
ABB Installation Products J2-66-35-SV 2 Point Junction, with two 600 Amp Bushing Interfaces, 35kV, 6-1/2 inch centers. No Tilt…
UPC: 783786415069
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 2-Point Junction Unit
- 600 Amp Bushing Interfaces (2)
- 35kV Voltage Rating
- 6-1/2 inch Centers Spacing
- No Tilt Mounting Design
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | No Tilt Mounting Bracket |
Size | Overall Length 19-1/2 inches, Width 6-3/4 inches |
Special Features | 6-1/2 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 2 Points |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 17.7300 L |
Package Weight (Metric) | 8.0420 kg |

J4-6226-15
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.
J5-22222-15-TMA
5 Point Junction, with five 200 Amp Bushing Well Interfaces, 15kV, Tilt Mounting Adapter.
J6-222266-25
6 Point Junction, with four 200 Amp Bushing Well Interfaces and two 600 Amp Bushing Interfaces, 25kV, No Tilt Mounting.
J3-626-35
3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 35kV, No Tilt Mounting.
J3-222-35-TMA
3 Point Junction, with three 200 Amp Bushing Well Interfaces, 35kV, Tilt Mounting Adapter.Frequently Asked Questions
What is included in a standard junction kit?
Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.
What are the continuous current ratings?
The continuous current ratings are either 600 Amp or 200 Amp.
What types of connectors are compatible?
The junctions provide mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp.
What standards do these junctions meet?
The junctions meet ANSI/IEEE Standard 386, Latest Revision.
What are the applications for these junctions?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They can be used for sectionalizing, looping, tapping, and equipment bypass.
What are the voltage and current ratings?
The junctions are rated for 15kV, 25kV, or 35kV voltage classes. They support continuous currents of 200 Amp or 600 Amp.
What standards do these junctions meet?
The junctions meet ANSI/IEEE Standard 386, Latest Revision.
What are the voltage and current ratings?
The junctions are rated for 15kV, 25kV, or 35kV voltage classes. They support continuous currents of 200 Amp or 600 Amp.
What are the applications for these junctions?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They can be used for sectionalizing, looping, tapping, and equipment bypass.
What types of connectors are compatible?
The junctions provide mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp.
How to Install a Deadbreak Junction with Universal Mount
This guide provides step-by-step instructions for safely installing a two-, three-, or four-point deadbreak junction (e.g., J2, J3, J4 series) using the universal mount method. It covers mounting, assembly, grounding, and initial preparation for operation. Installation must be performed by competent personnel trained in high voltage electrical equipment, and all apparatus must be de-energized.
Estimated time: 45m
Tools needed:
Wrench, Wire strippers, Marking tool
Supplies needed:
Base Bracket, Base Plate, Universal Brackets, Mounting Hardware Prepack (screws, washers, nuts), Suitable fasteners (for mounting to surface, user-supplied), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, Insulated caps (for unused bushings)
- De-energize Apparatus and Mark Mounting Location
DANGER: Ensure all apparatus is de-energized before beginning installation. Determine the desired location for the junction assembly. Use the base plate as a template, place it on the mounting surface, and mark all slot locations for drilling or fastener placement.
- Mount Initial Universal Brackets to Surface
Attach two universal brackets to the marked flat surface using suitable fasteners (user-supplied). Tighten these fasteners securely to prevent any movement of the brackets during operation.
- Assemble Remaining Universal Brackets
Attach the remaining two universal brackets to the two brackets already mounted on the surface. Position them at the desired angle using the supplied hardware, which includes 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten all connections securely.
- Assemble Junction to Base Bracket and Base Plate
Assemble the deadbreak junction to the base bracket assembly and base plate. Use two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten these components securely.
- Attach Junction Assembly to Universal Brackets
Attach the fully assembled deadbreak junction to the universal brackets mounted on the surface. Use the supplied hardware, including 1/2” split lock washers, 1/2” hex nuts, and 1/2” hex head cap screws. Ensure the parking stand is in an upright position before tightening all connections securely.
- Ground the Assembly
The base bracket assembly and the junction’s black conductive jacket must be properly grounded. Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket for this purpose. Ensure a secure and reliable ground connection.
- Prepare for Operation
Remove all protective shipping caps from the operating interfaces and clean them thoroughly. Lubricate each interface with an ELASTIMOLD approved lubricant; do not substitute. If any operating interfaces are not utilized, install appropriate HV insulated caps on the unused bushings before energizing the circuit. Do not use protective shipping caps for this function.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.