Showing 2533-2544 of 452,163 results

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

FSPDBs introduce a new level of safety and ease for installing power distribution blocks. An IP20 level of finger safe protection is achieved using the FSPDBs and thus eliminates the need for special covers or custom Plexiglas sheets to protect your panels. FSPDBs (sizes 1 to 4) simply snap onto 35mm DIN rail to provide the quickest installation. And since they are modular, you can form any number of poles desired. If multi-pole panel mounting is desired, multiple-pole assembly pins are available. FSPDBs provide a safe, convenient way of splicing cables, splitting primary power into a variety of secondary circuits or providing a fixed junction tap-off point. size 2 cap .
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing

DRIVE CFW500D24P0T4DB20G2 WEG specifications: Power supply 380-480 V; Input phases Three-phase; Configuration With options; Rated current (HD) 24 A; RFI filter Without filter; Enclosure IP20; Dynamic braking Standard with braking; Safety Stop Prepared to install the accessory CFW500-SFY2
Contact for Pricing

The RDCO-02 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 5 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.
Contact for Pricing

Braking Resistor, 3.6 OHMS, 17640 WATTS, GCE24 Enclosure, 28W x 13D x 10H in, 82 lbs
Contact for Pricing

Super-Safeway® GFCI Multiple Outlet Box with Ground Continuity Monitor, Open Neutral Relay, (2) NEMA 5-15 Duplex with Flip Lids, 15.24m (50.0' ) Cord Length, 12/3 SOOW Cord, NEMA 5-15 Plug
Contact for Pricing

Contact for Pricing

Mersen GPM-G panel mount fuse holders will accommodate 1/4"x1-1/4" fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps finger grip or screw cap 3/16 solder/QC terminal BULK PKG series.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

The Innovative and comprehensive UltraSafe range of Mersen fuse-holders. Modular fuse-holders are finger-safe under IEC standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). Modular fuse-holders are available in 1, 2, 3 or 4 poles, with or without visual blown fuse indicators, in UL + IEC version. Multi-pole units can also be field assembled by ordering pin-ties assembly kit. , UltraSafe range is made of tough and durable thermoplastic or thermoset material. For 10x38 PV fuses with indicator
Contact for Pricing
Minimum Qty: 12
Multiplier: 12
*Contact for lower quantities*

Contact for Pricing

125VAC rated GGU fuses have midget fuse dimensions (1-1/2" x 13/32"). 20A and above have ceramic bodies, allowing use in higher ambient temperature conditions than other similar fuses. (Not for Branch Circuit Protection). 125 Volts 4 Amps .
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*