Showing 2593-2604 of 452,163 results

Mersen GPM-G panel mount fuse holders will accommodate 1/4"x1-1/4" fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps finger grip or screw cap 3/16 solder/QC terminal BULK PKG series.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

DRIVE CFW500D24P0T4DB20G2 WEG specifications: Power supply 380-480 V; Input phases Three-phase; Configuration With options; Rated current (HD) 24 A; RFI filter Without filter; Enclosure IP20; Dynamic braking Standard with braking; Safety Stop Prepared to install the accessory CFW500-SFY2
Contact for Pricing

The RDCO-02 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 5 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.
Contact for Pricing

Braking Resistor, 3.6 OHMS, 17640 WATTS, GCE24 Enclosure, 28W x 13D x 10H in, 82 lbs
Contact for Pricing

Contact for Pricing

CompleTech
CA420Y++
directional yagi - Frequency range: 405-440 MHz - Gain: 10 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 92 N
Contact for Pricing

CompleTech
CA430GP+
omnidirectional ground plane - Frequency range: 426-434 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 44 N
Contact for Pricing

Braking Resistor, 50 OHMS, 300 WATTS, CR300 Enclosure, 9W x 3D x 1.5H in, 3 lbs
Contact for Pricing

CABINET DRIVE REGENERATIVE, Product Family: ACS800, Horsepower: 150 HP, Output Current: 192 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Mounting: Floor-mounted, Local or Remote Mounted LCD Display and Keypad, Bottom Entry, Bottom Exit, 3-Phase Input, 3-Phase Output, Frame: R7i, Product HxWxD: 91.1 in x 24.8 in x 25.4 in, Product Weight: 882 lbs
Contact for Pricing

Braking Chopper, Nominal AC Line Voltage 200-240V, Minimum 1.09 OHM, RMS Continuous Load Current 115 A
Contact for Pricing

Contact for Pricing

Contact for Pricing