Cable Clamp Heavy Duty Natural .312" 100

Wire Marker Cards (C) vinyl impregnated cloth markers 1.5" long

Cable Clamp Heavy Duty Natural .562" 100

Caution Buried Communication Line Below - Detectable Tape - 6" x 1000' Consists of a minimum 5 mil overall thickness with no less than a 35 gauge solid aluminum foil core, which allows for easy detection of underground utilities. Specially formulated to resist degradation by elements normally encountered in soil. All printing is encased to avoid ink rub-off with environmentally safe ink.

Caution Buried Electric Line Below - 3" x 1000 Yellow Used for the protection, location and identification of underground utility installations. Impervious to alkalines, acids and other soil components. Consists of a 4 mil overall thickness, inert 100 percent virgin low-density polyethylene plastic film formulated for underground use. Environmentally safe ink.

Power Distribution Block (1) 500 MCM-4 AWG Primary (4) 4/0-6 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

Voltage Markers 12470 Volts, 1ea. 9x2.25"

Voltage Markers 24 Volts, 1ea. 9x2.25"

Large Power Distribution Block Cover Large power distribution block covers are see through, clear acrylic covers to permit visual inspection. Snaps easily into place. For use with connector blocks series with prefix AL.

Manual 35" Cable Cutter - 1000 MCM APPLICATIONS: Rugged and lightweight manual cable cutter for use with fiberglass. FEATURES: LENGTH: 32" WEIGHT: 9 pounds CABLE CAPACITY: 1000 MCM FOR USE WITH: Fiberglass MAX INSULATION DIAMETER: 1.90 REPLACEMENT BLADES: Part # CCM-1000RB (Sold Separately)

NSI's NO/NC SPDT Magnetic Reed Switch is a Single-Pole, Double-Throw switch. It draws no power while in the closed position, but when the magnet is applied, the common reed swings from the normally closed state to the normally open contact. When the magnet is removed, the reed contact moves back to the normally closed contact.

The Polaris IPLD350-3 Multi-Tap Dual-Sided Entry Black Connector features 3 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.