Showing 3457-3468 of 452,163 results

CompleTech
CA450F2+++++
directional end fire yagi array - Frequency range: 440-475 MHz - Gain: 12 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 320 N
Contact for Pricing

High Speed Fuse Amp-Trap® A70QS 700VAC 700VDC 450A Bolted Blade IL Indicator 4K
Contact for Pricing

Square Body High-Speed Fuse Protistor® Size 71 gR 600VDC IEC 650VDC UL 250A With Striker Flush ends metric threads
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

SolaHD
E075
Encapsulated Industrial Control Transformer 75VA, Volts Primary: 220x440, 230x460, 240x 480, Volts Secondary: 110, 115, 120, Frequency 50/60 HZ/60 HZ
Contact for Pricing

Push Button Station Cover, "Evacuation", Yellow - Latching contact or momentary activation depending on model. Evacuation and Emergency stations available. Quick reset. Cover with alarm discourages tampering. ADA Compliant. UL Listed, cUL Listed and CSFM Approved.
Contact for Pricing

Surge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated. The surge protection devices for the 1+0 configuration are available for 60 V to 600 V nominal voltage sub-distribution board applications.
Contact for Pricing

Surge-Trap® Pluggable SPD provides advanced overvoltage protection. Utilizing Mersen's patented TPMOV® design, which does not require fuses, a fuse holder or additional wiring in meeting the UL 1449 Third Edition standards thus providing substantial cost savings and reduced installation times. It also features a visual indicator, easy installation, fail-safe design, mechanical coding and remote monitoring. The Surge-Trap Pluggable SPD base is designed to be mounted on 35mm DIN-rail while plugs are easily replaceable upon failure without touching the base or the hassle of rewiring. 230 Volts TN system type .
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

Surge-Trap® Pluggable SPD provides advanced overvoltage protection. Utilizing Mersen's patented TPMOV® design, which does not require fuses, a fuse holder or additional wiring in meeting the UL 1449 Third Edition standards thus providing substantial cost savings and reduced installation times. It also features a visual indicator, easy installation, fail-safe design, mechanical coding and remote monitoring. The Surge-Trap Pluggable SPD base is designed to be mounted on 35mm DIN-rail while plugs are easily replaceable upon failure without touching the base or the hassle of rewiring. 550 Volts, UL Plug .
Contact for Pricing

Mencom Corporation · Mencom
CZAP-25L2
Standard, Rectangular Base, IL-BRID Single Latch, Surface mount, size 66.16, 2 Side PG16 cable entries, High Construction
Contact for Pricing

Mencom Corporation · Mencom
DP-RJ45-USB-10-32LS
Panel Interface Connector with Duplex outlet, RJ45, USB-10, in a 32 housing
Contact for Pricing

Mencom Corporation · Mencom
JDC-05P-224-C050
JDC Junction Blocks, 5 Pin, 10 Port, PNP, 5 Meters of Home Run Cable
Contact for Pricing

Mersen’s wide range of handles for our Low Voltage Disconnect switches includes direct-mount, selector-style, and pistol-style in different lengths. Many of these handles have locking capabilities and are available in different colors and IP and NEMA ratings. We also have metal handles and special handles for flange-mounting. Direct mounted for 30 amp FDS series.
Contact for Pricing