
ABB Installation Products J6-222222-35 6 Point Junction, with six 200 Amp Bushing Well Interfaces, 35kV, No Tilt Mounting.
UPC: 783786423248
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Six 200 Amp bushing well interfaces rated for 35kV operation
- Fully shielded, fully submersible molded rubber housing with 100% peroxide-cured EPDM construction
- 304 stainless steel brackets for corrosion resistance in harsh environments
- Meets ANSI/IEEE Standard 386 with 150kV BIL impulse withstand rating
- No-tilt mounting configuration for simplified installation in confined spaces
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Connection Type | Bushing Well |
Current Rating | 200 A |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | No Tilt Mounting Bracket |
Mounting Type | No Tilt Mounting |
Poles | 6 |
Size | Overall Length 31 inches, Width 6-3/4 inches |
Special Features | 4 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 6 Points |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 29.0700 L |
Package Weight (Metric) | 13.1860 kg |

J4-2266-35-N
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interfaces, 35kV, No Parking Stand.
J5-22222-15-TMA
5 Point Junction, with five 200 Amp Bushing Well Interfaces, 15kV, Tilt Mounting Adapter.
J6-222266-25
6 Point Junction, with four 200 Amp Bushing Well Interfaces and two 600 Amp Bushing Interfaces, 25kV, No Tilt Mounting.
J3-626-35
3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 35kV, No Tilt Mounting.
J3-222-35-TMA
3 Point Junction, with three 200 Amp Bushing Well Interfaces, 35kV, Tilt Mounting Adapter.
J5-26662-15
5 Point Junction, with one 200 Amp Bushing Well Interfaces, three 600 Amp Bushing Interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.Frequently Asked Questions
What industry standards does the product meet?
The product meets ANSI/IEEE Standard 386, Latest Revision.
What items are included in a junction kit?
Each kit contains the basic molded junction, mounting hardware, lubricant tube, installation instructions, and a protective cap.
How many connection points can the junction have?
The junctions are available with 2, 3, 4, 5, or 6 connection points.
What interface spacing options are available?
Units feature modular design flexibility, allowing selection of 200A deepwell or 600A bushing interfaces with either 4 in or 6.5 in spacing.
What connectors are compatible with this junction?
The junction provides mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp series.
What are the continuous current ratings?
The junctions are rated for either 600 Amp continuous or 200 Amp continuous operation.
What is the maximum operating voltage for the 25kV class?
For the 25kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV.
Where can these junctions be installed?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They can be used for sectionalizing, looping, tapping, and equipment bypass.
What is the JX-XXXXXX-XX product?
It is a 15/25/35kV, 200/600 Amp Molded Multipoint Junction. It features a fully shielded, submersible molded rubber housing.
What is the JX-XXXXXX-XX product?
It is a 15/25/35kV, 200/600 Amp Molded Multipoint Junction. It features a fully shielded, submersible molded rubber housing.
How to Install a Deadbreak Junction (J6-222222-35)
This guide provides instructions for safely installing and grounding a J6-222222-35 deadbreak junction using the universal mount method, designed for sectionalizing, looping, tapping, or apparatus change out in high voltage electrical systems.
Tools needed:
Wrench set (for 3/8" and 1/2" hex head screws and nuts), Wire strippers, Torque wrench
Supplies needed:
J6-222222-35 Deadbreak Junction, Base Plate, Base Bracket, Universal Brackets (4), Mounting Hardware Prepack (includes 3/8" and 1/2" hex head cap screws, lock washers, hex nuts), Suitable fasteners (for attaching universal brackets to mounting surface, supplied by user), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps or connectors (for unused bushings)
- Ensure Safety and Inspect Parts
DANGER: All apparatus must be de-energized during installation or removal of parts. For loadbreak products, follow operating instructions. All deadbreak connectors must be de-energized before operating. Do not touch or move energized products. Inspect all parts for damage, rating, and compatibility with mating parts. This product should only be installed by competent personnel trained in good safety practices involving high voltage electrical equipment.
- Determine Mounting Location and Mark Slots
Determine the desired location for the junction assembly. Using the base plate as a template, place it on the surface where the junction is to be mounted and mark all slot locations.
- Attach Initial Universal Brackets
Attach two universal brackets to the flat mounting surface using suitable fasteners (supplied by the user). Tighten these fasteners securely to ensure no movement of the brackets during operation.
- Attach Remaining Universal Brackets
Attach the remaining two universal brackets to the two brackets already mounted on the surface at the desired angle. Secure them using the supplied hardware (3/8” Hex Head Cap Screw, Ext. Tooth Lock Washer, 3/8” Hex Nut). Tighten securely.
- Assemble Junction to Base Bracket and Base Plate
Assemble the deadbreak junction to the base bracket assembly and base plate. Use two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten all components securely.
- Attach Junction Assembly to Universal Brackets
Attach the complete deadbreak junction assembly (junction, base bracket, and base plate) to the universal brackets using the supplied hardware (1/2” Split Lock Washer, 1/2” Hex Nut, 1/2” Hex Head Cap Screw). Tighten securely and ensure the parking stand is in the upright position.
- Ground the Assembly
The base bracket assembly and the junction’s black conductive jacket must be properly grounded. Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket for this purpose.
- Prepare Operating Interfaces
Before energization, remove all protective shipping caps from the operating interfaces and clean them thoroughly. Lubricate each interface with an ELASTIMOLD approved lubricant; do not substitute. If all operating interfaces are not utilized, install appropriate HV insulated caps or connectors on the unused bushings before energizing the circuit. Do not use protective shipping caps for this function.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.