Authorized ABB Distributor (Installation Products)
ABB - Installation Products J4-2226-25 - 4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 25kV, No Tilt Mounting.

ABB Installation Products J4-2226-25 4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing…

UPC: 783786522675


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB J4-2226-25 is a 4-point medium-voltage junction box designed for reliable power distribution in industrial, commercial, and utility applications. This unit features three 200 Amp bushing well interfaces and one 600 Amp bushing interface, all rated for 25kV service, making it suitable for medium-voltage systems up to 25,000 volts. The junction box includes a factory-installed fifth jaw (TM5JA bused) for enhanced connectivity. Its no-tilt mounting design allows for stable installation in vertical or horizontal orientations without requiring additional structural support. The ABB J4-2226-25 is compatible with standard cable terminations, facilitating clean and organized connections within switchgear, transformers, and control panels. This junction box is engineered for critical power distribution points requiring multiple cable entries. Common applications include power distribution in substations and switchgear, integration with medium-voltage transformers and motors, branch circuit connections in industrial facilities and manufacturing plants, and renewable energy installations. The ABB J4-2226-25 is part of ABB Installation Products' medium-voltage junction box offerings, designed to meet the requirements of modern electrical distribution systems. Its standardized design ensures compatibility with ABB's electrical components, providing a dependable solution for specifying medium-voltage junction points. The unit includes terminal bolt sets M8X25.
  • Four total bushing well interfaces: three 200 Amp and one 600 Amp.
  • Rated for 25kV medium-voltage applications.
  • No-tilt mounting design for stable vertical or horizontal installation.
  • Includes factory-installed fifth jaw (TM5JA bused).
  • Terminal bolt set M8X25 included.

Specifications

Application
Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass
Connection
Push-In
Current Rating
200 A, 200 A, 200 A, 600 A
Material
EPDM-Rubber and Stainless Steel Mounting Brackets
Mounting
No Tilt Mounting Bracket
Mounting Type
No Tilt Mounting
Size
Overall Length 23 inches, Width 6-3/4 inches
Special Features
4 inch Center Spacing
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Multi-Point Junction - 4 Points
Voltage Rating
25 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.

J6-622226-25

6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interfaces, 15kV, No Parking Stand.

J4-2266-15-N

4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interfaces, 15kV, No Parking Stand.
4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 15kV, No Tilt Mounting.

J4-2226-15

4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 15kV, No Tilt Mounting.
4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 15kV, 6-1/2 inch centers. No Tilt Mounting.

J4-2226-15-SV

4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 15kV, 6-1/2 inch centers. No Tilt Mounting.
4 Point Junction, with four 200 Amp Bushing Well Interfaces, 25kV, Tilt Mounting Adapter.

J4-2222-25-TMA

4 Point Junction, with four 200 Amp Bushing Well Interfaces, 25kV, Tilt Mounting Adapter.
4 Point Junction, with four 200 Amp Bushing Well Interfaces, 25kV, No Tilt Mounting.

J4-2222-25

4 Point Junction, with four 200 Amp Bushing Well Interfaces, 25kV, No Tilt Mounting.
4 Point Junction, with four 200 Amp Bushing Well Interfaces, 35kV, Tilt Mounting Adapter.

J4-2222-35-TMA

4 Point Junction, with four 200 Amp Bushing Well Interfaces, 35kV, Tilt Mounting Adapter.
4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 15kV, No Parking Stand.

J4-2226-15-N

4 Point Junction, with three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing interface, 15kV, No Parking Stand.

Frequently Asked Questions

What are the voltage and current ratings?

The product is a 15/25/35kV, 200/600 Amp molded multipoint junction.

What are the continuous current ratings?

Continuous current ratings are 600 Amps for 600 Amp interfaces and 200 Amps for 200 Amp interfaces.

What interface spacing options are available?

Interface spacing options are standard 4'' spacing or optional 6.5'' spacing (SV).

What mounting and parking stand options are available?

Options include no tilt mounting bracket, Tilt Mounting Adapter (TMA), left parking stand (L), right parking stand (R), or no parking stand (N).

What voltage classes are available for ordering?

Available voltage classes for ordering are 15kV, 25kV, and 35kV.

How many connection points are available?

The junctions are available with 2, 3, 4, 5, or 6 connection points.

What are the momentary and fault close ratings?

Momentary and fault close ratings are 25kA Symmetrical for 10 cycles for 600 Amp, and 10kA Symmetrical for 10 cycles for 200 Amp.

What is the maximum operating voltage for each class?

Maximum phase-to-ground operating voltages are 8.3kV for 15kV class, 16.2kV for 25kV class, and 21.1kV for 35kV class.

What standard does the product meet?

The product meets ANSI/IEEE Standard 386, Latest Revision.

What interface options and spacings are available?

Units offer modular design flexibility, allowing combinations of 200A deepwell or 600A bushing interfaces with 4'' or 6.5'' spacing.

How to Install a J4-2226-25 Four-Point Deadbreak Junction (Universal Mount)

This guide provides step-by-step instructions for installing a J4-2226-25 four-point deadbreak junction using the universal mount method. It covers mounting, assembly, and grounding procedures for safe operation. All apparatus must be de-energized during installation, and this product should only be installed by competent personnel trained in high voltage electrical equipment safety practices.

Estimated time: 45m

Tools needed:

Wrench set (for hex head cap screws and nuts), Marker, Wire strippers

Supplies needed:

Suitable fasteners (for mounting brackets to surface), Grounding wire (No. 2 solid to 1/0 stranded), HV insulated caps (if not all interfaces are used), ELASTIMOLD approved lubricant

  1. Mark Mounting Locations

    Determine the desired location for the junction assembly. Place the base plate on the mounting surface and use it as a template to mark all slot locations for the universal brackets.

  2. Secure Initial Universal Brackets

    Attach two universal brackets to the marked slot locations on the flat surface using suitable fasteners. Tighten them securely to prevent any movement during operation.

  3. Assemble Remaining Universal Brackets

    Attach the remaining two universal brackets to the two brackets already mounted on the surface at the desired angle. Use the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten all hardware securely.

  4. Assemble Deadbreak Junction to Base Bracket

    Connect the deadbreak junction to the base bracket assembly and base plate. Use two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten securely.

  5. Mount Junction Assembly

    Attach the assembled deadbreak junction and base bracket assembly to the universal brackets using the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Tighten all hardware securely. Ensure the parking stand is in an upright position.

  6. Ground the Assembly

    Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket. Ensure the base bracket assembly and the junction's black conductive jacket are properly grounded.

  7. Prepare Operating Interfaces

    Remove any protective shipping covers from the operating interfaces. Clean each interface thoroughly and lubricate them with an ELASTIMOLD approved lubricant. If any operating interfaces are not utilized, install appropriate HV insulated caps on these unused bushings before energizing the circuit. Do not use shipping caps for this purpose.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.