ABB - Installation Products HTC40L2 - H-Tap Insulating Hard Cover for C-Taps 54735, 54740, 54745, 54750, Rated 600V, 90 degrees C, Material: thermoplastic Noryl, Black
ABB - Installation Products

HTC40L2

UPC: 786210893181

Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

Overview

The ABB HTC40L2 H-Tap Insulating Hard Cover is engineered for superior protection and reliable performance in demanding industrial electrical applications. Designed specifically for use with ABB C-Taps 54735, 54740, 54745, and 54750, this hard cover ensures the integrity and safety of your electrical connections. Constructed from high-impact thermoplastic Noryl, the HTC40L2 offers exceptional durability and resistance to harsh environmental conditions. Its robust material composition provides high-impact strength, safeguarding against physical damage. This insulating cover is rated for 600V and a continuous operating temperature of 90°C, making it suitable for a wide range of power distribution and industrial wiring systems. The black finish enhances its aesthetic appeal while also contributing to its resistance to wear and environmental factors. The design incorporates molded-in flash barriers, which provide critical protection against electrical flashover, enhancing overall system safety and preventing catastrophic failures. Furthermore, the HTC40L2 features a UL 94V-0 flame rating and an oxygen index of 28, signifying its self-extinguishing and flame-retardant properties, a crucial safety feature in electrical enclosures. Installation is made straightforward with dual self-latching, spring-loaded latches that ensure a secure fit. The cover also includes two Panduit UL 94V-0 cable ties for added security during assembly. Its low-profile design minimizes space requirements within electrical panels and enclosures. Each half of the cover includes internal plastic retainer strips designed to hold installation information labels, allowing for easy viewing from either side and protecting the labels from removal. Flexible fingers at each end of the cover prevent the ingress of foreign objects while remaining ductile enough to prevent damage to conductor insulation during installation. The part number, voltage rating, temperature rating, and compatible HTCT part number are molded directly into the cover for easy identification and inventory management. Trust ABB Installation Products for dependable, high-quality solutions that meet stringent industry standards.
  • Designed for ABB C-Taps 54735, 54740, 54745, 54750
  • Constructed from high-impact thermoplastic Noryl for durability
  • Rated 600V and 90°C for reliable operation in demanding environments
  • Features molded-in flash barriers for protection against electrical flashover
  • UL 94V-0 flame rating and self-extinguishing properties for enhanced safety

Specifications

Color
Black
Special Features
Interlocking insulating covers for H-type compression taps. Can also be used on C-Taps
Standard
UL E9809
Type
H-Tap Insulating Hard Cover
Voltage Rating
600 V
Package Dimensions (L x W x H)
2.75 IN x 6.25 IN x 3.62 IN
Package Dimensions (L x W x H)
6.985 cm x 15.875 cm x 9.1948 cm
Package Weight (Imperial)
0.170 L
Package Weight (Metric)
0.077 kg
Insulation Piercing Connector 750 MCM - 3/0 AWG Insulation piercing connectors are made for use with copper-copper, copper to aluminum and aluminum to aluminum applications. They are safe to use and are completely insulated, no need to strip wire. They can be installed on energized conductors with no contact at any point. No spacer required between connections. Exclusive "turbo spacer" keeps tap side open while main conductor is being tightened. Watertight and corrosion-free.

IPCS7501

Insulation Piercing Connector 750 MCM - 3/0 AWG Insulation piercing connectors are made for use with copper-copper, copper to aluminum and aluminum to aluminum applications. They are safe to use and are completely insulated, no need to strip wire. They can be installed on energized conductors with no contact at any point. No spacer required between connections. Exclusive "turbo spacer" keeps tap side open while main conductor is being tightened. Watertight and corrosion-free.
H-Tap Insulating Soft Cover for Cable Range 6 - 4/0 AWG for H-Taps 63140, 63148, Rated 600V, 90 degrees C, Material: Polypropylene, Black

HT40C

H-Tap Insulating Soft Cover for Cable Range 6 - 4/0 AWG for H-Taps 63140, 63148, Rated 600V, 90 degrees C, Material: Polypropylene, Black
H-Tap Insulating Hard Cover for H-Taps 63110, 63118, 63125, 63140, C-Taps 54720, 54725, 54730, 54755, 54760, Rated 600V, 90 degrees C, Material: thermoplastic Noryl, Black

HTC40

H-Tap Insulating Hard Cover for H-Taps 63110, 63118, 63125, 63140, C-Taps 54720, 54725, 54730, 54755, 54760, Rated 600V, 90 degrees C, Material: thermoplastic Noryl, Black
H-Tap/C-Tap Insulating Cover for C-Taps 54770, 54775, 54780, for H-Taps CHT2149, CHT2502148, CHT25147, CHT25026, Rated 600V, 105 degrees C, Gray Polyproplyene

HTCV2

H-Tap/C-Tap Insulating Cover for C-Taps 54770, 54775, 54780, for H-Taps CHT2149, CHT2502148, CHT25147, CHT25026, Rated 600V, 105 degrees C, Gray Polyproplyene
Copper C-Tap, 600V, Wire Range-Main: 10-8, Branch 10-12, Length 9/16 Inch, Height 7/16, Inch, Tin Plated, Die Code 24, Die Color Code Blue

54710TP

Copper C-Tap, 600V, Wire Range-Main: 10-8, Branch 10-12, Length 9/16 Inch, Height 7/16, Inch, Tin Plated, Die Code 24, Die Color Code Blue
H-Tap Insulating Soft Cover for Cable Range 1/0 - 750 MCM for H-Taps 63180, Rated 600V, 90 degrees C, Material: Polypropylene, Black

HT1000C

H-Tap Insulating Soft Cover for Cable Range 1/0 - 750 MCM for H-Taps 63180, Rated 600V, 90 degrees C, Material: Polypropylene, Black
H-Tap Insulating Hard Cover, Rated 600V, 90 degrees C, Material: thermoplastic Noryl, Black

HTC2S

H-Tap Insulating Hard Cover, Rated 600V, 90 degrees C, Material: thermoplastic Noryl, Black
E-Z-Ground C-Taps Copper Compression Connector for Cable Range #1 Str. - 2/0 Str., Tap #6 Sol. - #2 Str.

CTP202

E-Z-Ground C-Taps Copper Compression Connector for Cable Range #1 Str. - 2/0 Str., Tap #6 Sol. - #2 Str.

How to Install the HTC40L2 Controller

This guide provides step-by-step instructions for mounting, wiring, and configuring the HTC40L2 Controller.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors

  1. Mount the controller

    Secure the HTC40L2 controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.

  2. Connect the wiring

    Use terminal connectors to connect the power and signal wires to the appropriate terminals on the HTC40L2. Ensure all connections are tight and secure.

  3. Verify connections

    Use a multimeter to check the voltage at the terminals to ensure proper power supply. Confirm that all connections are correct and secure.

  4. Configure the controller

    Follow the manufacturer's instructions to program the HTC40L2 settings according to your application requirements. Adjust parameters as necessary.

  5. Calibrate the controller

    Perform calibration procedures as outlined in the user manual to ensure accurate operation of the HTC40L2. Test functionality after calibration.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.