
ABB Installation Products J3-666-35-SV 3 Point Junction, with three 600 Amp Bushing Interfaces, 35kV, 6-1/2 inch centers. No…
UPC: 783786088317
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Three 600 Amp bushing interfaces for high-current power distribution
- 35kV voltage rating for medium-voltage applications
- 6.5 inch centers between bushings for proper cable spacing
- Fixed mounting design without tilt requirements
- Designed for switchgear, substations, and industrial distribution networks
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Connection Type | Bushing Interface |
Current Rating | 600 A |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | No Tilt Mounting Bracket |
Mounting Type | No Tilt Mounting |
Poles | 3 |
Size | Overall Length 26 inches, Width 6-3/4 inches |
Size | 6.5 inch centers |
Special Features | 6-1/2 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 3 Points |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

J4-6226-15
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.
J6-622226-15
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 15kV, No Tilt Mounting.
J6-266662-15
6 Point Junction, with one 200 Amp Bushing Well Interfaces, four 600 Amp Bushing Interface and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.
J3-666-35-SV-N
3 Point Junction, with three 600 Amp Bushing Interfaces, 35kV, 6-1/2 inch centers. No Parking Stand.
J5-22266-15-SV
5 Point Junction, with three 200 Amp Bushing Well Interfaces and two 600 Amp Bushing Interfaces, 15kV, 6-1/2 inch centers. No Tilt Mounting.
J5-22266-15
5 Point Junction, with three 200 Amp Bushing Well Interfaces and two 600 Amp Bushing Interfaces, 15kV, No Tilt Mounting.
J5-22226-15-SV
5 Point Junction, with four 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 15kV, 6-1/2 inch centers. No Tilt Mounting.
J5-62226-25
5 Point Junction, with one 600 Amp Bushing Interfaces, three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interfaces, 25kV, No Tilt Mounting.Frequently Asked Questions
What are the voltage and current ratings?
The JX-XXXXXX-XX junction is rated for 15/25/35kV and 200/600 Amp.
What is the maximum operating voltage for 15kV class?
For the 15kV voltage class, the maximum phase-to-ground operating voltage is 8.3kV.
What is the momentary and fault close rating for 600 Amp?
For 600 Amp junctions, the momentary and fault close rating is 25kA symmetrical for 10 cycles.
What is the continuous current rating for 600 Amp junctions?
The continuous current rating for 600 Amp junctions is 600 Amp.
What is the maximum operating voltage for 35kV class?
For the 35kV voltage class, the maximum phase-to-ground operating voltage is 21.1kV.
What is the maximum operating voltage for 25kV class?
For the 25kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV.
What industry standard does the product meet?
The product meets ANSI/IEEE Standard 386, Latest Revision.
What interface options and spacings are available?
Units offer modular design flexibility with 200A deepwell or 600A bushing interfaces. They are available with 4'' or 6.5'' spacing.
What are the typical applications for these junctions?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They can be used for sectionalizing, looping, tapping, and equipment bypass.
What connectors are compatible with this junction?
It provides mating for both 600 Amp and 200 Amp Elastimold Elbow connectors.
How to Install the J3-666-35-SV Deadbreak Junction (Universal Mount)
This guide provides step-by-step instructions for installing the J3-666-35-SV deadbreak junction using the universal mount method. It covers mounting, assembly, and grounding procedures, ensuring proper setup for sectionalizing, looping, tapping, or apparatus change out.
Estimated time: 1h
Tools needed:
Wrenches (for 3/8" and 1/2" hex nuts/screws), Marker, Wire strippers, Torque wrench
Supplies needed:
J3-666-35-SV Deadbreak Junction, Universal Mount Kit (Base Bracket, Base Plate, 4 Universal Brackets, Mounting Hardware Prepack), Fasteners (suitable for mounting universal brackets to surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps (if needed)
- Ensure Safety and De-energize
De-energize all apparatus before beginning installation. This product should only be installed by competent personnel trained in high voltage electrical equipment safety practices, following all individual user, local, and national work rules. Failure to follow these instructions will result in damage to the product and serious or fatal injury.
- Mark Mounting Locations
Determine the desired location for the junction assembly. Use the base plate as a template to place it on the mounting surface and mark all slot locations for future fastener placement.
- Mount Initial Universal Brackets
Secure two universal brackets to the marked surface using suitable fasteners (supplied by user). Tighten them securely to ensure no movement of the brackets during operation.
- Assemble Remaining Universal Brackets
Attach the remaining two universal brackets to the two brackets already mounted on the surface at the desired angle. Use the supplied hardware, including 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten all connections securely.
- Assemble Junction to Base Bracket and Plate
Assemble the deadbreak junction to the base bracket assembly and base plate. Use two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them through the center mounting holes on the bracket assembly. Tighten securely.
- Attach Junction Assembly to Universal Brackets
Attach the complete deadbreak junction assembly to the universal brackets using the supplied hardware, which includes 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Ensure the parking stand is in the upright position and tighten all fasteners securely.
- Ground the Assembly
The base bracket assembly and the junction’s black conductive jacket must be properly grounded. Connect a suitable grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket for this purpose.
- Prepare Operating Interfaces
Remove all protective shipping covers from the operating interfaces of the junction. Clean each interface thoroughly and then lubricate them with an ELASTIMOLD approved lubricant. It is critical NOT to substitute other lubricants, as they may harm the product or its mating components.
- Install Insulated Caps (if needed)
If any operating interfaces are not going to be utilized, install appropriate HV insulated caps on these unused bushings before energizing the circuit. Do not use the protective shipping caps for this function, as they are not insulated and are only for handling and installation protection.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.