Two Way Coax Splitter

Wire Marker Cards (#12) vinyl impregnated cloth markers 1.5" long

Heavy Duty Copper C Tap Grounding Connector for 350 MCM to 4/0 AWG APPLICATIONS: Copper "C" Taps ensure positive, all-around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

The NSI UC-102 Bronze Heavy Duty U-Bolt Clamp is designed to grip 1/2" rods and ground 1/4" IPS pipes in parallel or 90-degree positions with an easily adjusted, durably strong design. The high-copper-content alloy of the clamp provides excellent conductivity and heavy-duty strength, alongside the silicon bronze nuts and lockwashers. Use this U-bolt for demanding applications in harsh environments, including direct burial in earth or concrete. Stock products you can rely on—stock NSI.

Cable Clamp Heavy Duty Natural .312" 100

Wire Marker Cards (C) vinyl impregnated cloth markers 1.5" long

Cable Clamp Heavy Duty Natural .562" 100

Caution Buried Communication Line Below - Detectable Tape - 6" x 1000' Consists of a minimum 5 mil overall thickness with no less than a 35 gauge solid aluminum foil core, which allows for easy detection of underground utilities. Specially formulated to resist degradation by elements normally encountered in soil. All printing is encased to avoid ink rub-off with environmentally safe ink.

Caution Buried Electric Line Below - 3" x 1000 Yellow Used for the protection, location and identification of underground utility installations. Impervious to alkalines, acids and other soil components. Consists of a 4 mil overall thickness, inert 100 percent virgin low-density polyethylene plastic film formulated for underground use. Environmentally safe ink.

Power Distribution Block (1) 500 MCM-4 AWG Primary (4) 4/0-6 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

Voltage Markers 12470 Volts, 1ea. 9x2.25"

Voltage Markers 24 Volts, 1ea. 9x2.25"