3P DRIVE CONTR.220A,240/60,L/T

110VDC COIL W/ECON RESISTOR

The softstarter PSTX570-600-70 has a rated maximum operational current of 570 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

A3 30mm Pilot Devices, ,Mushroom Cap

A3 30mm Pilot Lights,,,240V /6V transformer,Amber,LED

RLP FRONT 49.5 X 20 FLUSH FHB DT

100A PM L/C MAIN BKR TOP 22K

COMP ILL PB FLUSH MOM RED 24V 1NO

BOLTON MAIN STRP KIT XT5 W/FLLR

3P, 200A, 110-120 V 50/60 HZ,0/0

3P BAR, 200A, 110-120 V 50/60 HZ,1/1

M12-8 pin connector for connection to the safety controller in the cabinet.