Showing 3589-3600 of 452,163 results

NSI Industries · Polaris · Grounding
UC-121
The NSI UC-121 Bronze Heavy Duty U-Bolt Clamp is designed to grip rods and ground 1-1/4" IPS pipes in parallel or 90-degree positions with an easily adjusted, durably strong design. The high-copper-content alloy of the clamp provides excellent conductivity and heavy-duty strength, alongside the silicon bronze nuts and lockwashers. Use this U-bolt for demanding applications in harsh environments, including direct burial in earth or concrete. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · Polaris · Terminal Blocks
ITB35-12
12 Circuit Insulated Terminal Block for wire range 22-12, rated RU, 35AMPS. "Touchproof" saety with recessed screws and tubular contacts. Cut into smaller sections or stack end to end. Nylon 66 housing, brass metal alloy with nickel plated terminal insert.
Contact for Pricing

NSI Industries · Polaris · Connector Blocks
AM-R1-R1
Power Distribution Block (1) 500 MCM-4 AWG Primary (1) 500 MCM-4 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
Contact for Pricing

Contact for Pricing

NSI Industries · Polaris · Tools
NSI-12
12-Ton Compression Tool for U-Type Dies APPLICATIONS: Delivers 12 tons of hydraulic force. It has a 1 1/2" jaw opening for large conductors and taps with automatic two-speed pump action for rapid ram advancement. It features a 180 degree head rotation and fast ram release with the twist of the handle. It accepts all standard U-Type dies.
Contact for Pricing

- Save space with triple deck terminal blocks: 3 independent circuits connected in just 6 mm 0.236 in spacing, - Adapted for 3 wires sensor/actuator, - Quickly identify the signal circuit status thanks to the indicator.
Contact for Pricing
Minimum Qty: 300
Multiplier: 300
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

M8/M12 Cable Assemblies, Sensor/Actuator, 3 Position, A Keying Code, M8 Plug, M8 Socket, M8, Right Angle Connector Orientation (End A), M8 Connector
Contact for Pricing
Minimum Qty: 16
Multiplier: 16
*Contact for lower quantities*

Contact for Pricing

NSI Industries · NSI
ITO-4CB
The Polaris ITO-4CB Multi-Tap Offset Dual-Side Entry Vision Tap Connector features 2 ports sized for 4 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · Polaris
ITD-2/0
The Polaris ITD-2/0 Multi-Tap Dual-Sided Entry Vision Tap Connector features 2 ports sized for 2/0 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · Polaris · Polaris Vision Tap
ITD-2/0C
The Polaris ITD-2/0C Multi-Tap Dual-Sided Entry Vision Tap Connector features 2 ports sized for 2/0 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing