G3600 Voltage Relay. 24V DC. The G-Line relays are mainly intended for use in land-based applications. The G-Line relays provide an efficient solution for applications where flexibility and cost of purchase are the main issues. G-Line relays provide high quality, proper measuring techniques and a vast number of programmable options.

Motorized Potentiometer24VDC, 10turn,100. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost

Alarm Annunciator. Alarm annunciator. Compact unit for flush mounting. 8 input contacts normally open or normally closed. Time delays 50 msec. - 15 sec. individually selectable on all channels. One common output relay for sirenand two programmable output relays for alarms with voltage free contacts. LED color change through plug-in system. Plug-in terminal block for easy service. Two integrated push buttons for siren reset/lamp test and alarm accept. DC or AC supply voltage. Remote individual selectable blocking with adjustable unblocking delay 1 - 15 sec. External dimming possibilities.

SE-325S is a neutral-grounding resistor monitor with a supply voltage of 120 ac and a ground-fault trip level of 0.5–4.0 A.

INDICATING PANEL 344 Bar Knob 16-32V. Panel Mount Enclosed Fuse Holders for 3AG/AB Fuses.

KLDR010 is a Class CC fuse with an ampere rating of 10.

FUSE AGX 8AG 32V BOX 20A. Originally stood for “all glass.” The automotive industry uses the “AG” prefix (AGC, AGW) for most glass fuses. They vary in length, diameter and amperage rating.

FAST-ACTING 5X20 GLASS M-PACK 4A. 5x20mm fast-acting ceramic body cartridge fuse designed to IEC specification. Features: Designed to International (IEC ) Standards for use globally. Meets the IEC 60127-2, sheet 1 specification for fast-acting fuses. Available in cartridge and axial lead form RoHS compliant and lead-free.

PANELMOUNT SHKSAFE FSEHLDR 2AG FUSE LS3A. Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65 and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and anti-tease feature that eliminates circuit interruptionwhen knob is accidentally depressed.

PANELMOUNT SHKSAFE FSEHLDR 2AG FUSE LS8A. Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65 and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and anti-tease feature that eliminates circuit interruptionwhen knob is accidentally depressed.

PANELMOUNT SHKSAFE FSEHLDR 3AG FUSE RF2A. Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65 and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and anti-tease feature that eliminates circuit interruptionwhen knob is accidentally depressed.

PANELMOUNT SHKSAFE FSEHLDR 3AG FUSE LS7A. Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65 and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and anti-tease feature that eliminates circuit interruptionwhen knob is accidentally depressed.