Showing 2593-2604 of 452,166 results

DRIVE CFW500D24P0T4DB20G2 WEG specifications: Power supply 380-480 V; Input phases Three-phase; Configuration With options; Rated current (HD) 24 A; RFI filter Without filter; Enclosure IP20; Dynamic braking Standard with braking; Safety Stop Prepared to install the accessory CFW500-SFY2
Contact for Pricing

ABB - Installation Products · STEEL CITY
MBP
Masonry Box Partition, 3-3/4 Inches Wide x 3-1/2 Inches Deep, Galvanized Steel, Low Voltage, Drilled and Tapped for Mounting, Furnished with Two 8/32 Screws
Contact for Pricing

ABB - Installation Products · Steel City
OWC
Old Work Box Support Clip. Clips Lock Old-Work Steel Switch Boxes Tightly To Wall Plaster, Dry Wall, Concrete Block, Brick Or Concrete. Adapts To Any Wall Thickness Up To 3/4 Inch
Contact for Pricing
Minimum Qty: 250
Multiplier: 250
*Contact for lower quantities*

ABB - Installation Products · SUPERSTRUT
B1400S 10
Channel, 14 Gauge, 1-5/8 Inch x 13/16 Inch, Length 10 Feet, Slotted Steel with 7/16 Inch x 3 Inch Slots on 4 Inch Centers
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

ABB - Installation Products · Sta-Kon
RB14D
Nylon Insulated Wristlock Disconnect, Length 1.70 Inches, Single Piece Length .99 Inches, Maximum Insulation .162, Wire Range #16-#14 AWG, Color Blue, Copper, Tin Plated
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

Contact for Pricing

Mersen GPM-G panel mount fuse holders will accommodate 1/4"x1-1/4" fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps finger grip or screw cap 3/16 solder/QC terminal BULK PKG series.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Contact for Pricing

125VAC rated GGU fuses have midget fuse dimensions (1-1/2" x 13/32"). 20A and above have ceramic bodies, allowing use in higher ambient temperature conditions than other similar fuses. (Not for Branch Circuit Protection). 125 Volts 4 Amps .
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*