Showing 2365-2376 of 452,163 results

Contact for Pricing

The AIMA-01 I/O Module Adapter is an extension unit for the mounting of I/O extension modules, such as RDIO-01, RAIO-01 and RTAC-01, outside the drive unit. The AIMA-01 is connected to the drive via a DDCS-protocol fibre optic link. Up to three I/O extension modules can be mounted on one AIMA-01 adapter. Several AIMA-01 adapters can be connected in a ring topology using fibre optic cable.
Contact for Pricing

Contact for Pricing

Safeway® Phenolic Hand Lamp with 100W Screw Release Guard Switch and Receptacle
Contact for Pricing

Mencom Corporation · Mencom
MIN-2MR-1-PG13.5
MIN Size I, Receptacle, 2 Pole, Male Straight, 1 Ft, 16awg, 13A, PG13.5, Front Mount, Aluminum Clear Anodized
Contact for Pricing

Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type P fuse is used for non-motor loads and Type D, for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type S plug fuses are time-delay and tamper resistant. 125 Volts 15 Amps GP series. 125 Volts 20 Amps GTL series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*

ABB - Installation Products · OCAL
EYS71-G1
PVC Double-Coated Conduit Sealing Fitting, EYS Series for Hazardous Locations, for Sealing in Vertical or Horizontal Position, Male and Female Hub, Hub Size 2-1/2 Inch/63 Metric, Ductile Iron,Gray
Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 300HP, 361A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 37.6x14.96x16.26 in, Wall, PROFINET, configured for FB adapter 2
Contact for Pricing

Contact for Pricing

ACS880 AC Drive, 3-380-500V In, 20HP, 27A, Type 1, 1.1 overload, Assistant Bluetooth, HxWxD 18.7x6.77x10.28 in, Wall, PROFIBUS DP, Thermistor protection module
Contact for Pricing

Contact for Pricing

The ISS-105 is a “smart” five-channel intrinsically safe relay and pump controller. The ISS-105 can be configured for a wide variety of applications including alternating or non-alternating duplex, duplex separate pump stop (SPS), triplex and quadplex applications. It can be set up for pump-up or pump-down applications or can be used as a five-channel relay. The ISS-105 has a long list of features that are needed for multiple pump applications. The ISS-105 can indicate low, high and out-of-sequence alarms. If an out-of-sequence alarm occurs, the skipped pump(s) will be started as intended. The Model ISS-105 can be set up to do non-alternating control, alternating control and alternating control with one non-alternating pump. The non-alternating pump is intended for use with an emergency or jockey pump. The ISS-105 can start an emergency pump once every 50 cycles to keep it working freely. Using the built-in DIP switches, individual pumps can be disabled when taken out of service for repair or maintenance.
Contact for Pricing