Authorized ABB Distributor (Installation Products)
ABB - Installation Products FTH 33-175-15 - Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 11-7/8 inch stud size 1-1/2 in, outlets 6

ABB Installation Products FTH 33-175-15 Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors…

UPC: 783786726486


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 3

Multiplier: 3

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

ABB FTH 33-175-15 Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors provide reliable cable termination for medium-voltage applications. Designed for horizontal cable leads, these connectors feature an 11-7/8 inch height and a 1-1/2 inch stud size, ensuring compatibility with standard transformer and network protection systems. The clamp-on style design simplifies installation by eliminating the need for soldering or crimping, reducing labor time and potential errors. With 6 outlets, the FTH 33-175-15 supports multiple cable connections, making it suitable for distribution transformers, switchgear, and other industrial electrical systems where secure, leak-proof terminations are critical. Manufactured by ABB Installation Products, this connector meets industry standards for electrical performance and environmental resistance. Ideal for utility, renewable energy, and industrial applications, this connector delivers consistent performance with minimal maintenance.
  • Clamp-on style design for quick, tool-free installation
  • 11-7/8 inch height and 1-1/2 inch stud size for standard compatibility
  • 6 outlets for multi-cable connections in transformer and network systems
  • Manufactured by ABB Installation Products for industrial reliability

Specifications

Application
Convenient multi-tap connections to power transformers and network protectors
Conductor Range
up to 1000 kcmil
Connection
Mechanical
Connection Type
Clamp-On Style
Insulation
PVC
Material
Aluminum Connector
Number of Conductors
6
Poles
6
Series
175 Series
Size
11-7/8 inch
Size
Height: 11-7/8 inch, Stud: 1-1/2 inch
Special Features
Horizontal Cable Leads. Compact design conserves vault and manhole space and often eliminates the need for auxiliary buses. Clamp Style base provides 3-1/4 inch of stud contact and eliminates the need for a jam nut. Rubber gasket ensures closure between connector halves
Type
Horizontal Clamp-On Style Connector
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
17.5000 L
Package Weight (Metric)
7.9380 kg
Tin Plated 175 Series Clamp-On Style Transformer and Network Protection Connectors - vertical cable leads, stud size 1/2 inch, outlets 10, with Complete Assembly with Insulating Rockets

FTT 55-175-15 TNAWR

Tin Plated 175 Series Clamp-On Style Transformer and Network Protection Connectors - vertical cable leads, stud size 1/2 inch, outlets 10, with Complete Assembly with Insulating Rockets
Aluminum Flood-Seal 175 Series connectors - two-way configuration, length 18 in , outlets 12

FS 66-175

Aluminum Flood-Seal 175 Series connectors - two-way configuration, length 18 in , outlets 12
Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 9-3/8 inch stud size 1-1/2 in, outlets 4

FTH 22-175-15

Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 9-3/8 inch stud size 1-1/2 in, outlets 4
Aluminum Transformer Connector-CSW Series - quick disconnect, cable range 12-350, stud size 1 in, insulator length 5-1/16 in, outlets 6

CSW 6350-1

Aluminum Transformer Connector-CSW Series - quick disconnect, cable range 12-350, stud size 1 in, insulator length 5-1/16 in, outlets 6
Tin-Plated Copper Flood-Seal 175 Series connectors - two-way configuration, length 18 inch, Height 12-1/4 inch, outlets 12

FS 66-175 CU

Tin-Plated Copper Flood-Seal 175 Series connectors - two-way configuration, length 18 inch, Height 12-1/4 inch, outlets 12
Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 11-7/8 inch stud size 3 in, outlets 6

FTH 33-175-30

Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 11-7/8 inch stud size 3 in, outlets 6
Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 14-3/8 inch stud size 1-1/2 in, outlets 8

FTH 44-175-15

Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 14-3/8 inch stud size 1-1/2 in, outlets 8
Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 14-3/8 inch stud size 3 in, outlets 8

FTH 44-175-30

Flood-Seal 175 Series Clamp-On Style Transformer and Network Protection Connectors - horizontal cable leads, height 14-3/8 inch stud size 3 in, outlets 8

How to Install FTH 1-1/2" and 3" Split Base Series Connectors

This guide provides detailed instructions for installing FTH 1-1/2" and 3" Split Base Series connectors, including preparing the cable, mounting the connector to a transformer stud, and torquing bolts.

Estimated time: 45m

Tools needed:

Torque wrench, Socket wrench, Hex key set (for socket head cap screws)

Supplies needed:

FS 1175 Flood Seal Covers, Rubber pull tab plugs, 1/2-13 Connector mounting hardware (supplied)

  1. Prepare Cables with Flood Seal Covers and Observe Safety

    WARNING: Danger of Electric Shock! Installation of this product must be performed by trained installers in accordance with all applicable local, state and national electrical codes, installation standards and safety rules. Install the FS 1175 “FLOOD SEAL”® covers onto the cables prior to crimping the connectors. This ensures they are in place for the final sealing step.

  2. Remove Rubber Plugs

    Carefully remove the rubber pull tab plugs from the connector.

  3. Loosen Stud Mounting Bolts

    Loosen the stud mounting bolts and open the connector as wide as possible, taking care not to fully disengage the threads.

  4. Position Connector on Stud

    Carefully place the connector over the 3”-12 UN transformer stud, ensuring maximum thread engagement and avoiding any damage to the stud threads.

  5. Engage First Connector Half

    Push the connector half that contains the mounting bolt threads onto the transformer stud threads. Verify full thread engagement.

  6. Engage Second Connector Half and Snug Bolts

    Push the remaining connector half onto the stud threads. Lightly snug the mounting bolts, following the torque sequence illustrated in Figure 2 (refer to original documentation).

  7. Verify Engagement and Gasket Alignment

    Before proceeding, thoroughly check that the threads are fully engaged and the split base gasket is correctly aligned.

  8. Initial Torque of Stud Bolts

    Rotate the connector to its approximate final position. Torque the stud mounting bolts to 150 IN/LB, strictly following the sequence shown in Figure 2 (refer to original documentation).

  9. Install to NEMA Pads

    Install the connectors to the NEMA pads using the supplied 1/2-13 bolts. Snug these bolts lightly.

  10. Adjust Connector Position

    As cables are installed into the connector, make any necessary adjustments to the connector's position to ensure proper alignment.

  11. Final Torque of Stud Bolts

    Once all cables are installed and snugged, resume torquing the stud mounting bolts. First, torque them to 250 IN/LB, then proceed to 360 IN/LB, always following the sequence depicted in Figure 2 (refer to original documentation).

  12. Recheck Stud Bolt Torque

    Recheck the torque of each stud mounting bolt, ensuring they are all at 360 IN/LB and following the specified sequence.

  13. Torque NEMA Pad Bolts and Seal Connections

    Finish torquing the connector mounting bolts (to the NEMA pads) to 480 IN/LB (40 FT/LB). Then, slide the pre-installed FS 1175 Flood Seals onto the FTH 175 to completely seal each connection.

  14. Reinstall Rubber Plugs

    Reinstall the rubber pull tab plugs into their original positions.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.