Showing 397-408 of 10,147 results

Perfect for use in lighting systems, this 300 VAC time delay fuse is designed to handle ballast transformer in-rush currents.
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

The KLKD fuse series is fast-acting with a high DC voltage rating. This family of Midget style fuses (10 x 38 mm) is used in solar combiner boxes and in circuits with DC fault currents up to 50,000 amperes. KLKD fuses are available in standard and board-mount configurations. In addition, the KLKD series has been designed to meet both the UL and IEC photovoltaic fuse standards. Littelfuse offers a wide range of ampere ratings to match specific requirements in a variety of applications.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

The SPF Solar Protection Fuse series has been specifically designed for the protection of photovoltaic (PV) systems. This family of Midget style fuses (10 x 38 mm) can safely protect PV modules and conductors from reverseovercurrent conditions. As PV systems have grown in size, so have the corresponding voltage requirements. This increase in system voltage has typically been intended to minimize power loss associated with long conductor runs. Standard circuit protection devices are not designed to completely protect photovoltaic panels. However, the SPF series is UL Listed to safely interrupt faulted circuits up to this demanding voltage level. Littelfuse offers multiple ampere ratings to match specific requirements in a variety of applications.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

FUSE PAL AUTOLINK 32V 13/16 BNT BOX 100A. PAL™ Fuses are available in current ratings up to 120 amperes, with either female or bolt-on terminals.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

FUSE AGX 8AG 125V BOX 3A. Originally stood for “all glass.” The automotive industry uses the “AG” prefix (AGC, AGW) for most glass fuses. They vary in length, diameter and amperage rating.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

Littelfuse · 218 Series
0218.800MXP
0218 SLO-BLO GLS BODY FUSE M-PACK .800A. 5x20mm Time-Lag glass body cartridge fuse designed to IEC specification. Features: Designed to International (IEC ) Standards for use globally Meets the IEC 60127-2, Sheet 3 specification for Time Lag fuses. Available in cartridge and axial lead form RoHS compliant and lead-free.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Littelfuse · 322 Series
0322012.MXP
VERY FAST-ACTING CERAMIC M-PACK 12A. The 3AB Very Fast-Acting Fuse for protection of Silicon Controlled Rectifiers and similar solid-state devices. Features: In accordance with UL Standard 248-14. Available in cartridge format only. RoHS compliant and Lead-free.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

FLSR.300 is a Class RK5 fuse with an ampere rating of 0.3 and cartridge-style construction.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

BLS.800 is a special-sized Midget fuse at 1 ⅜” long with an ampere rating of 0.8 and 600 V ac.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

PANELMOUNT SHKSAFE FSEHLDR 3AG FUSE QS7A. Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65 and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and anti-tease feature that eliminates circuit interruptionwhen knob is accidentally depressed.
Contact for Pricing

PANELMOUNT SHKSAFE FSEHLDR 2AG FUSE LF8A. Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65 and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and anti-tease feature that eliminates circuit interruptionwhen knob is accidentally depressed.
Contact for Pricing