Showing 6577-6588 of 452,163 results

Contact for Pricing

Contact for Pricing

NSI Industries · Polaris · Polaris EDGE
ISPB350-3
The Polaris ISPB350-3 Multi-Tap Direct Burial Single-Sided Entry Connector features 3 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and is designed for use in a wide range of temporary submersed or burial splicing applications.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

NSI Industries · Polaris · Mechanical Connector
2-250T
2 Port Aluminum Lug 250 MCM - 6 AWG Aluminum Double Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts, 90 degrees C. UL 486A/B Listed.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

NSI Industries · Polaris
6TC-1
Single Copper Lug 6-14 AWG Copper connector made from tubular copper. Steel Screw. Suitable for use with copper wire only. 600V (2000V max. per UL486B). Ul 486A/B Listed Wire Connector. Temperature rating 90 degrees C.
Contact for Pricing

NSI Industries · Polaris
TL4
Copper Terminal Lug for 4 STR-14 SOL AWG with 1) 1/4" Mounting Hole: Copper Terminal Lugs are made of high copper alloy. They are used for joining a wide range of cables or terminal blocks.
Contact for Pricing

NSI Industries · Polaris · Grounding
GLC-140DB
NSI GLC-140DB Heavy Duty Direct Burial Ground Clamps grip on pipes between 1/2" to 1" in diameter and are the ultimate ground clamps for securing just about any size ground wire in just about any application. The bronze body and pre-assembled 304 stainless steel screws are made of economical, high-quality metals that provide durable performance in a range of applications. The lay-in lug design of these clamps provides ultimate flexibility when securing large conductors and can accommodate wires in the range of 8 to 4/0 STR. Use this heavy-duty ground clamp to secure ground wire to copper water pipes, tubing, rebar and ground rods up to 1" in diameter. UL Listed for direct burial in both earth and concrete. cULus Listed 467 for grounding and bonding. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · Polaris
2024MB
225A Stacked Neutral Bar, 4-14 AWG 20 Circuits, 1/0-14 AWG 4 Circuits & 350 MCM - 6 AWG Main Lug With Mtg Base
Contact for Pricing

NSI Industries · Polaris · Grounding
GH-75
Use the GH-75 Bronze Economy 360 Degree Conduit Hub alongside NSI ground clamps to ground copper grounding conductor to water pipes in indoor environments. This 3/4" adapter hub swings 360 degrees to make alignment simple and offer greater flexibility in installation. The threaded bronze hub is cast of high-strength, highly conductive bronze and made of economical, high-quality metals that provide durable performance in a range of applications. Conduit hub fits ground wire in the range of 10 SOL to 2/0 STR. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · Polaris · Grounding
G-66
The NSI G-66 Bronze Ground Clamp with Wire Adapters grips on pipes between 1-1/4" to 2" in diameter and features a special pressure bar which grips wiring and lessens the chances of grounding conductor being pulled out. The zinc-plated steel screws and bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this clamp with wire adapters for connecting unarmored 4, 6, or 8 STR ground wire to water pipe for grounding. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · Polaris · Split Bolts
N-1000SP
All Purpose Split Bolt Connector 1000 MCM All Purpose Split Bolt Connectors are used for combinations of aluminum to copper, aluminum to aluminum, steel to aluminum, copper to copper, and steel to copper applications. They have an electro-tinned body. UL listed for copper and copperweld wires only. Includes nut, spacer and pressure pad.
Contact for Pricing

NSI Industries · Polaris
N-750SP
All Purpose Split Bolt Connector 750 MCM All Purpose Split Bolt Connectors are used for combinations of aluminum to copper, aluminum to aluminum, steel to aluminum, copper to copper, and steel to copper applications. They have an electro-tinned body. UL listed for copper and copperweld wires only. Includes nut, spacer and pressure pad.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*