Showing 2581-2592 of 452,163 results

ABB - Installation Products · TY-DUCT
TYD15X3WPG6
Wiring Duct Wide Slot, 1.5 Inches x 3 Inches, Gray PVC
Contact for Pricing
Minimum Qty: 120
Multiplier: 120
*Contact for lower quantities*

Contact for Pricing

ABB - Installation Products · STEEL CITY
MBP
Masonry Box Partition, 3-3/4 Inches Wide x 3-1/2 Inches Deep, Galvanized Steel, Low Voltage, Drilled and Tapped for Mounting, Furnished with Two 8/32 Screws
Contact for Pricing

DRIVE CFW500D24P0T4DB20G2 WEG specifications: Power supply 380-480 V; Input phases Three-phase; Configuration With options; Rated current (HD) 24 A; RFI filter Without filter; Enclosure IP20; Dynamic braking Standard with braking; Safety Stop Prepared to install the accessory CFW500-SFY2
Contact for Pricing

The RDCO-02 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 5 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.
Contact for Pricing

Braking Resistor, 3.6 OHMS, 17640 WATTS, GCE24 Enclosure, 28W x 13D x 10H in, 82 lbs
Contact for Pricing

125VAC rated GGU fuses have midget fuse dimensions (1-1/2" x 13/32"). 20A and above have ceramic bodies, allowing use in higher ambient temperature conditions than other similar fuses. (Not for Branch Circuit Protection). 125 Volts 4 Amps .
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

250V Time Delay, Ceramic 1/4" x 1 1/4" 250 Volts 0.5 Amps GSA-V series.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Amp-Trap 2000 time-delay AJT fuses provide IEC Type "2" (No Damage) protection to main, feeder, and branch-circuits, for all types of loads - yet, they require only half the mounting space needed for 600V UL Class RK fuses. Time-delay characteristics handle motor in-rush currents without nuisance trips. Its current-limiting ability and wide range of ratings provide excellent overcurrent protection for all your applications. An optional mechanical blown fuse indicator and Microswitch is available on blade-type (70 to 600A) fuses for visual and/or remote blown fuse indication. 600 Volts 4 amps .
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*