Showing 877-888 of 10,147 results

Fast-acting, high-interrupting capacity, current-limiting type fuse. Especially suited for control circuits, street lighting, H.I.D. lighting, computers, and other applications without high inrush currents.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

ACS 3AG OMNI-BLOK SLDR TERM 11 POLE MTG. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The unique design permits self-alignment of clips to fuse cap. This, plus a one-piece clip/terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips. With the exception of the two-pole unit, multiple pole units may be broken apart to obtain desired number of poles.
Contact for Pricing

Littelfuse · 481 Series
0481012.HXLP
125V ALARM FUSE W/LENS H-PACK 12A. Color-coded indicator flags indicate ampere rating. Body is constructed of black polyphenylene sulfide with UL-94V0 flammability rating, contacts are of bright alloy-plated beryllium copper. Ideal for telecommunications and control panel circuits.Eliminates down time by immediately pinpointing the blown (open) circuit while triggering LED or audio alarm, while placed in mating holder (482 Series). Clear plastic lens option available for additional safety.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Used as in-line protection for fluorescent fixtures, the Littelfuse LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. On a 277 volt system, a fault occurring in an un-fused fixture could take out the entire branch circuit affecting up to 100 fixtures. This could cause safety problems as well as shut down operations. By individually fusing fixtures, these problems will be avoided. The added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. Fuse holders are rated up to 10 amperes at 300 volts and are equipped with 7” 18 AWG leads. Order part number LHR 000 for two leads, and part number LHR 001 for one lead and one terminal for insertion of 18 AWG ballast lead.
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

Littelfuse · JLLS Series
JLLS010.TXV
UL CLASS T FAST ACTING T-PACK 10A. Space-saving Class T fuses are the most compact fuses available in ratings above 30 amperes — less than one-third the size of comparable Class R fuses. When rated in accordance with the NEC, Class T fuses provide fast-acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of Class T fuses must be increased to prevent opening on inrush currents. In such instances, Class T fuses may provide only short circuit protection.For motor and general purpose circuits where space is not critical, we recommend POWR-PRO™ JTD_ID Indicator series, LLNRK/LLSRK series, or FLSR_ID Indicator series. Applications: Protection of individual electric services and meters. Main switches containing Class T fuses may be used to provide compact protection for meter stacks. Molded case circuit breaker load centers and panelboards have increased interrupting ratings when “series rated” with Littelfuse Class T fuses. Refer to panelboard manufacturers’ literature for UL Listed combination of fuses and panelboards. Series ratings up to 200,000 amperes are available. Space Saving: Typical three-pole Class T fuse blocks require less than 50percent of the panel area required for Class R fuse blocks. Switch enclosures, fuse pullouts, and other equipment using Class T fuses are often correspondingly more compact. Safety: 200,000 A.I.R. — Reliable interruption of all overcurrents up to 200,000 amperes. Extremely current limiting — Stops damaging short circuit current faster than any mechanical protective device. Fast-Acting — Provides fast-acting overload protection to equipment such as variable speed drives, rectifiers and other equipment containing surge-sensitive components. Longer Equipment Life: Current limiting design greatly reduces damage to equipment caused by heating and magnetic effects of short circuit currents. Economical: Extremely current limiting design often permits use of readily available, less costly equipment. Used as input or output fuses for surge-sensitive components, such as variable speed drives and rectifiers, fast-acting Class T JLLS fuses may prevent opening of expensive semiconductor fuses protecting individual components.
Contact for Pricing

The L15S series is a traditional North American Bolted style high-speed fuse for protection of power semiconductor devices that are rated up to 150 V ac and up to 150 V dc Littelfuse POWR-SPEED ® products offer optimized circuit protection at the extremely fast speed required to protect power semiconductor devices such as silicon controlled rectifiers (SCR’s), diodes, thyristors, triacs, transistors, and similar solid-state devices. These devices are used in power equipment including variable speed drives, power rectifiers, UPS systems, dc power supplies, and in a wide range of electronic equipment. May be used wherever extremely fastacting, current-limiting fuses with no time delay are required.
Contact for Pricing

Perfect for use in lighting systems, this 300 VAC time delay fuse is designed to handle ballast transformer in-rush currents.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Perfect for use in lighting systems, this 300 VAC time delay fuse is designed to handle ballast transformer in-rush currents.
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

Perfect for use in lighting systems, this 300 VAC time delay fuse is designed to handle ballast transformer in-rush currents.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

KLDR025 is a Class CC fuse with an ampere rating of 25.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

CCMR.500 is a Class CC fuse with an ampere rating of 0.5.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

CCMR004 is a Class CC fuse with an ampere rating of 4.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*