Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 7681-7692 of 452,166 results

Integra Enclosures H181608HCLL - 18x16x8 Polycarbonate Enclosure NEMA 4X | Hinged Clear Cover | Stainless Steel Locking Latch | Mounting Feet
Integra Enclosures

H181608HCLL


18x16x8 Polycarbonate Enclosure NEMA 4X | Hinged Clear Cover | Stainless Steel Locking Latch | Mounting Feet

Contact for Pricing

Patton Electronics 222NSM-25F - RS232-422 CONV,SURGE PROTECTED
Patton Electronics

222NSM-25F


RS232-422 CONV,SURGE PROTECTED

Contact for Pricing

Patton Electronics CL141E/BT90/24 - Industrial Gigabit 90W (802.3BT) PoE Injector; 24-56VDC input
Patton Electronics

CL141E/BT90/24


Industrial Gigabit 90W (802.3BT) PoE Injector; 24-56VDC input

Contact for Pricing

Patton Electronics FOI-2971-R-ST - Isolator for telephone (POTS), exchange side, Multimode ST optics, RFI suppressed, Power Options Sold Separately
Patton Electronics

FOI-2971-R-ST


Isolator for telephone (POTS), exchange side, Multimode ST optics, RFI suppressed, Power Options Sold Separately

Contact for Pricing

Patton Electronics FP102E/SFP/BT90/52 - Industrial 10 Gigabit SFP Media Converter with IEEE802.3BT Power Injector (90W); 1G/10GBase-T (RJ45); 1G/10GBase-X (SFP); -40 ot 75C; 12-56VDC Input
Patton Electronics

FP102E/SFP/BT90/52


Industrial 10 Gigabit SFP Media Converter with IEEE802.3BT Power Injector (90W); 1G/10GBase-T (RJ45); 1G/10GBase-X (SFP); -40 ot 75C; 12-56VDC Input

Contact for Pricing

Patton Electronics FP1108E/2SFP/DC - Unmanaged Industrial 10 Gig Ethernet Switch; 8 x 10/100/1000; 2 x 10GigE SFP; -40 to 75C; 12-48VDC input
Patton Electronics

FP1108E/2SFP/DC


Unmanaged Industrial 10 Gig Ethernet Switch; 8 x 10/100/1000; 2 x 10GigE SFP; -40 to 75C; 12-48VDC input

Contact for Pricing

Littelfuse LMIN020.V - LOW-PROFILE MINI 58VDC SILVER 20A. The Low Profile MINI® fuse has similar performance characteristics as the standard MINI® fuse. The lower overall height allows for more space and weight savings. The Low Profile MINI® fuse is designed to mate with tuning-fork terminals, which provides additional weight and material savings in fuse box designs by eliminating the need for female box terminals.
Littelfuse · MINI Series

LMIN020.V


LOW-PROFILE MINI 58VDC SILVER 20A. The Low Profile MINI® fuse has similar performance characteristics as the standard MINI® fuse. The lower overall height allows for more space and weight savings. The Low Profile MINI® fuse is designed to mate with tuning-fork terminals, which provides additional weight and material savings in fuse box designs by eliminating the need for female box terminals.

Contact for Pricing

Minimum Qty: 5

Multiplier: 5

*Contact for lower quantities*

Littelfuse LDFJ100.V - LDFJ100 is a Class J fuse with an ampere rating of 100.
Littelfuse · LDFJ Series

LDFJ100.V

LDFJ100.V


LDFJ100 is a Class J fuse with an ampere rating of 100.

Contact for Pricing

Littelfuse PLM9405 - The PLM Series is a 3-phase voltage monitor that continuously monitors each of the three phases. Monitors both delta and wye systems and no connection to neutral is required. The microcontroller circuit design protects against undervoltage, voltage unbalance, phase loss and phase reversal. Protection is assured when regenerated voltages are present. Operation: The output relay is energized and the LED glows green when all voltages are acceptable and the phase sequence is correct. Under and unbalanced voltages must be sensed for a continuous trip delay period before the relay de-energizes. Reset is automatic upon correction of the fault condition. The output relay will not energize if a fault condition is sensed as power is applied. The LED flashes red during the trip delay, then glows red when the output de-energizes. The LED flashes green/red if phase reversal is sensed. Field Adjustment: Set voltage adjustment knob at the desired operating line voltage for the equipment. This adjustment automatically sets the undervoltage trip point. Apply power. If the PLM fails to energize, (LED glows red) check wiring of all 3 phases, voltage, and phase sequence. If phase sequence is incorrect, the LED flashes green/red. To correct this, swap any two line voltage connections at the mounting socket. No further adjustment should be required.
Littelfuse · SSAC

PLM9405

PLM9405


The PLM Series is a 3-phase voltage monitor that continuously monitors each of the three phases. Monitors both delta and wye systems and no connection to neutral is required. The microcontroller circuit design protects against undervoltage, voltage unbalance, phase loss and phase reversal. Protection is assured when regenerated voltages are present. Operation: The output relay is energized and the LED glows green when all voltages are acceptable and the phase sequence is correct. Under and unbalanced voltages must be sensed for a continuous trip delay period before the relay de-energizes. Reset is automatic upon correction of the fault condition. The output relay will not energize if a fault condition is sensed as power is applied. The LED flashes red during the trip delay, then glows red when the output de-energizes. The LED flashes green/red if phase reversal is sensed. Field Adjustment: Set voltage adjustment knob at the desired operating line voltage for the equipment. This adjustment automatically sets the undervoltage trip point. Apply power. If the PLM fails to energize, (LED glows red) check wiring of all 3 phases, voltage, and phase sequence. If phase sequence is incorrect, the LED flashes green/red. To correct this, swap any two line voltage connections at the mounting socket. No further adjustment should be required.

Contact for Pricing

Littelfuse 201-575-AU - The 201A-AU is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-480VAC, 50/60Hz motors regardless of size. Has user adjustable 1-30 second trip delay, manual or 1-500 second restart delay, and 2-8% voltage unbalance trip point. The product also provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. The Model 201A-AU includes advanced single LED diagnostics, where five different light patterns distinguish between faults and normal conditions. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the 201A-AU's output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels.
Littelfuse · Symcom

201-575-AU

201575-AU


The 201A-AU is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-480VAC, 50/60Hz motors regardless of size. Has user adjustable 1-30 second trip delay, manual or 1-500 second restart delay, and 2-8% voltage unbalance trip point. The product also provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. The Model 201A-AU includes advanced single LED diagnostics, where five different light patterns distinguish between faults and normal conditions. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the 201A-AU's output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels.

Contact for Pricing

Littelfuse SPD2-PV11-3P0-R - Surge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated. The surge protection devices for the 1+0 configuration are available for 60 V to 600 V nominal voltage sub-distribution board applications.
Littelfuse · SPD2 Series

SPD2-PV11-3P0-R

SPD2-PV11-3P0-R


Surge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated. The surge protection devices for the 1+0 configuration are available for 60 V to 600 V nominal voltage sub-distribution board applications.

Contact for Pricing

Littelfuse 3453LF8A - PANELMOUNT SHKSAFE FSEHLDR 3AG FUSE LF8A. Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65 and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and anti-tease feature that eliminates circuit interruptionwhen knob is accidentally depressed.
Littelfuse · 345 Series

3453LF8A

03453LF8X


PANELMOUNT SHKSAFE FSEHLDR 3AG FUSE LF8A. Designed to eliminate the possibility of electrical shock, as defined in IEC standards 65 and 257. Shock-Safe fuseholders feature a low profile body, fingergrip knob and anti-tease feature that eliminates circuit interruptionwhen knob is accidentally depressed.

Contact for Pricing

Showing 7681-7692 of 452,166 results