Showing 2425-2436 of 10,147 results

Littelfuse · Relay Series
SE-MUX
GF/GC TERM MULTIPLEXER. GROUND FAULT/GROUND CHECK TERMINATION MULTIPLEXER.
Contact for Pricing

50-W ground-check termination assembly with convenient mounting holes and screw terminals.
Contact for Pricing

Littelfuse · M4200 Series
M4200.0010
Alarm Monitor. The Alarm Monitor M4200 complements our existing and wide product range of alarm monitors and indicator panels. These are used in a number of applications in power plants, ship installations and industrial processes with a demand for a high level of run-time security as well as personal safety.
Contact for Pricing

Littelfuse · M2600 Series
M2600.0010
Shut down unit. The M2600 Shut-down unit has been designed as a safety shut down device for protection of marine engines e.g. in generator, propulsion or pump applications. Together with the M2500 or M2000 or other Engine Controllers it can build up a complete Control, Alarm and Safety System for Marine Engines. However it can also be used as standalone safety device. In order to meet the restrictions of the classification societies with regards to safety functions, the unit has been designed entirely on discreet logic. There is no microprocessor or programmable electronic circuit involved. The module includes 10 shut down inputs for digital sensors. All sensor inputs are cable monitored. The speed can be detected either from a magnetic pick up or from a digital input. Shut Down outputs are available for stop and run solenoid. Both outputs are cable monitored. Additionally there are some status outputs for common alarms and shut downs.
Contact for Pricing

Littelfuse · Relay Series
SE-GRM125-A75
GROUND-REFERENCE MODULE 125/75. Connects the SE-601 relay to an ungrounded 75/125 Vdc bus.
Contact for Pricing

Contact for Pricing

The SE-CS30 series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
Contact for Pricing

Littelfuse · M1000 Series
M1000.0060
Alarm Annunciator. The M1000 is an Alarm Monitor capable of surveying the state of up to 10 potential free contacts. The inputs of the M1000 can be used to monitor both normally open (NO) and normally closed (NC) contacts. Each contact can be sourced to a positive or negative reference. The M1000 includes a total of 10 inputs. Each input controls two bright red LEDs and an open collector output. A built-in relay provides audible alarm through control of an external siren. The first incoming alarm is indicated with a quick flashing light, following alarms are indicated with slow flashing light. LEDs will keep flashing until the alarms are acknowledged, even though the input signal has been deactivated. Pressing the RESET pushbutton will acknowledge all new alarms whereby all flashing LEDs will change to steady light, provided that the related inputs are still active. Pressing the RESET push button will also silence the siren. The reset sequence is programmable.
Contact for Pricing

Contact for Pricing

Littelfuse · M4600 Series
M4600.0030
Indicator Panel. 8 channels, 12V DC/AC. The M4600 provides flush mounted LED based indication with 6, 8 or 20 channels. Each channel can be used to indicate the state of one potential free contact. The indicator units are available with either negative or positive reference. An insert paper label provides the opportunity to print a description or instruction right next to the related channel LED. The indicator units are available for both DC of AC supply. Input signals can be +24 VDC, +48 VDC or +110 VDC.
Contact for Pricing

Protects the EFCT input on the SE-701, SE-703, MPU-32, and FPU-32 when a current transformer other than the EFCT-1, EFCT-2, or EFCT-26 is used.
Contact for Pricing

Littelfuse · M4600 Series
M4600.0090
Indicator Panel, 8 channels. The M4600 provides flush mounted LED based indication with 6, 8 or 20 channels. Each channel can be used to indicate the state of one potential free contact. The indicator units are available with either negative or positive reference. An insert paper label provides the opportunity to print a description or instruction right next to the related channel LED. The indicator units are available for both DC of AC supply. Input signals can be +24 VDC, +48 VDC or +110 VDC.
Contact for Pricing