Authorized ABB Distributor (Installation Products)
ABB - Installation Products J3-626-25 - 3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.

ABB Installation Products J3-626-25 3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface…

UPC: 783786385065


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB J3-626-25 3-Point Junction is a medium-voltage electrical distribution component engineered for reliable power routing in 25kV systems. This junction features three connection points: two 600 Amp bushing interfaces and one 200 Amp bushing well interface, enabling flexible high-current distribution for feeder and branch circuits. The unit supports three-phase applications with no tilt mounting required, simplifying installation in vertical or confined spaces such as underground vaults, pad-mounted switchgear, or utility substations. Constructed from composite insulating materials, the J3-626-25 ensures electrical isolation and durability in outdoor or indoor environments. The 600 Amp interfaces accommodate high-current feeder circuits, while the 200 Amp well allows connection to smaller branch circuits or monitoring devices. Compatible with industry-standard bushing interfaces, this junction meets ANSI/IEEE and IEC standards for medium-voltage equipment. Typical applications include industrial power distribution, commercial electrical infrastructure, and utility substations where space-efficient, high-reliability transitions between cables and equipment are required. The no-tilt mounting design reduces installation complexity and minimizes footprint requirements.
  • Three connection points: two 600 Amp bushing interfaces and one 200 Amp bushing well interface
  • No tilt mounting required for simplified installation in vertical or confined spaces
  • Composite insulating materials for electrical isolation and durability in outdoor/indoor environments
  • Compatible with industry-standard bushing interfaces and ANSI/IEEE/IEC standards
  • Ideal for industrial power distribution, commercial infrastructure, and utility substations

Specifications

Application
Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass
Connection
Push-In
Connection Type
Bushing Interface
Current Rating
600 A / 200 A / 600 A
Material
Composite Insulating Materials
Material
EPDM-Rubber and Stainless Steel Mounting Brackets
Mounting
No Tilt Mounting Bracket
Mounting Type
No Tilt Mounting
Poles
3P
Series
J3-626
Size
Overall Length 19 inches, Width 6-3/4 inches
Special Features
4 inch Center Spacing
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Multi-Point Junction - 3 Points
Voltage Rating
25 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
16.2200 L
Package Weight (Metric)
7.3570 kg
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.

J6-622226-25

6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.
6 Point Junction, with five 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 15kV, Tilt Mounting Adapter.

J6-222226-15-TMA

6 Point Junction, with five 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 15kV, Tilt Mounting Adapter.
6 Point Junction, with six 200 Amp Bushing Well Interfaces, 25kV, No Tilt Mounting.

J6-222222-25

6 Point Junction, with six 200 Amp Bushing Well Interfaces, 25kV, No Tilt Mounting.
6 Point Junction, with six 200 Amp Bushing Well Interfaces, 15kV, No Tilt Mounting.

J6-222222-15

6 Point Junction, with six 200 Amp Bushing Well Interfaces, 15kV, No Tilt Mounting.
6 Point Junction, with five 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 15kV, No Tilt Mounting.

J6222226-15

6 Point Junction, with five 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 15kV, No Tilt Mounting.
2 Point Junction, with two 600 Amp Bushing Interfaces, 15kV, 6-1/2 inch centers. No Tilt Mounting.

J2-66-15-SV

2 Point Junction, with two 600 Amp Bushing Interfaces, 15kV, 6-1/2 inch centers. No Tilt Mounting.
5 Point Junction, with two 200 Amp Bushing Well Interfaces and three 600 Amp Bushing Interfaces, 15kV, No Tilt Mounting.

J5-22666-15

5 Point Junction, with two 200 Amp Bushing Well Interfaces and three 600 Amp Bushing Interfaces, 15kV, No Tilt Mounting.
2 Point Junction, 15kV, with two 200 Amp Bushing Well Interfaces, Right Parking Stand.

J2-22-15R

2 Point Junction, 15kV, with two 200 Amp Bushing Well Interfaces, Right Parking Stand.

Frequently Asked Questions

What is the rule for ordering mixed interface types?

When a junction has both 200 Amp and 600 Series interfaces, always start with the 200 Amp side when specifying.

How are interfaces identified in the catalog number?

"2" identifies a 200 Amp Deepwell Interface, and "6" identifies a 600 Amp Bushing Interface. "B" indicates a Blank Position.

What standard do these junctions meet?

The multipoint junctions meet ANSI/IEEE Standard 386, Latest Revision.

What is included in a standard junction kit?

Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.

What is the impulse withstand rating for a 35kV junction?

A 35kV voltage class junction has a 150kV BIL impulse withstand rating (1.2 x 50 microsecond wave).

What connectors are compatible with these junctions?

The junctions provide mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp series.

What materials are used for mounting brackets?

The brackets utilize 304 stainless steel to prevent rusting and corrosion.

What is the maximum operating voltage for a 25kV junction?

For the 25kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV.

What are the available interface spacing options?

Units feature modular design flexibility, allowing selection of 4'' standard spacing or optional 6.5'' spacing.

What are the available voltage classes?

The multipoint junctions are available in 15kV, 25kV, and 35kV voltage classes.

How to Install the J3-626-25 Deadbreak Junction (Universal Mount)

This guide provides step-by-step instructions for installing the J3-626-25 Deadbreak Junction using the Universal Mount method, including mounting, assembly, and grounding procedures. Ensure all apparatus are de-energized before starting.

Estimated time: 1h

Tools needed:

Wrench set (for 3/8" and 1/2" hex nuts/cap screws), Marking tool, Drill (if required for fasteners), Wire strippers

Supplies needed:

J3-626-25 Deadbreak Junction, Mounting Hardware Prepack (included with junction), Suitable fasteners (for mounting brackets to surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricants, HV insulated caps (for unused bushings)

  1. De-energize Apparatus and Inspect Parts

    DANGER: All apparatus must be de-energized during installation or removal of parts. Inspect all parts for damage, correct rating, and compatibility with mating parts before proceeding. This product should only be installed by competent personnel trained in good safety practices involving high voltage electrical equipment.

  2. Determine Location and Mark Mounting Slots

    Determine the desired location for the junction assembly. Use the base plate as a template, place it on the mounting surface, and mark the four slot locations where the universal brackets will be attached.

  3. Attach Initial Universal Brackets to Surface

    Attach two (2) universal brackets to the marked slot locations on the flat surface using suitable fasteners. Tighten these fasteners securely to ensure there is no movement during operation.

  4. Attach Remaining Universal Brackets

    Attach the remaining two (2) universal brackets to the two (2) universal brackets already mounted on the surface. Position them at the desired angle using the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten securely.

  5. Assemble Junction to Base Bracket and Base Plate

    Assemble the deadbreak junction to the base bracket assembly and base plate. Use two (2) 1/2” hex head cap screws, two (2) 1/2” split lock washers, and two (2) 1/2” hex nuts. Attach them to the center mounting holes on the bracket assembly and tighten securely.

  6. Attach Junction Assembly to Universal Brackets

    Attach the complete deadbreak junction assembly (now with base bracket and base plate) to the universal brackets mounted on the surface. Use the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Tighten securely and ensure the parking stand is in the upright position.

  7. Ground the Assembly

    The base bracket assembly and the junction’s black conductive jacket must be grounded. A grounding lug is provided on the base bracket for this purpose. Connect a grounding wire (No. 2 solid to 1/0 stranded) to this lug and ensure it is properly grounded.

  8. Prepare Operating Interfaces

    Remove all protective shipping caps from the operating interfaces. Clean each interface thoroughly and lubricate them with an ELASTIMOLD approved lubricant. DO NOT SUBSTITUTE other lubricants, as they may be harmful. If not all operating interfaces are utilized, install appropriate HV insulated caps on the unused bushings before energization. Do not use protective shipping caps for this function.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.