Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 8689-8700 of 10,147 results

Littelfuse LFCL4/0A1 - 600 VOLT CABLE LIMITER 0A1. Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size, for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). Applications: Service entrance conductors, between transformers or network bus and busway terminal boxes, large feeders with three or more conductors per phase. Features: Current-limiting characteristics provide protection to conductor insulation and reduce damage when faults occur. Properly applied cable limiters may permit the use of equipment with reduced withstand ratings. Wide variety of terminations and cable ratings permit use in almost every situation.
Littelfuse Ā· LFCL Series

LFCL4/0A1

LFCL04/0ZA1


600 VOLT CABLE LIMITER 0A1. Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size, for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). Applications: Service entrance conductors, between transformers or network bus and busway terminal boxes, large feeders with three or more conductors per phase. Features: Current-limiting characteristics provide protection to conductor insulation and reduce damage when faults occur. Properly applied cable limiters may permit the use of equipment with reduced withstand ratings. Wide variety of terminations and cable ratings permit use in almost every situation.

Contact for Pricing

Littelfuse LFCL350A3 - 600 VOLT CABLE LIMITER 350 ALUM 3 TERM. Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size, for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). Applications: Service entrance conductors, between transformers or network bus and busway terminal boxes, large feeders with three or more conductors per phase. Features: Current-limiting characteristics provide protection to conductor insulation and reduce damage when faults occur. Properly applied cable limiters may permit the use of equipment with reduced withstand ratings. Wide variety of terminations and cable ratings permit use in almost every situation.
Littelfuse Ā· LFCL Series

LFCL350A3

LFCL0350ZA3


600 VOLT CABLE LIMITER 350 ALUM 3 TERM. Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size, for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). Applications: Service entrance conductors, between transformers or network bus and busway terminal boxes, large feeders with three or more conductors per phase. Features: Current-limiting characteristics provide protection to conductor insulation and reduce damage when faults occur. Properly applied cable limiters may permit the use of equipment with reduced withstand ratings. Wide variety of terminations and cable ratings permit use in almost every situation.

Contact for Pricing

Littelfuse FLSR1.25ID - FLSR1.25ID is a Class RK5 fuse with an ampere rating of 1.25 and cartridge-style construction.
Littelfuse Ā· FLSR Series

FLSR1.25ID

FLSR1.25TXID


FLSR1.25ID is a Class RK5 fuse with an ampere rating of 1.25 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse JTD035ID - JTD035ID is a Class J fuse with an ampere rating of 35 and cartridge-style construction.
Littelfuse Ā· JTD Series

JTD035ID

0JTD035.TXID


JTD035ID is a Class J fuse with an ampere rating of 35 and cartridge-style construction.

Contact for Pricing

Littelfuse JTD17.5ID - JTD17.5ID is a Class J fuse with an ampere rating of 17.5 and cartridge-style construction.
Littelfuse Ā· JTD Series

JTD17.5ID

0JTD17.5TXID


JTD17.5ID is a Class J fuse with an ampere rating of 17.5 and cartridge-style construction.

Contact for Pricing

Littelfuse FLSR02.8ID - FLSR02.8ID is a Class RK5 fuse with an ampere rating of 2.8 and cartridge-style construction.
Littelfuse Ā· FLSR Series

FLSR02.8ID

FLSR02.8TXID


FLSR02.8ID is a Class RK5 fuse with an ampere rating of 2.8 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse FLSR01.5ID - FLSR01.5ID is a Class RK5 fuse with an ampere rating of 1.5 and cartridge-style construction.
Littelfuse Ā· FLSR Series

FLSR01.5ID

FLSR01.5TXID


FLSR01.5ID is a Class RK5 fuse with an ampere rating of 1.5 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse 153009 - MINI PCB-MOUNT FUSE HOLDER. Designed to hold the MINIĀ® Fuse, the Printed Circuit Board Mount is an economical alternative for PCB circuit protection in a variety of applications.
Littelfuse Ā· 153 Series

153009

01530009Z


MINI PCB-MOUNT FUSE HOLDER. Designed to hold the MINIĀ® Fuse, the Printed Circuit Board Mount is an economical alternative for PCB circuit protection in a variety of applications.

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

Littelfuse 153007 - MINI PCB-MOUNT FUSE HOLDER 7A. Designed to hold the MINIĀ® Fuse, the Printed Circuit Board Mount is an economical alternative for PCB circuit protection in a variety of applications.
Littelfuse Ā· 153 Series

153007

01530007Z


MINI PCB-MOUNT FUSE HOLDER 7A. Designed to hold the MINIĀ® Fuse, the Printed Circuit Board Mount is an economical alternative for PCB circuit protection in a variety of applications.

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

Littelfuse FLSR2.25ID - FLSR2.25ID is a Class RK5 fuse with an ampere rating of 2.25 and cartridge-style construction.
Littelfuse Ā· FLSR Series

FLSR2.25ID

FLSR2.25TXID


FLSR2.25ID is a Class RK5 fuse with an ampere rating of 2.25 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse FLSR02.5ID - FLSR02.5ID is a Class RK5 fuse with an ampere rating of 2.5 and cartridge-style construction.
Littelfuse Ā· FLSR Series

FLSR02.5ID

FLSR02.5TXID


FLSR02.5ID is a Class RK5 fuse with an ampere rating of 2.5 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse FLSR01.8ID - FLSR01.8ID is a Class RK5 fuse with an ampere rating of 1.8 and cartridge-style construction.
Littelfuse Ā· FLSR Series

FLSR01.8ID

FLSR01.8TXID


FLSR01.8ID is a Class RK5 fuse with an ampere rating of 1.8 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Showing 8689-8700 of 10,147 results