Showing 2329-2340 of 452,163 results

ABB - Electrification · GE
TLMQ1412RCU
ReliaHome T-Series convertible load centers arrive as main lug, but have the capability to have a main breaker installed. All ABB load centers are rated up to 60 degree/75 degree centrigrade and is suitable for use with service entrance equipment when installed in accordance with electrical code. The TLMQ1412RCU features space for 12, 1" breakers, a 125 A bus ampere rating, a copper bus, and an outdoor suitable enclosure.
Contact for Pricing

Micro-Change® Molded Junction Box with Molded Cable, Side Mount, 8 Ports, PNP, 5.0m Cable Length
Contact for Pricing

Micro-Change® (1/2"-20 UNF) Single-Ended Cordset, 2 Poles, Male (Straight) to Pigtail, 2-22 AWG PVC Cable, 1.83m Length
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

Contact for Pricing

Panduit
E32E06M
This Panduit Monitored Switched PDU is a versatile power solution, featuring (24) C13 and (8) C19 outlets, designed to accommodate a wide range of devices. It is a 32 amp, operating efficiently at 230V in a single-phase system. This ensures consistent and reliable power distribution. The PDU is equipped with a 10-foot (3m) power cord and an IEC 60309 2P+E 6h 32A (IP44) input plug, providing a secure and robust connection. Ideal for precise power monitoring and control.
Contact for Pricing

NSI Industries · Polaris · Grounding
GSC
Use NSI GSC Combo Slotted Hex Ground Screws to ground solid pigtail and ring terminals when running ground conductor in a wide variety of applications. Screws are designed with a wide flat flange to distribute pressure and ensure solid electrical connections. Pack of 100. Stock products you can rely on—stock NSI.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

NSI Industries · Polaris · Connector Blocks
AL-R1-K6
Power Distribution Block (1) 500 MCM-4 AWG Primary (6) 2/0-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
Contact for Pricing

NSI Industries · Polaris · Easy-Splice
RSK-500
Easy-Splice Direct Burial Splice Kit with Rubber Cover 2/0 AWG - 500 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire nuts for a secure seal.
Contact for Pricing

Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Grey
IPLG3/0-3B
The Polaris IPLG3/0-3B Grey Multi-Tap Single Side Entry Connector features 3 ports sized for 3/0 - 4 AWG Class B, C or D wires or 2/0 - 2 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires with a pre-installed tin plated copper ferule that collapses as the screw is tightened to form a strong connection with fine-stranded wires. Removable access plugs cover the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
Contact for Pricing

NSI Industries · Polaris · Polaris EDGE
ISPB350-4
The Polaris ISPB350-4 Multi-Tap Direct Burial Single-Sided Entry Connector features 4 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

ABB - Electrification · GE · E150
TED113050
The E150 product line consists of Thermal Magnetic Circuit Breakers, Magnetic Circuit Breakers, and Molded-Case Switches rated up to 150 Amps and 600 Volts AC. Catalog numbers include the complete breaker or switch. The WL catalog number suffix indicates that the devices come with Cu/Al line and load lugs. TED 1 POLE 277/480V 14K IC 50 AMP
Contact for Pricing