
ABB Installation Products 756LR-H0240-S 35kV 600 Series Deadbreak Elbow with Test Point (with Insulated Plug, Cap, Stud, Lug and…
UPC: 075114190671
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Fully rated 35kV, 600 Amp Deadbreak Elbow Connector
- Fully shielded, fully submersible molded rubber housing
- 100% peroxide-cured EPDM construction
- Accommodates 0.850" to 1.050" cable insulation diameter
- Supports 1/0 AWG/kcmil (compressed stranded) or 2/0 AWG (compacted solid) conductors
- Fully shielded, submersible molded rubber housing
- Includes insulated plug, cap, stud, aluminum compression lug, and cable adapter
Specifications
Amperage Rating | 600 A |
Application | 35 kv, 600 Amp |
Color | Black |
Conductor Range | 1/0 STR/COMPR AWG , 2/0 SOL/COMPT AWG |
Connection | Compression |
Connection Type | Compression Lug |
Current Rating | 600 A |
Environmental Conditions | Fully Submersible |
Insulation | True |
Material | Aluminum |
Material | Housing - EPDM-Rubber |
Series | 600 Series |
Size | 0.850-1.050 inch (cable insulation diameter), 1/0-2/0 AWG/kcmil (conductor size) |
Special Features | 35kV, 600 Amp Loadbreak Elbow. Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Can be easily connected or disconnected using standard hand tools and equipment in a de-energized state. S - Cold-Shrinkable Jacket Seal |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Deadbreak Elbow Connector with Test Point |
Voltage Rating | 35 kV |
Width | 12.28 in |
Width | 311.912 mm |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

376LR-J5240-S
35kV 200 Amp, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter 0.980 inch to 1.180 inch. Bi-Metal Compression Lug. Conductor Size AWG Compressed Stranded 1/0 /Solid 2/0 /mmSquared 53.49. 200ECS Jacket Seal Included.
776LR-Q2440-S
900 Amp, 35kV, 600 Series Elbow with Test Point, with Insulated Plug, Cap, Stud, Lug and Cable Adapter. Cable Insulation Diameter 1.900 inch to 2.120 inch. Copper Compression Lug. Conductor Size Compressed Stranded 1250 kcmil. Cold-Shrinkable Jacket Seal Included.
756LR-H0270-S
35kV 600 Series Deadbreak Elbow with Test Point (with Insulated Plug, Cap, Stud, Lug and Cable Adapter). Aluminum Compression Lug. Cable Insulation Diameter 0.850 inch to 1.050 inch. Conductor Size AWG or kcmil, Compressed Stranded 4/0 /Compacted Solid 250 /mmSquared Compact 125. Cold-Shrinkable Jacket Seal Included.
756LR-Q0410
600 Amp, 35KV, DeadBreak, Elbow with Test Point, with Insulated Plug, Cap, Stud, Lug and Cable Adapter, Cable Insulation Diameter 1.900 inch to 2.120 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1000.
K465LR-G-2230
15/25kV, 630 Amps, Deadbreak Elbow without Test Point. Cable Insulation Diameter 0.760-0.950 inches (19.304-24.130mm). Copper Compression Lug, Conductor Size #1 Stranded/Compressed or 1/0 Solid/Compact or 50 mm2. Includes Elbow Connector Housing, Compression Lug, Stud, Insulated Plug with Cap, Tube Lubricant, Cable Adapter, Installation Instructions and Crimp Chart. Exceeds ANSI/IEEE Standard 386 Latest Revision.
K465LR-H0250
15/25kV, 630 Amps, Deadbreak Elbow without Test Point. Cable Insulation Diameter 0.850-1.050 inches (21.590-26.670mm). Aluminum Compression Lug, Conductor Size 2/0 Stranded/Compressed or 3/0 Solid/Compact or 70 mm2. Includes Elbow Connector Housing, Compression Lug, Stud, Insulated Plug with Cap, Tube Lubricant, Cable Adapter, Installation Instructions and Crimp Chart. Exceeds ANSI/IEEE Standard 386 Latest Revision.
K465LR-K-2330-S
15/25kV, 630 Amps, Deadbreak Elbow without Test Point. With Cold-Shrinkable Jacket Seal. Cable Insulation Diameter 1.090 inch to 1.310 inch (27.686-33.274mm). Copper Compression Lug, Conductor Size 500 Stranded/Compressed or 600 Solid/Compact or 250/300 mm2. Includes Elbow Connector Housing, Compression Lug, Stud, Insulated Plug with Cap, Tube Lubricant, Cable Adapter, Installation Instructions and Crimp Chart. Exceeds ANSI/IEEE Standard 386 Latest Revision.
K465LR-J-2290-S
15/25kV, 630 Amps, Deadbreak Elbow without Test Point. With Cold-Shrinkable Jacket Seal. Cable Insulation Diameter 0.980 inch to 1.180 inch (24.892-29.972mm). Copper Compression Lug, Conductor Size 300 Stranded/Compressed or 350 Solid/Compact or 150 mm2. Includes Elbow Connector Housing, Compression Lug, Stud, Insulated Plug with Cap, Tube Lubricant, Cable Adapter, Installation Instructions and Crimp Chart. Exceeds ANSI/IEEE Standard 386 Latest Revision.Frequently Asked Questions
What is the primary application of the 756LR elbow?
The 756LR elbow provides fully shielded, dead-front submersible cable connections to high-voltage apparatus.
What is the maximum phase-to-ground operating voltage?
The maximum phase-to-ground operating voltage for the 35kV class is 21.1kV.
Is the 756LR elbow submersible?
Yes, the 756LR elbow features a fully shielded, fully submersible molded rubber housing.
What standard does the 756LR elbow meet?
The 756LR elbow meets ANSI/IEEE Standard 386, Latest Revision.
What is the impulse withstand rating (BIL)?
The impulse withstand (BIL) rating for the elbow is 150kV.
What is the continuous current rating of the 756LR?
The 756LR elbow has a continuous current rating of 600 Amps.
What is the acceptable cable insulation diameter range?
The acceptable insulation diameter range for cables is from 0.760 inches to 2.120 inches.
What conductor types and sizes are compatible?
It is compatible with #2 AWG to 1250 kcmil aluminum and copper conductors.
What is the maximum voltage class for the 756LR elbow?
The 756LR elbow is designed for use through 35kV voltage class applications.
What materials are used in the elbow's construction?
The elbow features 100% peroxide-cured construction, including insulation and conductive EPDM materials.
How to Install 756LR Deadbreak Elbow Connectors
This guide provides step-by-step instructions for the safe and proper installation of 756LR Deadbreak Elbow Connectors, designed for fully shielded, submersible cable connections on 35kV class systems.
Estimated time: 1h 30m
Tools needed:
Wire strippers, Crimping tool, Wire brush, Hotstick, Suitable voltage sensing device, Torque wrench, Cleaning cloths
Supplies needed:
756LR Deadbreak Elbow Connector kit, Cable (35kV class), Grounding wire (No. 14 AWG Copper or equivalent), Suitable ground connector, Waterproofing material, Silicone lubricant
- Safety First: De-energize and Inspect
DANGER: Ensure all apparatus is de-energized before beginning installation. Verify the 756LR connector kit contents are complete, undamaged, and compatible with your cable and mating products.
- Prepare the Cable
Position the cable with adequate slack and cut it 1-3/4” (45mm) from the mating product's centerline. Clean 24” (610mm) of the outer jacket. Prepare the cable by removing the outer jacket (if applicable), insulation, and semi-con shield according to cable type and specified dimensions. Bevel the cable insulation end at 45 degrees, clean, lubricate, and install the cable adapter flush with the tape marker. Trim protruding insulation even with the cable adapter, ensuring 4-3/8” to 4-3/4” (111mm-121mm) of bare conductor is exposed.
- Crimp the Compression Lug
For copper conductors, fully insert the conductor into the compression lug. For aluminum, wire brush the conductor immediately before full insertion. Measure the 'Check Dimension' (must be less than 7”/178mm). Crimp the lug according to its instructions, then wipe off excess inhibitor. Verify the distance from the lug end to the cable adapter is 6-7/8” to 7-5/8” (175mm-194mm).
- Install the Elbow
Lubricate the cable adapter and the inside of the elbow's cable entrance. Install the elbow onto the cable adapter until it cannot advance further, ensuring the cable adapter remains flush with the tape marker. Remove the tape marker.
- Connect to Mating Apparatus
DANGER: Do not connect or disconnect mating products while energized. Remove protective caps from the elbow and the mating part. Hand tighten the supplied threaded stud into the mating part if needed. Clean and lubricate both the elbow and the mating part. Push the elbow onto the mating part, aligning the compression lug hole with the stud. Clean and lubricate the mating part for the opposite end of the elbow, insert it, engage threads, hand tighten, and then torque according to the mating part's instructions.
- Install Insulating Plug and Ground Cable Shield
If using an insulating plug, clean and lubricate its voltage detection cap and push it onto the elbow until it snaps into place. Insert a No. 14 AWG Copper (or equivalent) grounding wire through the grounding eye, twist to form a loop, and connect it to ground using a suitable connector. Ensure the cable shield is grounded as per grounding device instructions or an alternate method. Waterproof the cable jacket to prevent moisture ingress.
- Perform Voltage Test
CAUTION: Ensure all 600amp L-Kit components are tightened to specified torque. Remove the test point cap with a hotstick, peeling it off at an angle. WARNING: Use a suitable sensing device designed for capacitive test points to determine if the cable is energized; do not use conventional voltage measuring equipment. Treat the elbow as energized until a 'no voltage' indication is confirmed by other means. After testing, clean and lubricate the cap with silicone lubricant and replace it on the test point.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.