Showing 5677-5688 of 452,163 results

ABB - Electrification · ABB
S202MR-K2
S202MR-K2 MCB K-Char., 10kA, 2A, 2P, RTT UL 1077, Ring Cable Lug
Contact for Pricing

Contact for Pricing

Contact for Pricing

ABB - Electrification · ABB
S203MR-K2
S203MR-K2 MCB K-Char., 10kA, 2A, 3P, RTT UL 1077, Ring Cable Lug
Contact for Pricing

ABB - Electrification · ABB
2TLA020005R1700
Bottom part with cable gland and PCB with 10 screw connections
Contact for Pricing

ABB - Electrification · ABB
2TLA020055R0000
M12 Y-connector for series connection of DYNlink devices such as Eden sensors, Smile Tina and Inca Tina emergency stop buttons, Spot single beam, and Tina adapters. One M12-5 female connector (#2) for connection of the safety device, one M12-5 male connector (#1) for connection of +24VDC, 0V and the incoming dynamic signal and one M12-5 female connector (#3) for continuation of the circuit towards another safety device or Vital/Pluto safety PLC.
Contact for Pricing

Panduit
RGS134B-1
The RGS134B-1 Grounding Strip bonds up to 45RU's within a rack or cabinet with threaded rail fasteners with an EIA Universal Mounting Hole Pattern. Engineered to comply with US and international grounding requirements.
Contact for Pricing
Minimum Qty: 2
Multiplier: 1
*Contact for lower quantities*

Panduit
STP28X2.5MBL
The TX6A-28 10Gig Cat 6A STP Patch Cord is a 2.5-Meter, 0.185-inch (4.7mm) diameter, Black cord constructed of 28 AWG, shielded, twisted pair, solid, CM/LSZH cable with high-performance modular plugs. Its compact 28 AWG design simplifies installation and management. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
Contact for Pricing
Minimum Qty: 10
Multiplier: 1
*Contact for lower quantities*

ABB - Electrification · ABB
AF12-30-22-14
AF12 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 2-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles with a non-removable front-mounted 2 N.O. + 2 N.C. auxiliary contact block, side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 including the "Mechanically Linked" symbol on the contactor side. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: 2-stack contactors available in some countries: please consult your ABB representative.
Contact for Pricing

Contact for Pricing

ABB - Electrification · ABB
KXT3F-3PC
XT3 Breaker Replacement Terminal Screw Kit (One kit required per breaker)
Contact for Pricing

Contact for Pricing