are these junctions designed for?

ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They can be used for sectionalizing, looping, tapping, and equipment bypass.

What are the voltage and current ratings?

The junctions are rated for 15kV, 25kV, or 35kV voltage classes. They support continuous currents of 200 Amp or 600 Amp.

What are the continuous current ratings?

The junctions are rated for either 600 Amp continuous current with 25kA Sym momentary, or 200 Amp continuous current with 10kA Sym momentary.

What applications are these junctions designed for?

ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They can be used for sectionalizing, looping, tapping, and equipment bypass.

What are the voltage and current ratings?

The junctions are rated for 15kV, 25kV, or 35kV voltage classes. They support continuous currents of 200 Amp or 600 Amp.

How to Install a Four-Point Deadbreak Junction (Universal Mount)

This guide provides step-by-step instructions for installing a J4-2266-25 Four-Point Deadbreak Junction using the universal mounting method. It covers mounting, assembly, and grounding procedures.

Estimated time: 1h

Tools needed:

Wrench, Torque Wrench, Wire Strippers, Multimeter, Marker, Measuring Tape

Supplies needed:

Fasteners (suitable for mounting surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps (if needed)

  1. De-energize Circuit and Inspect Components

    DANGER: Before beginning any installation, ensure all apparatus is de-energized. Verify the circuit is de-energized using appropriate safety procedures and equipment. Inspect all parts for damage, correct rating, and compatibility with mating parts. Remove any protective shipping covers and replace with appropriate HV insulated caps or connectors before submerging or energizing.

  2. Determine Mounting Location and Mark Slots

    Determine the desired location for the junction assembly. Use the base plate as a template, place it on the mounting surface, and mark the four slot locations for the universal brackets.

  3. Secure First Pair of Universal Brackets

    Attach two universal brackets to the marked slot locations on the flat surface using suitable fasteners. Tighten them securely to prevent any movement during operation.

  4. Assemble Remaining Universal Brackets

    Attach the remaining two universal brackets to the two brackets already mounted on the surface at the desired angle using the supplied 3/8” hex head cap screws, external tooth lock washers, and hex nuts. Tighten securely.

  5. Assemble Deadbreak Junction to Base Assembly

    Assemble the deadbreak junction to the base bracket assembly and base plate. Use two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten securely.

  6. Mount Junction Assembly to Universal Brackets

    Attach the complete deadbreak junction assembly to the universal brackets using the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Ensure the parking stand is in the upright position and tighten all hardware securely.

  7. Ground the Junction Assembly

    The base bracket assembly and the junction’s black conductive jacket must be grounded. Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket for this purpose.

  8. Prepare Operating Interfaces

    Remove all protective caps and clean the operating interfaces. Lubricate each interface with an ELASTIMOLD approved lubricant. If any operating interfaces are not utilized, install appropriate HV insulated caps on the unused bushings before energization. Do not use protective shipping caps for this function.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.