Showing 2917-2928 of 452,166 results

Hewlett Packard Enterprise HPE
P70542-291
HPE ProLiant DL360 Gen11 4514Y 2.0GHz 16-core 1P 32GB-R MR408i-o NC 8SFF 1000W PS Server
Contact for Pricing

Contact for Pricing

Hammond Power · HPS · dV/dT Filters
CD1X0160E1
dV/dT filter 160 amperes up to 600 volts Type 1 1000 feet
Contact for Pricing

nVent · nVent HOFFMAN · Sequestr
A90XD5EW24FTCLPG
Sequestr External Disconnect Pkg Gry In Type 12, 90.12x197.75x24.12, Gray, Steel
Contact for Pricing

Contact for Pricing

ACS55 AC Drive, 3-200-240V In, 1HP, 4.3A, Type OPEN, 1.1 overload, Integrated, HxWxD 5.77x2.66x5.04 in, Module
Contact for Pricing

Contact for Pricing

ER-72KV is a sensing resistor accessory used on systems up to 72 kV (non-continuous duty) to monitor the continuity of a neutral-grounding resistor. It is an accessory for SE-330HV.
Contact for Pricing

Littelfuse · M1000 Series
M1000.0080
Alarm Annunciator12-24V DCIP54. The M1000 is an Alarm Monitor capable of surveying the state of up to 10 potential free contacts. The inputs of the M1000 can be used to monitor both normally open (NO) and normally closed (NC) contacts. Each contact can be sourced to a positive or negative reference. The M1000 includes a total of 10 inputs. Each input controls two bright red LEDs and an open collector output. A built-in relay provides audible alarm through control of an external siren. The first incoming alarm is indicated with a quick flashing light, following alarms are indicated with slow flashing light. LEDs will keep flashing until the alarms are acknowledged, even though the input signal has been deactivated. Pressing the RESET pushbutton will acknowledge all new alarms whereby all flashing LEDs will change to steady light, provided that the related inputs are still active. Pressing the RESET push button will also silence the siren. The reset sequence is programmable.
Contact for Pricing

Contact for Pricing

TelCom Telephone Extension Ringer Device, Bell Signals Incoming Calls - Available in 120VAC. Activated by ringing voltage (analog telephone only). Type 1 enclosure. 98 dBa signal at 10 feet (108 dBa at 1 meter). CSA Certified. UL Listed for indoor use.
Contact for Pricing

For use with Littelfuse FLNR_ID/FLSR_ID, IDSR, LLNRK/LLSRK and KLNR/KLSR series fuses.
Contact for Pricing