
ABB Installation Products FTT 22-175-15CUAWR Flood Seal, Tin Plated Copper, PVC Coated, 175 Series Clamp-On Style Transformer and…
UPC: 075114423021
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 175 Ampere current rating for robust power handling.
- Tin-plated copper construction with PVC coating for corrosion resistance.
- Clamp-on style for easy installation on transformer/network towers.
- Four outlets with insulating rockets and black plugs for secure connections.
- Includes all necessary stainless steel mounting hardware and sealing gasket.
Specifications
Application | Convenient multi-tap connections to power transformers and network protectors |
Color | Black |
Conductor Range | up to 1000 kcmil |
Connection | Mechanical |
Finish | PVC Coated;TIn Plated |
Material | Copper |
Size | 9-3/8 inch Tall x 4-3/4 inch Wide |
Special Features | Vertical Cable Leads. Compact design conserves vault and manhole space and often eliminates the need for auxiliary buses. Clamp Style base provides 3-1/4 inch of stud contact and eliminates the need for a jam nut. Rubber gasket ensures closure between connector halves |
Type | Vertical Clamp-On Style Connector |
Width | 4-3/4 in |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 36.0000 L |
Package Weight (Metric) | 16.3300 kg |

FXL 66-175 CU
Tin Plated Copper Flood Seal Connector with EPDM Rubber Coating on main body, 12-1/4 inch High x 2-1/4 inch thick x 21-3/4 inch Long. Total Outlets 12, 6 on each side.
EZB-4350-SLC
Aluminum, Universal Quick-Disconnect Transformer Connector, Cable Range #12 AWG to 350 kcmil, Street Light Cable Range #14 to #2 AWG. Length 6-3/4 inch x 1-3/8 inch x 1-5/8 inch, 4 Wire Ports With Streetlight, Oxide Inhibitor Compound and Cap, includes Tin Plated Aluminum Screws. Stud Sizes 5/8 and 1 inch.
FTN500-55-6NTNIPSS
Aluminum Flood Seal Transformer Connector, (10) #2-500 MCM Cable Outlets, Black PVC Insulated Base/Pad has Six-Hole Nema Pad with Plugs and Tethers. Comes with (10) Flood Seal Insulating Sleeves/Rockets. Includes Grease and Hardware - Screws, Washers (Flat and Belleville). Dimensions (not counting Rockets) 12-7/8 inch tall x 10-5/8 inch wide x 4-1/8 inch deep. Pad is 4 inch wide x 6 inch tall.
Z-4045-U-2-SLC
Zeebar Aluminum Transformer Connector with Two Street Light Options for Wire Size #14 to #2 AWG, Eight Outlets for Wire Size #6 - 500 kcmil, Aluminum and Copper, Accepts Stud 5/8 inch or 1 inch, Eight Connector, Length 7-9/32 inch, Height 2-27/32 inch, Width 2-3/16 inch. Pre-Filled with Oxide Inhibitor and Capped. Hardware Includes (8) 3/4-16 UNF-2B Screws, (3) 11/16-16 UNS-2B Screws, (2) 9/16-18 UNF-2B Screws.
ZBT-3037-DSC
Aluminum Transformer Spade Connector - Cable Range 1/0 AWG - 750 kcmil, Width 4-5/16 Inch, Overall Length 8-3/8 inch, Depth 3-5/8 inch, Pad Thickness 5/8 inch, 4 Mounting Holes with 2 Slots, 6 Outlets, Double Row Mounting Holes, Two Set-Screws per Outlet. Oxide Inhibiting Grease Compound included. 4-Hole with 2 Center Slots Pad with (4) 9/16 inch Diameter holes and (2) 9/16 inch Center Slots on 2-3/8 inch Centers along Length of Pad. Includes (12) 7/8-14 UNF-2B Screws.
FSN-99-AWR
Aluminum Flood-Seal 125 Series Connectors - two-way configuration, two-bolt design with 1.75 inch Center to Center spacing, length 16-3/8 inch, Width 3.125 inch. Total Outlets 18 with 9 per Side, PVC Coating. Includes 36 Screws - 1/2-13 x 1 inch. Assembled with Rockets - Black EPDM Rubber
ZBT-2027-DSC
Aluminum Transformer Spade Connector - Cable Range 1/0 AWG - 750 kcmil, Width 3 Inch, Overall Length 8-3/8 inch, Depth 3-5/8 inch, Pad Thickness 5/8 inch, 4 Mounting Holes, 4 Outlets, Double Row Mounting Holes, Two Set-Screws per Outlet. Grease Compound included. 4-Hole Pad with 9/16 inch Diameter holes on 1-3/4 inch Centers. Includes 8 7/8-14 UNF-2B Screws.
ZBT-1013-TNC
Tin Plated Aluminum Transformer Spade Connector - Cable Range 12-350 kcmil, Length .962 Inch, 6 Mounting Holes, 2 Outlets. Includes GreaseHow to Install FTT Split Base Series Connectors
This guide provides step-by-step instructions for installing FTT 1 1/2” and 3” Split Base Series connectors, including mounting, wiring, and torquing procedures. Danger of Electric Shock! Installation must be performed by trained installers in accordance with all applicable local, state, and national electrical codes and safety rules.
Estimated time: 45m
Tools needed:
Torque wrench, Wrench/Socket set
Supplies needed:
FS 1175 Flood Seal Covers, 1/2-13 Mounting bolts, Cables
- Install Flood Seal Covers on Cables
Install the FS 1175 “FLOOD SEAL”® covers onto the cables prior to crimping the connectors. This ensures they are in place for the final sealing step.
- Remove Rubber Pull Tab Plugs
Remove the rubber pull tab plugs from the connector. These plugs protect the internal components during shipping and are not needed for installation.
- Loosen Stud Mounting Bolts
Loosen the stud mounting bolts and open the connector as far as possible without fully disengaging the threads. This prepares the connector for placement over the stud.
- Position Connector Over Stud
Carefully place the connector over the transformer stud, ensuring maximum thread engagement. Exercise caution to avoid any damage to the stud threads during this process.
- Engage First Connector Half
Push the connector half that contains the mounting bolt threads onto the stud threads. Be careful to ensure full and proper thread engagement before proceeding.
- Engage Second Connector Half and Snug
Push the remaining connector half onto the stud threads and lightly snug the mounting bolts, following the specific torque sequence shown in Figure 2 of the product documentation.
- Verify Engagement and Gasket Alignment
Before proceeding with further tightening, thoroughly check both the thread engagement and the gasket alignment. Proper alignment is crucial for a secure and sealed connection.
- Perform Initial Torque on Stud Bolts
Rotate the connector to its approximate final desired position. Then, torque the stud mounting bolts to 150 IN/LB, strictly adhering to the torque sequence illustrated in Figure 2.
- Install to NEMA Pads
Install the connectors to the NEMA pads using the supplied 1/2-13 bolts. Snug these bolts to hold the connector in place, but do not fully tighten them yet.
- Adjust Connector Position for Cables
As the cables are being installed, make any necessary adjustments to the connector's position to ensure proper alignment and fit with the cables.
- Perform Final Stud Bolt Torque
After all cables are installed and snugged, resume torquing the stud mounting bolts. First, tighten to 250 IN/LB, and then to 360 IN/LB, always using the sequence shown in Figure 2.
- Recheck Stud Bolt Torque
Recheck the torque of each stud mounting bolt in the specified sequence. This step ensures that all bolts maintain the correct tightness after the previous torquing stages.
- Final Torque and Seal Connections
Finish torquing the connector mounting bolts to 480 IN/LB (40 FT/LB). Immediately after, slide the pre-installed FS 1175 Flood Seals onto the FTT 175 to completely seal each connection.
- Reinstall Rubber Pull Tab Plugs
Reinstall the rubber pull tab plugs into their original positions. These plugs provide additional protection and complete the installation.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.