Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 1993-2004 of 452,166 results

CompleTech CA420Y+++++ - directional yagi - Frequency range: 405-440 MHz - Gain: 13 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 173 N
CompleTech

CA420Y+++++


directional yagi - Frequency range: 405-440 MHz - Gain: 13 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 173 N

Contact for Pricing

Socomec 19PV3026 - SIRCO MOT PV 3X250A F 1500VDC
Socomec

19PV3026


SIRCO MOT PV 3X250A F 1500VDC

Contact for Pricing

EKS Engel 0410001003333EV10-00 - EL100-2M/6x10/100TX-2x100FX-MM-SC IE Switch (Managed/Ring/Extended)
EKS Engel

0410001003333EV10-00

10001696


EL100-2M/6x10/100TX-2x100FX-MM-SC IE Switch (Managed/Ring/Extended)

Contact for Pricing

ABB - Low Voltage Drives DCF803-0035 - Externally mounted, half controlled 3-phase field exciter, with single quadrant operation. This field supply is current regulated with a max output current of 35 amps. With 1-phase input, an autotransformer is recommended for voltage adaptation. An input line reactor is required when supply voltage is over 400 Vac. Fuses are always required. DSL communication cable is required. Communication to the converter unit is required via the SDC-DSL-4 board, standard in D5-D7 and all drives 600 Vdc or greater, otherwise optional.
ABB - Low Voltage Drives

DCF803-0035

3ADT209023R0001


Externally mounted, half controlled 3-phase field exciter, with single quadrant operation. This field supply is current regulated with a max output current of 35 amps. With 1-phase input, an autotransformer is recommended for voltage adaptation. An input line reactor is required when supply voltage is over 400 Vac. Fuses are always required. DSL communication cable is required. Communication to the converter unit is required via the SDC-DSL-4 board, standard in D5-D7 and all drives 600 Vdc or greater, otherwise optional.

Contact for Pricing

Brad Harrison 1R3004A20A120 - Mini-Change® A-Size Receptacle, 3 Poles, 1/2" - 14 NPT Threads, Female (Straight) to 16 AWG Leads, 0.305m (1.0') Length
Brad Harrison · Brad · Mini-Change

1R3004A20A120

1300130135


Mini-Change® A-Size Receptacle, 3 Poles, 1/2" - 14 NPT Threads, Female (Straight) to 16 AWG Leads, 0.305m (1.0') Length

Contact for Pricing

Minimum Qty: 4

Multiplier: 1

*Contact for lower quantities*

nVent PLT43G52 - PLENUM G52 TO T43
nVent · nVent HOFFMAN

PLT43G52


PLENUM G52 TO T43

Contact for Pricing

NSI Industries IPLD2-4 - The Polaris IPLD2-4 Multi-Tap Dual-Sided Entry Black Connector features 4 ports sized for 2 AWG - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLD2-4


The Polaris IPLD2-4 Multi-Tap Dual-Sided Entry Black Connector features 4 ports sized for 2 AWG - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

NSI Industries ITG-1B - The Polaris ITG-1B Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 1 - 10 AWG Class B, C or D wires or 2 - 10 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
NSI Industries · Polaris · Polaris Grey

ITG-1B


The Polaris ITG-1B Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 1 - 10 AWG Class B, C or D wires or 2 - 10 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.

Contact for Pricing

ABB - Electrification TLQ412C - LD CTR MLO 125A 4/8 CU N1 UL
ABB - Electrification · GE

TLQ412C


LD CTR MLO 125A 4/8 CU N1 UL

Contact for Pricing

SolaHD EE2H30S - SolaHD, Ventilated Distribution Transformer, DOE 10 Cfr P431 - DOE 2016 Compliant, Ul Listed E25872, 30 KVA, Primary Voltage 480 V, Secondary Voltage 208 V, 60 HZ, 3 Phase, Number Of Taps 7, Temperature Rating 150 Degrees C, Connection Delta-Wye, Winding Aluminium, Enclosure Nema Type 1
SolaHD

EE2H30S


SolaHD, Ventilated Distribution Transformer, DOE 10 Cfr P431 - DOE 2016 Compliant, Ul Listed E25872, 30 KVA, Primary Voltage 480 V, Secondary Voltage 208 V, 60 HZ, 3 Phase, Number Of Taps 7, Temperature Rating 150 Degrees C, Connection Delta-Wye, Winding Aluminium, Enclosure Nema Type 1

Contact for Pricing

ABB - Electrification TM42EC3 - REPL FRONT TM42420C
ABB - Electrification · GE

TM42EC3


REPL FRONT TM42420C

Contact for Pricing

ABB - Electrification PAL2412 - ABB ReliaHome makes homes reliable, with ease. We designed our ReliaHome load centers to be installed as fast as possible – and reliable so your customers can leave a job with confidence. They work seamlessly with all our residential circuit breakers, optimizing your stock.
ABB - Electrification · ABB

PAL2412


ABB ReliaHome makes homes reliable, with ease. We designed our ReliaHome load centers to be installed as fast as possible – and reliable so your customers can leave a job with confidence. They work seamlessly with all our residential circuit breakers, optimizing your stock.

Contact for Pricing

Showing 1993-2004 of 452,166 results