Showing 2725-2736 of 452,163 results

NSI Industries · Polaris · Polaris EDGE
ISPB2/0-3B
The Polaris ISPB2/0-3B Multi-Tap Direct Burial Single-Sided Entry Connector features 3 ports sized for 2/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds UL 486D and ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
Contact for Pricing

NSI Industries · WarriorWrap
WW-HR-10
WarriorWrap WW-HR-10 Black High-Voltage Linerless Rubber Splicing Tape is strong enough for professional environments and gets the job done right the first time, every time. This tape is 30mil thick, 1 inch wide, 30ft long and has an ethylene rubber-based design. The self-bonding adhesive helps stick to uneven surfaces and easily conforms to irregular shapes. Top breaking strength and elasticity make WarriorWrap an excellent choice for insulating, jacketing of splices on power cables, jacketing terminations or for building stress cones.
Contact for Pricing

NSI Industries · WarriorWrap
WW-HW-75
WarriorWrap WW-HW-75 Black Harness Wrap Vinyl Electrical Tape gets the job done right the first time, every time. This tape is 5mil thick, .75 inch wide, 60ft long and has a UV and moisture-resistant vinyl design. The superior elasticity and exceptional adhesion help stick to uneven surfaces and easily conforms to irregular shapes. Top breaking strength, elongation and elasticity make WarriorWrap an excellent choice for the harnessing and bundling of cables in a variety of professional commercial applications.
Contact for Pricing

NSI Industries · WarriorWrap
WW-SC-75
WarriorWrap WW-SC-75 Gray Rubber-Based Semi-Conducting Tape is strong enough for professional environments and gets the job done right the first time, every time. This tape is 30mil thick, .75 inch wide, 15ft long and is made from temperature-stable materials. The self-amalgamating tape has no adhesive but is self-bonding and conforms to irregular shapes. Top breaking strength, elongation and elasticity make WarriorWrap an excellent choice for high voltage splices or terminations, shielding bus and overhead connections, filling indents in compression connectors or rebuilding strand shielding.
Contact for Pricing

NSI Industries · RHINO Safety
SG-103C
The RHINO Safety SG-103C Safety Glasses feature clear polycarbonate lenses in a comfortable Hytrel and EVA foam frame designed to be impact-resistant and offer increased protection. The clear lenses are designed for indoor applications and built to be both impact- and scratch-resistant. These glasses have all the durability needed to survive your jobsite and a comfortable wraparound design to fit most heads, with EVA foam pads to maintain a cushioned grip.
Contact for Pricing

ABB - Electrification · GE · Power Break II
SPUV120ACR
The undervoltage release is an electronic module used to open the circuit breaker when the monitored voltage drops below 35-60PERC of its rated value. The undervoltage release "resets" when the monitored voltage is re-established allowing the circuit breaker to reclose (the sealing voltage of the UVR is 60-85PERC of its rated voltage). An undervoltage release trip operation is produced by the MicroVersaTrip½ Plus unit in response to a signal from the undervoltage release module. This allows the trip unit to record, display, distinguish an d comm un icate (in MicroVer saTri p½ PM trip units) that the breaker opening event was due to undervoltage release. Operation of the undervoltage release module will prevent breaker contact closure, i.e. "kiss-free" operation. When energized, the undervoltage release supplies +24 Vdc power to the trip unit to power the display. Field installable. 0ACR Frame Rating Amps 2500
Contact for Pricing

Panduit
PNF14-6F-C
Fork Terminal, nylon insulated, funnel entry, 16- 14 AWG, #6 stud size, standard package.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Panduit
F118X276AJT-A
The F118X276AJT-A Thermal Transfer Flag Label offers improved legibility and more informational space for small wires and cables, providing clearer, more complete identification. The design allows the application of the flag as a permanent adhesive label. Compatible with Panduit Easy-Mark Plus Labeling Software. For use with TDP printers. Polyester 1.18" x 2.76" (29.97 mm x 70.1 mm) Cable diameter 0.083" - 0.27" (2.12 mm - 6.86 mm) Color White. 2000 labels.
Contact for Pricing
Minimum Qty: 4000
Multiplier: 2000
*Contact for lower quantities*

Panduit
T62N-C0
The T62N-C0 Nylon 6.6 Spiral Wrap provides continuous abrasion protection for wires, cables, and tubing. The spiral wrap harnesses multiple cables into a single manageable bundle while allowing for breakouts. Lightweight, flexible, durable protection for use with irregular shapes. Rated for use up to 149 F (65 C). 0.62" (15.9 mm) diameter x 100' (30.5 m) long. Bundle Diameter Range 0.5" to 4.5" (12.7 mm to 114.3 mm). Color Black.
Contact for Pricing

ABB - Electrification · ABB
PAM3015
ABB ReliaHome makes homes reliable, with ease. We designed our ReliaHome load centers to be installed as fast as possible – and reliable so your customers can leave a job with confidence. They work seamlessly with all our residential circuit breakers, optimizing your stock.
Contact for Pricing

ABB - Electrification · GE
TLMQ612SCUDG
ReliaHome T-Series convertible load centers arrive as main lug, but have the capability to have a main breaker installed. All ABB load centers are rated up to 60 degree/75 degree centrigrade and is suitable for use with service entrance equipment when installed in accordance with electrical code. The TLMQ612SCUD features space for 6, 1" breakers, 125 A bus ampere rating, a copper bus, an optional door for 6-8 circuit panel, a factory installed ground bar, and a surface enclosure.
Contact for Pricing

Contact for Pricing