Showing 2377-2388 of 10,147 results

The SE-105/SE-107 is a combination ground-wire monitor and ground-fault relay for resistance-grounded systems. It continuously monitors the integrity of the ground conductor to protect portable equipment from hazardous voltages caused by ground faults. The SE-105/SE-107 is an excellent choice for trailing cables 5 kV and under in underground mining applications. For higher voltages or long-cable applications, see the SE-134C/SE-135.
Contact for Pricing

The SE-134C/SE-135 is a microprocessor-based, combination ground-wire monitor and ground-fault relay for resistance grounded or solidly grounded systems. It continuously monitors the integrity of the ground conductor to protect portable equipment from hazardous voltages caused by ground faults. The SE-134C/SE-135 is field proven in monitoring trailing cables on large mobile equipment such as drag-lines, mining shovels, shore-to-ship power cables, dock-side cranes, stacker-reclaimers, submersible pumps, and portable conveyors.
Contact for Pricing

The SE-105/SE-107 is a combination ground-wire monitor and ground-fault relay for resistance-grounded systems. It continuously monitors the integrity of the ground conductor to protect portable equipment from hazardous voltages caused by ground faults. The SE-105/SE-107 is an excellent choice for trailing cables 5 kV and under in underground mining applications. For higher voltages or long-cable applications, see the SE-134C/SE-135.
Contact for Pricing

SE-330AU-20-01 is an advanced neutral-earthing resistor monitor with a supply voltage ac of 28–52 and a supply voltage dc of 36–72. Network communications is offered via USB.
Contact for Pricing

SE-330AU-20-00 is an advanced neutral-earthing resistor monitor with a supply voltage ac of 28–52 and a supply voltage dc of 36–72. Network communications is offered via USB.
Contact for Pricing

The SE-105/SE-107 is a combination ground-wire monitor and ground-fault relay for resistance-grounded systems. It continuously monitors the integrity of the ground conductor to protect portable equipment from hazardous voltages caused by ground faults. The SE-105/SE-107 is an excellent choice for trailing cables 5 kV and under in underground mining applications. For higher voltages or long-cable applications, see the SE-134C/SE-135.
Contact for Pricing

SE-330AU-21-01 is an advanced neutral-earthing resistor monitor with a supply voltage ac of 28–52 and a supply voltage dc of 36–72. Network communications is offered via USB; DeviceNet.
Contact for Pricing

SE-325EN is a neutral-grounding resistor monitor with a supply voltage of 240 ac and a ground-fault trip level of 0.5–4.0 A.
Contact for Pricing

Littelfuse · Relay Series
T3300.0030
Voltage Relay. 100/110V. The T3300 is intended for three phase effective voltage surveillance on generators, busbar or other distribution systems. The relay contains the functions “under voltage” and “over voltage” time delayed, and 2 individual output relays, one relay for each function. The T3300 includes a total of four internal transformers. Three of these transformers are used for measurement and one dedicated to supplying the internal electronics. The internal transformers provide optimal isolation and the best possible accuracy. The use of a dedicated transformer for supply prevents load disturbance to any of the three measurements.
Contact for Pricing

SE-701-03 is a ground-fault monitor with a supply voltage ac of 24 and is uniquely suited for systems with significant harmonic content.
Contact for Pricing

Littelfuse · Relay Series
T4900.0040
VAr Load Sharer. 100/110V 5A. The T4900 is designed to control a generator operating in parallel with the grid, or a generator operating in parallel with other generators (which are also controlled by T4900 units). The T4900 will continuously measure and compare the reactive current on the generator to an external DC reference signal connected to the “parallel line” input. The T4900 will increase or decrease the voltage of the generator (through the AVR) if it finds the reactive current level to be either too low or too high. Two built-in relays provide the increase and decrease pulses for the automatic voltage regulator (AVR). The strength (width) of the pulses is proportional to the voltage deviation. The E7800 Motorised Potentiometer can be used to adapt the contact pulses to a signal suitable for most AVR’s.
Contact for Pricing

Littelfuse · Relay Series
T5000.0020
Paralleling Relay. 230V. The T5000 Paralleling Relay is a check synchroniser. The T5000 has two separately insulated voltage inputs, one for each system. A built-in relay will close when voltage, frequency and phase are within safe limits. The relay output can be connected in series with a manual contact to operate the circuit breaker between the two systems. A voltage adjustment is provided on the front facia. The voltage adjustment can be set to accept closure when voltage difference between the two systems is within the range of 10 to 15percent. LED based indication of relay activity is also provided.
Contact for Pricing