Showing 4633-4644 of 10,147 results

Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Littelfuse · Relay Series
T3200.0060
Insulation Monitoring Relay. 120/127V. The Insulation Monitoring Relay T3200 is intended for continuous insulation monitoring on three phase insulated networks on board ships. The relay monitors continuously two systems galvanically separated from each other, e.g. the busbar and the lighting system, or two busbar systems. The unit features two output relays for alarm purposes and two analogue outputs for instrument reading. The instrument is not included with the relay. Instruments are available from as standard sized switchboard component.
Contact for Pricing

Littelfuse · Relay Series
T4800.0030
Load Sharer. 415/480V 5A. The T4800 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4800 units). The T4800 will continuously measure and compare the active current on the generator to an external DC reference signal connected to the “parallel lines” input. The T4800 will increase or decrease the speed of the generator (through the governor) if it finds the active current level to be either too low or two high. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller.
Contact for Pricing

Littelfuse · Relay Series
T4800.0040
Load Sharer. 100/110V 1A. The T4800 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4800 units). The T4800 will continuously measure and compare the active current on the generator to an external DC reference signal connected to the “parallel lines” input. The T4800 will increase or decrease the speed of the generator (through the governor) if it finds the active current level to be either too low or two high. Two built-in relays provide the increase and decrease pulses for a conventional governor. The strength (width) of the pulses is proportional to the frequency/phase deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for the speed trim input of an electronic speed controller.
Contact for Pricing

Littelfuse · G3000 Series
G3300.0020
Voltage Relay (3 phase). The G-Line relays are mainly intended for use in land-based applications. The G-Line relays provide an efficient solution for applications where flexibility and cost of purchase are the main issues. G-Line relays provide high quality, proper measuring techniques and a vast number of programmable options.
Contact for Pricing

Optional network-interface and firmware-upgrade communications adapter. Field installs in EL731.
Contact for Pricing

The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
Contact for Pricing

Optional network-interface and firmware-upgrade communications adapter. Field installs in EL731.
Contact for Pricing

The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
Contact for Pricing

EL731-01-00 is an earth-leakage relay with a supply voltage ac of 120–240 and a supply voltage dc of 120–240. Communications is offered via DeviceNet™.
Contact for Pricing

Littelfuse · G2000 Series
G2200.0010
G2200 Current Relay. 24V DC 5A. The G-Line relays are mainly intended for use in land-based applications. The G-Line relays provides an efficient solution for applications where flexibility and cost of purchase are the main issues. Despite a low purchase price, G-Line relays provide high quality, proper measuring techniques and a vast number of programmable options. Safety, accuracy and repeatability are important features in any protection system. G-Line relays all have built-in measuring transformers, one for each phase measurement. Transformers provide the best possible isolation with near perfect linearity and thereby no loss of accuracy. Voltages and currents can be measured through resistors or optical couplers.
Contact for Pricing